Can the fan on the side of the win7 computer motherboard be removed?

A question that bothers many users: Can the fan on the side of the win7 computer motherboard be removed? PHP editor Xinyi will answer this question in detail to help everyone solve related doubts. Read on to learn more about the purpose of a motherboard side fan, the implications of removal, and best practices so you can make an informed decision.

# Can the fan on the side of the win7 computer motherboard be removed?

The fan on the side of the win7 computer motherboard cannot be removed.

Removing it will affect computer performance and may even damage computer hardware. The fan on the motherboard is the computer radiator. There are two computer radiators on one side, and they cannot be removed. It can also be dismantled, but it cannot be used for more than 2 hours.

What kind of oil should be added to the computer motherboard cooling fan?

Fans on computers (including notebooks) are high-speed light-load bearings. When they first leave the factory, the manufacturer has added an appropriate amount of grease to the inside of the fan bearings. Note that it is grease and not lubricating oil. Why is it not lubricating oil? Woolen cloth? Because the fluidity and volatility of lubricating oil cannot meet the working requirements of computer fans, the computer fan should actually be filled with grease. Grease has the advantages of high dropping point, strong stability, and non-volatility, so the computer fan should be filled with lubricating oil. The manufacturer adds grease instead of lubricating oil. The application conditions of computer fans are relatively simple, and the selection of grease is very simple. It's enough to consider temperature, longevity and noise. According to experience, the fan bearing temperature is about 25 to 80 degrees Celsius, which is a medium temperature. General No. 2 lithium-based grease can work within 100 degrees for a long time. Therefore, high-quality No. 2 lithium-based grease can meet the requirements. However, experiments have shown that the higher the temperature resistance level of grease, the longer its service life. Within the allowable temperature range, for every 15 degrees increase in operating temperature, the service life of grease is halved. Considering that it is not easy to disassemble and assemble once, and the dosage is so small, it is recommended to use synthetic grease if possible XD. That is, synthetic lubricants with complex thickeners. This kind of grease can withstand temperatures up to 150 degrees and has a lifespan more than three times longer.

How to remove the fan on the computer motherboard?

The fan on the computer motherboard needs to be disassembled. Here are some basic steps: 1. Protect the motherboard: Make sure the motherboard is not powered and prepare the corresponding tools (such as screwdrivers, small wrenches or brushes, etc.).

2. Remove the fan’s fixing pin: First remove the fan’s fixing pin, and use a small wrench to loosen the four screws between the fan and the motherboard.

3. Loosen the fan: Gradually loosen the screws on the motherboard until the fan is removed. If the fan is fragile, you can use a small wrench to strengthen it first.

4. Install the new fan: Place the new fan into the motherboard and tighten the screws. Note: During installation, be sure to ensure good contact between the fan and the motherboard to ensure the heat dissipation effect.

The temperature of the south bridge of Gigabyte motherboard G41 is too high. I want to add a fan. How much does it cost?

This requires removing the original heat sink. Go to Taobao to buy a south bridge radiator for tens of yuan.

How much is the CPU fan?

The CPU fan power supply is 12V current 0.3A.

The greater the power, the stronger the fan wind force and the better the heat dissipation effect. The power of the fan is directly related to the speed of the fan, which means that the higher the speed of the fan, the more powerful the fan will be. Most fans sold on the computer market are DC 12V, and the power ranges from 0.

We cannot emphasize high power one-sidedly. It only needs to match the power of the CPU itself. If the power is too high, not only will the cooling effect not be greatly enhanced, but it may increase the workload of the computer and ultimately shorten the time. CPU and fan lifespan. Therefore, when selecting the CPU power, you should consider the "heat"

The above is the detailed content of Can the fan on the side of the win7 computer motherboard be removed?. For more information, please follow other related articles on the PHP Chinese website!