What's the reason why workstation computers' performance scores are much lower than those of assembled computers?

Workstation computers run far lower than assembly computers, which is a headache for many users. The reason may involve many factors. PHP editor Yuzai will explain to you the reasons for the low performance of workstation computers and provide some optimization suggestions. Understanding this knowledge will help you improve the performance of your workstation computer.

Why is the performance score of workstation computers lower than that of assembled computers?

First of all, when was your workstation launched? Hardware updates are very fast. Workstations in the past two years are probably not as good as today's assembled computers. Secondly, it depends on what kind of workstation it is. For example, one of our workstations has a main frequency of only 2.7G. But it has a 32-core CPU and 128GB of memory. It has strong parallel processing capabilities and is much faster than my home computer (i4790K@4G 16G memory). I hope it is useful to you.

What are the benefits of a workstation computer?

The workstation computer runs relatively stably and the configuration is relatively high

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

Memory stick 8G two, 500 yuan

Keyboard and mouse 100 Yuan

List for assembling a computer?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it

Assemble the computer, okay?

Assembling a computer can have some benefits, such as:

1. Customized configuration: Assembling a computer can choose the appropriate hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.

2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a branded machine. You can save costs by choosing more cost-effective hardware.

3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.

4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.

However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may cause compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.

Computer bed assembly?

There are drawings when you buy a computer desk, just assemble it according to the drawings

How to assemble a computer?

1. First connect the VGA cable to the monitor, and then fix the two screws at the back. The main reason for fixing is to worry about the connecting wire falling off when moving.

2. Then connect the other end of the VGA cable to the computer host.

3. Next, connect the power cord to the monitor. (Note that you are only connecting to the monitor. Do not connect the other end of the power cord to the socket. Wait until all connections are completed before turning on the power.)

4. Next, connect the mouse to the host.

5. Connect the keyboard as well. (The green one is the mouse, and the purple one is the keyboard. Also note that the internal pins of the mouse and keyboard plugs must be aligned with the pinholes in the interface before they can be inserted.) Connect one end of the network cable to the RJ45 interface of the computer host, and then connect the other end to the switch or router or modem.

6. Next, connect the power cord of the host.

7. Next, you can connect the power plugs of the host and monitor to the sockets to power on the host and monitor. You can start and use it normally.

Assemble computer configuration?

CPU Memory Motherboard Solid State Drive Power Supply and Chassis

I want to assemble a workstation, how to match it?

Decide whether to use a single-channel or dual-channel workstation according to your needs. Currently, the available configuration ideas are as follows: low-end INTEL XEON E3 single-channel series (four cores and eight threads) mid-range INTEL XEON E5 dual-channel series (Twelve cores and twenty-four threads) High-end INTEL XEON E5 dual-socket series (sixteen cores and thirty-two threads) For details, please refer to the Preconcal website - Products - PCC TW210G2 Series

Workstation desktop computer configuration plan?

The computer host used is an i7 8700K processor. Generally, PS software, AI software, and PR video editing software are used. I feel that my current computer configuration is sufficient. The operation is also relatively smooth. Graphic design has high requirements on the host, and ordinary hosts will run very laggy. Let me recommend a computer host configuration to you. For reference only, it all depends on personal preference.

Go to a physical store to install the machine for your boss. Do not buy online. Very moist. Don't be fooled. At least physical stores don’t dare to lie! I once bought one online and was deceived. It was very watery and I have never bought a console online since then.

Processor: For the processor, you can use i7 8700K, which I use very well. You can check online and get a higher one if possible, i7 9700k or higher. The processor is the brain of the computer, and the speed of response depends on the processor and memory.

RAM. My machine uses a 16G one from Kingston Corsair. I personally feel it's enough. Kingston is a big brand after all. The Corsair is owned by a Kingston company. under its banner. If you feel that the 16G one is too small, go for the 32G one. The higher the better. Generally, 16 or 32 is enough.

As for the hard disk, a solid state drive plus a mechanical hard drive are used. The solid state drive is used to install the system and the installation path of your design software. You can choose a solid-state drive for the installation path of the design software. Generally, 512 is enough. The response speed of solid state drives is much faster than that of mechanical hard drives. A 1T hard drive can be installed. Used to store your files and software.

In terms of graphics card. Take Leadtek Professional Graphics Card. It can play a very good role in design. Design software also has very high requirements for graphics cards, but Leadtek graphics cards are not cheap. You can search online. I use Leadtek 2G.

Use a true 500W power supply, or higher, so that the power supply is sufficient.

The motherboard should be z370 or higher, with overclocking function and fast response speed!

The chassis is optional,

The above is the detailed content of What's the reason why workstation computers' performance scores are much lower than those of assembled computers?. For more information, please follow other related articles on the PHP Chinese website!