What should I do if my phone screen keeps jumping?

How to solve the problem that the mobile phone screen always jumps

Use anti-static mobile phone film and anti-static screen wipes to reduce screen jumps caused by static electricity. Change the input method of the mobile phone to the built-in input method. restart cellphone. Back up files and restore factory settings.

Some third-party software (such as one-click screen lock) will conflict with the system's own lock screen, resulting in screen jumps, such as jumping to the lock screen interface, camera interface, etc. It is recommended to uninstall the lock screen. third-party software. It may be that there is high-strength magnetic field interference around the mobile phone, causing the mobile phone screen to jump.

One-click acceleration and clearing background programs. If there are too many background programs or abnormal programs resident in the background, the touch screen effect may be affected. It is recommended that you use one-click acceleration or clear background programs before trying again.

If you use a non-original film, it may affect the touch screen effect. It is recommended that you remove the film and try it or go to the customer service center to reapply it. If you use a non-standard charger, it may affect the touch screen function of the phone when charging. It is recommended that you use the standard charger and data cable to charge.

If you are consulting about an Honor mobile phone and your phone has a touch screen failure, you can troubleshoot according to the following methods: To ensure the accuracy of the troubleshooting results, please make sure before troubleshooting: the screen surface is clean and free of oil stains and water Stains, etc., and the presence of liquid on the screen surface may cause the touch screen to jump around and become insensitive.

Why is the mobile phone screen jumping around?

Hardware damage causes touch failure. Falling of the phone, loosening of the LCD screen cable after liquid intrusion, and corrosion of the touch IC. These hardware damages will cause This causes the screen to drift and touch to malfunction.

Cause 1: The touch screen operation may be incorrect. When clicking, the finger touches the key position accurately, and when sliding, the finger remains in contact with the screen. If it is a mobile phone with virtual buttons, in order to prevent accidentally touching the upper icon, a small blind zone is set at the top of the virtual button. If you click on the blind zone, there will be no response.

Unstable network signal, current generated on the screen surface, mobile phone cable problems, system problems, etc. may cause the mobile phone screen to keep jumping. You can try the following operations to solve the problem: turn on the mobile phone and go through Settings-Developer Options-Display The screen updates and unchecks this option.

*Note: Please check whether a one-click lock screen application is installed. Some third-party one-click lock screen software will conflict with the system's own lock screen, resulting in random jumps, such as jumping to In situations such as the lock screen interface, it is recommended to uninstall third-party one-click screen lock and other types of software.

What should I do if my mobile phone screen fails and jumps randomly?

One-click acceleration to clear background programs. If there are too many background programs or abnormal programs resident in the background, it may affect the touch screen effect. It is recommended. You can speed up or clear background programs with one click and try again.

If the problem of random jumping or ghosting occurs only when charging in a fixed place, it may be caused by unstable power supply voltage. It is recommended that you change the charging place (replace the power supply).

If the screen of your Honor mobile phone automatically jumps randomly, it is recommended to troubleshoot as follows: Please check whether the phone automatically jumps when it is charging or connected to a computer.

First of all, you need to check whether the touch screen of the mobile phone is faulty and open the program that comes with the Huawei mobile phone. Then find the "Hardware and Physical Connection" item in -- and click to enter.

The reasons why the mobile phone screen fails and jumps randomly include not using the original charger, insufficient battery, static electricity, water on the screen or being in a humid environment, hardware problems, unstable power supply voltage, etc.

First open the iPhone, then click on Options. Click Options. Click to turn on the switch to solve the problem of the touch screen failing and jumping around.

What should I do if my mobile phone screen keeps malfunctioning and jumping around?

1. One-click acceleration to clear background programs. If there are too many background programs, or there are abnormal programs resident in the background, the touch screen effect may be affected. , it is recommended that you use one-click acceleration or clear background programs before trying again.

2. If the problem of jumping or ghosting occurs only when charging in a fixed place, it may be caused by unstable power supply voltage. It is recommended that you change the charging place (replace the power supply).

3. When the user is using the mobile phone, if the screen fails, the user can press and hold the home button while the screen is locked, and then the voice control function can be enabled. The user can also wait for the phone to run out of power. Afterwards, the phone will enter a state of automatic shutdown.

How to solve the problem of mobile phone touch screen jumping

One-click acceleration to clear background programs. If there are too many background programs, or there are abnormal programs resident in the background, it may affect the touch screen effect. It is recommended to use a Key acceleration or clearing background programs before trying again.

If the problem of random jumping or ghosting occurs only when charging in a fixed place, it may be caused by unstable power supply voltage. It is recommended that you change the charging place (replace the power supply).

It is recommended to wipe off the water on the surface of the phone before using it for touch operations. Please confirm whether the charger is Honor's standard charger. When charging while using the touch screen, the power supply voltage may be unstable, which will cause greater interference to the touch screen, thus affecting the touch screen experience.

It is recommended to uninstall third-party "one-click screen lock" and other types of software. If the above methods still cannot solve your problem, it is recommended that you back up important data in advance (third-party applications such as QQ and WeChat need to be backed up separately), and bring your mobile phone, standard charger, data cable and relevant purchase receipts to a nearby Huawei customer Service center inspection.

vivo mobile phone touch screen automatically jumps and automatically touches the screen processing method: 1. One-click acceleration to clear background programs. If there are too many background programs or abnormal programs resident in the background, it may affect the touch screen effect. We recommend that you Use one-click acceleration or clear background programs and try again.

If you are using a Huawei mobile phone and the touch screen automatically jumps and touches the screen, you can troubleshoot the operation through the following methods: If the problem of jumping or ghosting occurs only when charging in a fixed place, it may be the power supply. Due to unstable voltage, it is recommended that you change the charging location (replace the power supply).

What should I do if my phone always jumps the screen?

One-click acceleration to clear background programs. If there are too many background programs, or there are abnormal programs resident in the background, it may affect the touch screen effect. We recommend that you Use one-click acceleration or clear background programs and try again.

If the screen jumping phenomenon of the mobile phone is indeed caused by a problem with hardware components, then you need to go to an after-sales service center or a professional mobile phone repair shop to detect and repair the fault. If repairs are expensive, consider replacing your phone with a new one.

If the problem of jumping or ghosting occurs only when charging in a fixed place, it may be caused by unstable power supply voltage. It is recommended that you change the charging place (replace the power supply).

vivo mobile phone touch screen automatically jumps and automatically touches the screen processing method: 1. One-click acceleration to clear background programs. If there are too many background programs or abnormal programs resident in the background, it may affect the touch screen effect. It is recommended that you Use one-click acceleration or clear background programs and try again.

If you use a vivo phone and the touch screen jumps randomly or automatically touches the screen, you can refer to the following processing methods: One-click acceleration to clear background programs. If there are too many background programs, or there are abnormal programs resident in the background, it may be affected. For touch screen effects, it is recommended that you speed up with one click or clear background programs before trying again.

If the touch screen of your mobile phone automatically jumps and touches the screen, you can operate it through the following methods: If the problem of jumping or ghosting occurs only when using a third-party charging device or charging in a fixed place, it may be due to the power supply voltage. Due to instability, it is recommended that you replace the Huawei charger or charge elsewhere (replace the power supply).

The above is the detailed content of What should I do if my phone screen keeps jumping?. For more information, please follow other related articles on the PHP Chinese website!