What are the steps to assemble a computer host? Worried that computer host assembly is too complicated? PHP editor Youzi brings you detailed steps for computer host assembly, so novices can easily get started! Learning host assembly can not only save assembly costs, but also gain a deeper understanding of computers. Please continue reading the following content!
Preparation before installation
Before assembling the computer, you should first learn the basic knowledge of the computer, including hardware structure, daily maintenance knowledge, common Troubleshooting, operating system and common software installation, etc.
Preparation of accessories before installation
You must have your own plans for installation, do not blindly compare, and purchase accessories according to actual needs.
When purchasing a chassis, you should pay attention to rationalizing the internal structure to facilitate installation. Second, pay attention to the appearance and matching the color with other accessories. Generally, you should choose a vertical chassis instead of the obsolete horizontal chassis, especially the power supply inside the chassis, which is related to the stable operation of the entire computer. Its output power should not be less than 250 W. Some processors also require 300 W. The power supply should be selected according to needs.
In addition to the chassis power supply, other required accessories generally include motherboard, CPU, memory, graphics card, sound card (some sound cards come with the motherboard), hard disk, optical drive (including VCD optical drive and DVD optical drive), floppy drive , data lines, signal lines, etc.
In addition to machine accessories, you also need to prepare screwdrivers, needle-nose pliers, tweezers and other tools to be used.
In addition, before installation, power plugs, etc. must be prepared indoors. These contents have been described in Chapter 1, Section 1.4.
Basic steps for installing a computer
When assembling a computer, you should follow the following steps in an orderly manner:
(1) The installation of the chassis mainly involves disassembling the chassis. Seal it and install the power supply in the chassis.
(2) Installation of the motherboard, install the motherboard on the chassis motherboard.
(3) To install the CPU, insert the required CPU into the motherboard processor socket and install a cooling fan.
(4) To install the memory module, insert the memory module into the motherboard memory slot.
(5) For the installation of the graphics card, select the appropriate slot according to the graphics card bus.
(6) Installation of sound card. Most of the mainstream sound cards on the market now are sound cards with PCI slots.
(7) Driver installation mainly focuses on hard disk, optical drive and floppy drive.
(8) The connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.
(9) Close the chassis cover (Theoretically, you can close the chassis cover after installing the host, but in order to check for future problems, it is best not to cover it first, and wait until the system is installed. cover it later).
(10) Installation of input devices, connecting keyboard and mouse to integrate with the host.
(11) Installation of output devices, that is, installation of monitors.
(12) Recheck each wiring and prepare for testing.
(13) Power on the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings.
After performing the above steps, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.
(14) Partition and format the hard drive.
(15) Install the operating system, such as Windows 98 or Windows XP system.
(16) After installing the operating system, install drivers, such as graphics card, sound card and other drivers.
(17) If the hardware is faulty after 72 hours of baking, it will be discovered during the 72 hours of baking.
··
The process of assembling a computer
For people who don’t have much contact with computers, they may feel that “installing” is a very difficult and mysterious task things. But in fact, as long as you install it yourself, you will find that it is nothing more than that (of course, you'd better have a general understanding of the various accessories of the computer first). After the preparations for assembling the computer are ready, the actual operation of assembling the computer begins.
(1) When you open the outer packaging of the chassis, you will see many accessories, such as screws, blanks, etc.
(2) Then take off the casing of the chassis, and we can see the drive bay used to install the power supply, optical drive, and floppy drive. Many cases do not provide a dedicated bay for the hard drive, which can usually be installed on the floppy drive bay.
The entire frame of the chassis is made of metal. It includes a five-inch fixed frame (can be used to install optical drives and five-inch hard drives, etc.), a three-inch fixed frame (can be used to install floppy drives, three-inch hard drives, etc.), and a power supply fixed frame. Rack (used to fix the power supply), bottom plate (used to install the motherboard), slot (used to install various plug-in cards), PC speaker (used to make simple alarm sounds), wiring (used to connect various signal indicators) As well as switching power supply) and plastic feet, etc., as shown in Figure 11.1 (the picture here has the power supply installed, but in fact the newly opened chassis does not have the power supply installed).
l Drive Bay. There is a baffle in front of the drive compartment, which can be removed when installing the drive. The well-designed plastic baffle on the front of the chassis uses a plastic barb connection method to facilitate disassembly and reinstallation. There is usually an iron baffle inside the chassis that can be removed at one time.
l The blank behind the chassis. The bracket at the back of the chassis is the bayonet on the rear panel of the chassis. The motherboard's keyboard port, mouse port, serial and parallel port, USB interface, etc. must be connected to peripherals through the holes in this bracket.
l Signal line. Underneath the drive bay, we can see the leads leading from the chassis panel to the Power and Reset keys, as well as some indicator lights. In addition, there is a small speaker called PC Speaker, which is used to sound prompts and alarms. There are corresponding sockets on the motherboard.
