Is it difficult for a novice to assemble a computer by himself?

Assembling a computer may seem complicated, but it is not out of reach for novices. PHP editor Xinyi will introduce you to the process of assembling a computer for beginners in a simple and easy-to-understand way, from zero basics to mastery, and solve common problems one by one. If you are interested in learning how to build your own personal computer, don’t miss the detailed guide below, which will take you step by step through the fun of building a computer!

Is it difficult for a novice to assemble a computer by himself?

For novices who have never assembled a computer, assembling a computer may be difficult. However, if you follow the correct steps after learning and understanding the relevant knowledge, and handle each step carefully and carefully, then assembling a computer is not a particularly difficult task.

Before assembly, you need to master the relevant knowledge of computer hardware, such as CPU, motherboard, memory, hard drive, etc., and prepare the corresponding tools and accessories. When disassembling and installing some parts, you need to pay attention to the static electricity environment and perform operations in the correct order.

In addition, novices can get help from the following ways: view relevant video tutorials, read guides, ask experienced friends for help, etc. In short, with sufficient preparation and careful operation, it is not particularly difficult to assemble a computer yourself.

Novices buy the configuration and assemble their own computers. How do they assemble it?

I have opened a Dian Ao repair shop before. In fact, the motherboard, CPU, memory, power supply, and hard disk can be installed according to the motherboard instructions. You can also look at other people’s installation photos to know which components are plugged into the computer. The accessories on it are generally plugged in incorrectly. Don't force it in. I'll find a picture for you to take a look.

As long as the interface is plugged in, you can usually prepare an empty U disk to install the system U disk system on the computer. Just go to Baidu to download a Chinese cabbage and install it directly in the next step

http://www.lotpc.com/zjjc/6281.html

There are also tutorials here that you can refer to. It's very simple at first, but some things I haven't done yet feel very troublesome. If you do it, it's actually very simple.

What should I buy first if I am a novice assembling a computer?

To assemble a computer, in addition to purchasing the accessories needed for a good computer, you also need to prepare a Phillips screwdriver. The computer configuration is as follows. Host part:

1, CPU. The heart of the computer is responsible for calculations;

2, the graphics card, the display core of the computer, is used to process image data. If you are a gamer or graphics worker, you need a discrete graphics card. If you use it to surf the Internet, you don't need to buy a discrete graphics card;

3, memory. Used to exchange data between the CPU and the hard disk for temporary storage;

4, hard disk. All files of the computer are stored here;

5, motherboard. The various components of the computer are placed on the motherboard and work together;

6, power supply. Supply power to each component;

7, chassis. Used to protect all components inside the chassis. Peripheral part: 1. Monitor. Used to display computer images; 2. Keyboard and mouse. Used to operate computers; 4. Audio. Used to output sound; 5. Camera. Used for photography, video chatting, taking photos, etc.; 6. Microphone. Used for voice input, voice chat, etc.

Is it difficult for a novice to buy accessories and assemble a computer by himself?

It’s not difficult. Many of today’s accessories can be operated without a screwdriver. Basically, you only need a pair of hands. Unlike in the past, you had to have a complete tool box.

Assembling a computer yourself is the most economical. When the hardware is the same, the assembled machine saves 20%-30% of the money than the finished machine.

1. There are three key points in building your own machine: knowing how to configure it, knowing how to buy it, and knowing how to install it.

"Being able to configure" means to determine what grade to configure based on your own usage requirements and economic conditions, write down a computer hardware configuration list, and then buy according to the list. This requires you to have a sufficient understanding of the various hardware that can be installed on the computer. Otherwise, you will not be able to write it. If you cannot write it yourself, you can ask your friends for help.

"Being able to buy" is the most important step in assembling your own computer. Just like going to the market to buy watermelons, if you can bargain and choose, you can spend less and buy delicious watermelons. On the other hand, if you spend a lot of money, you won’t be able to buy delicious melons.

To be able to buy computer hardware, you need to master the brand, performance and market conditions of these hardware, and you must also have the ability to identify authenticity and fakeness, and then shop around and negotiate for a deal. The hardware purchased in this way is of good quality and costs less. The computer assembled with these high-quality and low-cost hardware will naturally be a cost-effective machine.

"Knowing how to install" is relatively easy. It just means assembling the hardware you bought as required. The host is the big one, and you need to include the motherboard, CPU, memory, graphics card, and sound card. , network card, hard disk, optical drive, power supply, etc., put them into the chassis and connect them well. Next, connect the monitor, mouse, and keyboard to the host, then connect them to the power supply, boot up the operating system, and you're done.

If you are a computer novice and want to "know how to configure, buy, and install" a computer, it is far from enough to just rely on what I said above. It is best to ask someone who knows how to help you and ask him to accompany you. Let's build a computer together. Through building a computer, you will learn a lot of computer knowledge, and you can successfully buy a phone that you are satisfied with and has high cost performance.

I want to assemble a computer by myself, is it easy?

To assemble a computer, you must first understand what accessories are needed: motherboard, CPU, memory, graphics card, hard drive, radiator, chassis, etc.

The first thing we bring is the most entry-level Intel computer configuration solution, which uses: Celeron G4900 processor. It is cheap and has acceptable performance. It can easily meet the needs of ordinary office work, daily Internet access, casual games, etc. of. Of course, we can also reduce the budget. For example, choosing H310 that supports DDR3 memory version, paired with DDR3 memory, can reduce some budget. However, you cannot choose a configuration that is too low for the installation. If you have higher storage requirements, you can also use 240G solid state The hard drive was replaced with a 1T mechanical hard drive.

The following introduces an intel Pentium G5400 computer configuration plan

Processor intel Pentium G5400

Radiator overclocking San Jade Bird 3 radiator

Graphics card CPU built-in UHD610 Nuclear display

Memory ADATA colorful 4G DDR4 2400

Hard disk Western Digital (WD) Green series 240G solid state drive

Chassis Xianma Dreamer

Power supply Xingu Nuclear Power-Cruiser C5 Power Supply (rated 300W)

The above is the detailed content of Is it difficult for a novice to assemble a computer by himself?. For more information, please follow other related articles on the PHP Chinese website!