How to assemble a computer? How to assemble a computer chair?

How to assemble a powerful computer? Assembling a computer may seem complicated, but it's easy to master a few key steps. PHP editor Baicao will lead you to explore the secrets of assembling a computer, from selecting the appropriate hardware to step-by-step installation. Next, let us embark on the assembly journey to build our own high-performance computer.

How to assemble a computer?

1. First connect the VGA cable to the monitor, and then fix the two screws at the back. The main reason for fixing is to worry about the connecting wire falling off when moving.

2. Then connect the other end of the VGA cable to the computer host.

3. Next, connect the power cord to the monitor. (Note that you are only connecting to the monitor. Do not connect the other end of the power cord to the socket. Wait until all connections are completed before turning on the power.)

4. Next, connect the mouse to the host.

5. Connect the keyboard as well. (The green one is the mouse, and the purple one is the keyboard. Also note that the internal pins of the mouse and keyboard plugs must be aligned with the pinholes in the interface before they can be inserted.) Connect one end of the network cable to the RJ45 interface of the computer host, and then connect the other end to the switch or router or modem.

6. Next, connect the power cord of the host.

7. Next, you can connect the power plugs of the host and monitor to the sockets to power on the host and monitor. You can start and use it normally.

How to assemble a computer chair?

1

First install the casters one by one on the chair legs. After installing the chair legs, place the air pressure rod vertically into the center of the chair legs

2

Then fix the chassis to the seat with screws

3

Then connect the chair back and seat, and insert the base vertically on the air pressure rod

4

Finally install the armrests and headrests and you’re done

How to assemble the computer host tutorial?

Preparation before installation

Before assembling the computer, you should first learn the basic knowledge of the computer, including hardware structure, daily maintenance knowledge, common troubleshooting, operating system and commonly used software installation wait.

Preparation of accessories before installation

You must have your own plans for installation, do not blindly compare, and purchase accessories according to actual needs.

When purchasing a chassis, you should pay attention to rationalizing the internal structure to facilitate installation. Second, pay attention to the appearance and matching the color with other accessories. Generally, you should choose a vertical chassis instead of the obsolete horizontal chassis, especially the power supply inside the chassis, which is related to the stable operation of the entire computer. Its output power should not be less than 250 W. Some processors also require 300 W. The power supply should be selected according to needs.

In addition to the chassis power supply, other required accessories generally include motherboard, CPU, memory, graphics card, sound card (some sound cards come with the motherboard), hard disk, optical drive (including VCD optical drive and DVD optical drive), floppy drive , data lines, signal lines, etc.

How to assemble the computer configuration sheet?

The simplest way is to tell your boss your needs and ask him to configure it for you. Find a few more companies and the basic configuration will come out, both online and offline.

Then take the part you care about most, for example, if you are a game dog, then you need a CPU or a badass, if you are a design lion, then the graphics card must be strong enough, and make an enhancement, basically it is almost the same

DIY installation tutorial, how to assemble a computer?

The steps to assemble a computer are as follows

1. The first step is to open all the accessories and open the chassis.

2. The second step is to install the CPU and CPU fan, and place the memory module in the corresponding card slot.

3. In the third step, first install the motherboard foot nuts, and then place the motherboard into a stable chassis to secure it.

4. The fourth step is to arrange the cables according to the instructions.

5. The fifth step is to connect the power supply and the host assembly is completed.

6. The sixth step is to connect the host and the monitor. First connect the VGA cable to the monitor, and then fix the two screws at the back.

7. Step 7. After the fixation is completed, connect the other end of the VGA cable to the computer host.

8. The eighth step is to connect the power cord to the monitor, and the computer assembly process is basically completed.

How to assemble a computer display?

1. The base of monitors purchased online is generally separated from the monitor. After docking the base and the monitor, screw the bolts to the connection between the base and the monitor according to the hole positions.

2. Then find the connection port and power cord position of the monitor, then tighten the connection between the monitor bracket and the monitor to complete the fixing of the monitor bracket.

3. Find the interface cable of the monitor, take out the protective cover, and connect the monitor interface and the interface cable.

4. Find the interface cable of the monitor, take out the protective cover, and connect the monitor interface and the interface cable.

5. After connecting, connect the monitor power cord to the power source, then connect the cable to the same port on the computer, turn on the computer, and see the screen loading to confirm that the display connection is completed effectively.

How to assemble the tablet?

There is zero possibility of assembling a tablet by yourself.

First, tablet computers require very high assembly requirements due to their small components (compared to desktop computers). Second, tablet computers are relatively cheap and do not have much market demand. No manufacturer sells accessories for assembling tablet computers. The emergence of "compatible computers" on desktop computers was due to the high price of computers at that time. It was easier to assemble after the accessories were standardized, and computer enthusiasts could find the fun of DIY. Therefore, various accessories were sold specifically for assembling computers.

How to assemble a new computer?

Step one: Prepare tools. Tools used to assemble computers include plastic rods, screwdrivers, tin foil, etc.

