What configuration is better for assembling a computer now?

Now when assembling a computer, what configurations are more suitable? As a portal website for the computer hardware industry, PHP editor Yuzai has compiled a detailed guide, covering all aspects from CPU, graphics card to memory, solid state drive, etc. to help everyone find the best configuration that suits their needs. If you're planning on building a new computer, read on for specific recommendations.

What configuration is better for assembling a computer now?

Assembled desktop computer configuration

1. High configuration desktop computer Recommendation:

First choice 1: Intel G1620 dual-core H61M motherboard. (Low price, good performance, great value!)

Preferred 2: Intel G1840 dual-core H81M motherboard. (Core graphics card performance is stronger than G1620)

2. Recommendation for mid-level models:

First choice 1: Intel G3250 dual-core H81M motherboard GT740 independent graphics.

Preferred 2: AMD The power consumption is higher and the temperature is higher, and the stability of long-term operation is lower than that of Intel. Secondly, the price of the matching interface motherboard is higher.

Although the X4 860K uses a new core, the technology has been improved, and the power consumption has been reduced. However, due to the lower frequency and the fact that the new core has not been substantially improved, the performance is weaker than the X4 760K (but the margin is very small) Less than 3%, so they can basically be regarded as having the same performance)

APU preferred: A8-6600K A85/A88 (not worthy of independent graphics)

A8-6600K is a cost-effective The current price of a high-end processor is much lower than that of the A10-7700K (what may surprise you is that the CPU performance of the latter is even lower)

How profitable is it to assemble a computer now?

What is the general profit of a computer?

Branded computers: (excluding commercial machines and servers) the profit is about 15% of the price, and 5% of the price is the highest for low-end assembled computers. That's 10%.

If you are assembling a low-end performance computer. The profit is about 150~200.

If you are assembling a computer with mid-to-low-end performance, the profit is about 200~280.

If you are assembling a mid-to-high-end performance computer. The profit is about 280~400.

If you are assembling a high-end computer, the profit should be around 450~600.

In fact, the profits from computer assembly come only from motherboards, graphics cards, memory, chassis, hard drives, monitors, power supplies, DVDs, and CPUs.

Among them, if calculated according to mid-to-high-end performance, the graphics card is about 380, with a profit of about 30, the memory is 4G, 85 per piece, with a profit of about 30, the motherboard is 750, with a profit of about 50, and the hard disk is 500G. The price About 400, with a profit of about 50, the 22-inch monitor is 500, with a profit of about 50, the chassis is 200, with a profit of about 30. In fact, power supplies and DVDs have relatively small profits, and the profit together is about 30. CPU4 core, about 500, makes a profit of 70.

Do I need to plug in a network cable when assembling a computer now?

Now when assembling a computer, you do not need to plug in a network cable. When assembling a computer, you need to install the motherboard, CPU, memory, hard disk, power supply, etc. into the chassis, and then install the power cord and each connecting cable, and assemble the various components. If you need to install the operating system in the future, you can use a USB flash drive to install the operating system. You can drive each hardware without being connected to the Internet. The whole process does not require plugging in a network cable. Is it still cost-effective to buy accessories and assemble a computer by yourself now?

Just answer it briefly!

For notebooks, you can only buy a complete machine. This is common sense. You must be sure of all kinds of problems yourself. At most, you can add more memory sticks!

For desktop computers, it is best to configure it yourself, because the so-called after-sales service for brand-name machines is very superficial. If there is a problem, it is better to install a system to solve it yourself, saving you a week of wrangling with them, and brand-name machines, Buying it for 8,000 yuan is not even as good as buying it yourself for 4,000 yuan... It's absolutely true. Do you usually add an optical drive when assembling a computer nowadays?

It is still useful to add an optical drive when assembling a computer now. You can install the system using U disk, hard disk installation method, etc., but:

1. The motherboard driver is better than the CD-ROM driver that comes with the machine when you purchase it, which requires a CD-ROM drive;

2. If To burn CDs, such as music CDs, software CDs, etc., you need a CD-ROM drive;

3. If you need to use a CD-ROM to install the system (there is no U disk, there is a problem with the U disk, or the U disk cannot be displayed), you need a CD-ROM drive;

4. When installing the wireless network card driver (the driver that comes with the wireless network card is usually a CD), a CD-ROM drive is required.

What drivers need to be installed now to assemble the computer?

1 When assembling a computer, you need to install drivers for the motherboard, graphics card, sound card, network card, printer and other hardware to ensure that the hardware can work properly. 2 The purpose of installing the driver is to enable the operating system to correctly identify and use the hardware device, otherwise the hardware may not work properly or work abnormally. 3 In addition, some commonly used software and tools need to be installed, such as anti-virus software, browsers, office software, etc., to meet personal and work needs.

What are the benefits of assembling a computer?

There are many advantages to building your own computer, but there are also certain disadvantages. Advantages:

1. Transparent configuration. Users can choose the hardware they want according to their own preferences.

2. Upgrade the scalability. The hardware of the flexible assembly machine can be freely selected, so the scalability is improved. For example, some motherboards have more expansion slots.

3. High cost performance (know how to configure computers) The price of computers assembled by yourself is cheaper, and the performance will be higher than that of ordinary brand machines. Disadvantages: 1. Generally, it does not come with any software (except the driver). The assembly machine does not have some software that comes with the brand machine. 2. After-sales service The after-sales service is not as good as that of brand-name machines. If there is a problem, you can only take the computer to the computer store for inspection.

What is a complete set of assembled computers?

Complete computer assembly refers to the assembly of computer hardware and the installation of software, mainly for computer DIY. Those who need to do it must have a certain knowledge of computer hardware and understand the current hardware models and prices; the software installation is relatively simple, just follow the prompts.

If you buy a brand-name machine and the hardware and system are installed, this problem will not exist.

What are the disadvantages of assembling a computer?

Assembling computers is also commonly referred to as "DIY", often referring to desktop computer assembly. I briefly summarized it, and there are probably the following shortcomings:

01. In terms of hardware, buyers purchase chassis, motherboards, switching power supplies, hard drives, memory sticks, optical drives, etc. according to personal preferences during assembly. Set up for assembly. There are many brands on the market, and the quality must be good or bad. After assembly, there may be problems with hardware compatibility, stability, etc. When buying a computer assembled by a brand factory, it will undergo a series of strict tests on hardware, software, high and low temperature, pressure, etc. before leaving the factory. There will basically be no "DIY" problems, and the stability and compatibility will be better.

02. The driver of an assembled computer may not be as optimized as that of a branded computer. Brand manufacturers have professional testing teams to test the entire machine, and the drivers are continuously optimized during the testing to make the software more compatible.

03. Brand computers will undergo EMC and other electromagnetic compatibility tests. If they fail the test, they cannot be sold on the market. As for the assembled computer, if this test is not done after the assembly is completed, the electromagnetic compatibility may not be satisfactory.

What accessories are needed to assemble a computer?

The accessories needed to assemble a computer are as follows: motherboard.cpu.memory.graphics card.hard drive.power supply.chassis. There are also optional accessories to choose according to personal needs, such as: independent sound card, independent network card, etc. There are also various peripherals, keyboards, mice, headphones, mouse pads, etc.

The above is the detailed content of What configuration is better for assembling a computer now?. For more information, please follow other related articles on the PHP Chinese website!