Home > Article > Computer Tutorials > What is the difference between wire cutting computer host and ordinary computer host?
There are significant differences between the wire cutting computer host and the ordinary computer host, which has triggered many questions. In order to answer these questions, PHP editor Yuzai has sorted out the relevant information to provide you with an in-depth analysis of the differences between these two types of hosts. This article will focus on the following aspects: the core components and functional differences between wire-cutting computer hosts and ordinary computer hosts to help you understand their respective characteristics and applicable scenarios more comprehensively.
The difference between the wire cutting computer host and the ordinary computer host is:
1. Some wire cutting computer hosts are directly composed of home computer wire cutting expansion card control software. This type of host is similar to Ordinary computer hosts are basically the same.
2. The wire cutting computer is composed of industrial control PC motherboard wire cutting expansion card control software, which is very different from ordinary computer hosts. Industrial control PC boards such as industrial control 104 boards follow industrial control standards and are reliable. The performance and anti-interference design have been greatly enhanced, and it is more compact. The memory is directly welded to the motherboard using SMD memory modules instead of memory sticks.
3. The wire cutting computer is controlled by a special DSP and generally adopts a multi-CPU control structure, which is completely out of the scope of ordinary computers. The first two types also use DOS systems, and most of the latter do not require an operating system or software. Completely implemented by professional software.
Look at the interface. The HL card can be used on Ben 4 computers, as long as there is a PCI slot (white) on the motherboard. YH cards can only be used on computers like Pen 3 or 586, because YH cards only support ISA interface slots, which are only available on old motherboards. Of course, if you just plug in the HL card to control the machine tool, it feels like a waste to use a good computer, and some computers on the market now do not support HL cards.
If you can buy a new industrial computer, it is the best choice. Don’t buy too much hard drive when buying a computer. After all, it relies on it to store drawings. If you lose the drawings, you will be in trouble. I do wire cutting processing. The above is my personal opinion. I hope it will be helpful to you.
The above is the detailed content of What is the difference between wire cutting computer host and ordinary computer host?. For more information, please follow other related articles on the PHP Chinese website!