Step 2: Install the motherboard. First put the motherboard into the computer case, and then fix the screws on the case.

Step 3: Install the processor. Place the processor into the CPU socket on the motherboard and lock the processor.

Step 4: Install memory. Place the memory module into the memory slot on the motherboard and secure the memory module in place.

Step 5: Install the graphics card. Insert the graphics card into the PCI slot on the motherboard, and then secure the graphics card.

Step 6: Install the hard drive. Insert the hard drive into the SATA interface on the motherboard, and then secure the hard drive.

Step 7: Install the CD-ROM drive. Insert the optical drive into the IDE interface on the motherboard, and then secure the optical drive.

Step 8: Install the power supply. Plug the power supply into the chassis and secure the power supply in place.

Step 9: Wire the computer. Wire various parts of the computer, including the wiring between the motherboard and the power supply, the wiring between the

graphics card and the power supply, the wiring between the hard disk and the power supply, the wiring between the optical drive and the power supply, etc.

The last step: install the operating system. Install the operating system onto the hard drive. Once the installation is complete, the entire process of assembling the computer can be completed.

How to inspect the assembled computer?

1.

is to check the packaging. First of all, the box must be new and not too old. The parameter information on the side of the box must be accurate. Make sure it is the model you want. After all, there are many businesses who like to fish in troubled waters and give machines with lower-level configurations and similar appearances to digital novices. Secondly, the box must have a seal. All laptops I have tested, as long as they are new machines, regardless of brand or price, have seals on the outside of the box. I have never seen one without them. And some first-line brands have high-tech seals. No matter how you tear them off, they will leave marks on the box body, which cannot be restored or removed. They are difficult to forge and are a very important identification point. Although there are some merchants who will replace the entire set of packaging boxes with new ones to fool digital novices.

2.

is to check the fuselage. After unpacking, please carefully check side A first. This is the easiest place to leave traces of use. If there are scratches on side A, there is probably something wrong with the machine. Then shake it and listen to see if there are any abnormal noises or if any parts fall out. Look at the interface to see if there are any traces of plugging or unplugging. Open and close the screen again to see if there is any creaking sound. If so, please return it on the spot. Because even if it is a new machine, it is defective and has quality issues.

Then, if there are no problems, then check the bottom case screws and laptop screws. As we all know, they are extremely soft. As long as they have been screwed, they will definitely leave traces. For gaming laptops, you can also take a look at the air inlets and heat dissipation fins. Machines that have mined mines are running at high intensity. There will be dust in the air inlets and heat dissipation fins. There will also be traces of oxidation. They are black and can be seen at a glance. Can recognize.

How to choose to assemble a computer?

When choosing to assemble a computer, pay attention to the following parts:

1. Look at the price. Choose a computer that suits your price based on your budget. Be careful not to buy a computer with too low a configuration at an exorbitant price;

2, look at the performance. Buy it at a reasonable price based on the computer performance you need. Be careful not to buy a computer with low specs at an exorbitant price. The complete configuration of the computer is as follows. Host part: 1. CPU. The heart of the computer is responsible for calculations. The more cores, the better the performance; 2. The display core of the graphics card and computer is used to process image data. If you are a gamer or graphics worker, you need a discrete graphics card. If you use it to surf the Internet, you don't need to buy a separate graphics card;

3, memory. Used for CPU and hard disk to exchange data for temporary storage. The more memory you have, the better the performance will be;

4, hard disk. All your computer's files are stored here. The harder the hard disk is, the more files it can store;

5, the motherboard. The various components of the computer are placed on the motherboard and work together;

6, power supply. Provide power to each component;

7, chassis. Used to protect all components inside the chassis. Peripheral part: 1. Monitor. Used to display computer images; 2. Keyboard and mouse. Used to operate computers; 4. Audio. Used to output sound; 5. Camera. Used for photography, video chatting, taking photos, etc.; 6. Microphone. Used for voice input, voice chat, etc. The following is a brief description: 1. Dual-core processor, 2G memory, integrated graphics card, mechanical hard drive. The performance is sufficient for surfing the Internet, watching movies, chatting, working, and playing small games such as chess; 2. Quad-core processor, 4G memory, independent graphics card, and mechanical hard drive. The performance is sufficient for surfing the Internet, watching movies, chatting, working, making pictures, playing stand-alone games or online games; 3. Quad-core processor, 4~8G memory, mid-to-high-end independent graphics card, mechanical hard drive or solid-state hard drive. The performance is sufficient for surfing the Internet, watching movies, chatting, working, making pictures, and playing large-scale stand-alone games or large-scale online games; 4. Six-core processor, 8G or above, high-end independent graphics card, mechanical hard drive or solid-state drive. The performance is sufficient for surfing the Internet, watching movies, chatting, working, drawing, and playing large-scale enthusiast-level stand-alone games or large-scale online games.

The above is the detailed content of How to assemble a computer? How to assemble a computer chair?. For more information, please follow other related articles on the PHP Chinese website!