Some chassis have a small white plastic box at the bottom, which is used to install the chassis fan. The four sides of the plastic box are designed with bayonet holes. You only need to snap the fan into the box. Some larger chassis will also reserve positions for the second and third fans of the chassis.
The process of assembling a computer
For people who don’t usually have much contact with computers, they may feel that “installing” is a very difficult and mysterious thing. But in fact, as long as you install it yourself, you will find that it is nothing more than that (of course, you'd better have a general understanding of the various accessories of the computer first). After the preparations for assembling the computer are ready, the actual operation of assembling the computer begins.
(1) When you open the outer packaging of the chassis, you will see many accessories, such as screws, blanks, etc.
(2) Then take off the casing of the chassis, and we can see the drive bay used to install the power supply, optical drive, and floppy drive. Many cases do not provide a dedicated bay for the hard drive, which can usually be installed on the floppy drive bay.
The entire frame of the chassis is made of metal. It includes a five-inch fixed frame (can be used to install optical drives and five-inch hard drives, etc.), a three-inch fixed frame (can be used to install floppy drives, three-inch hard drives, etc.), and a power supply fixed frame. Rack (used to fix the power supply), bottom plate (used to install the motherboard), slot (used to install various plug-in cards), PC speaker (used to make simple alarm sounds), wiring (used to connect various signal indicators) As well as switching power supply) and plastic feet, etc., as shown in Figure 11.1 (the picture here has the power supply installed, but in fact the newly opened chassis does not have the power supply installed).
l Drive Bay. There is a baffle in front of the drive compartment, which can be removed when installing the drive. The well-designed plastic baffle on the front of the chassis uses a plastic barb connection method to facilitate disassembly and reinstallation. There is usually an iron baffle inside the chassis that can be removed at one time.
l The blank behind the chassis. The bracket on the back of the chassis is the bayonet on the rear panel of the chassis. The motherboard's keyboard port, mouse port, serial and parallel port, USB interface, etc. must be connected to peripherals through the holes in this bracket.
l Signal line. Underneath the drive bay, we can see the leads leading from the chassis panel to the Power and Reset keys, as well as some indicator lights. In addition, there is a small speaker called PC Speaker, which is used to sound prompts and alarms. There are corresponding sockets on the motherboard.
Some chassis have a small white plastic box at the bottom, which is used to install the chassis fan. The four sides of the plastic box are designed with bayonet holes. You only need to snap the fan into the box. Some larger chassis will also reserve positions for the second and third fans of the chassis.
11.2.2 Installing the power supply
The location for placing the power supply in the chassis is usually at the upper end of the rear of the chassis. There is a screw hole on each of the four corners at the end of the power supply. They are usually arranged in a trapezoidal shape, so pay attention to the direction when installing. If installed upside down, the screws cannot be fixed. You can first place the power supply on the power supply bracket, align the 4 screw holes, and then tighten the screws.
When installing the power supply into the chassis, be aware that the power supply is usually installed in reverse, that is, upside down. Just align the screws on the power supply with the holes on the chassis and tighten the screws.
Tips: There is a principle when tightening screws, that is, do not tighten them first, wait until all the screws are in place, and then tighten them one by one. The same goes for installing certain other accessories, such as hard drives, optical drives, floppy drives, etc.
11.2.3 Installing the motherboard
There are many holes on the side panel of the chassis, which are used to fix the motherboard. There are some mounting holes around and in the middle of the motherboard. These holes correspond to some round holes at the bottom of the chassis and are used to fix the motherboard. When installing the motherboard, you must first install positioning screws in the holes at the bottom of the chassis. (Positioning The screw slots are selected according to the type of motherboard. If appropriate, one or two plastic positioning cards can be placed instead of metal screws).
Then lay the chassis down, install the copper expansion screws on the motherboard bottom plate (also aligned with the screws on the motherboard), and then place the motherboard on the bottom plate. At the same time, pay attention to aligning the I/O interface of the motherboard with the corresponding position on the back of the chassis (the position pointed by the arrow in the picture). The peripheral interface of the ATX motherboard should be aligned with the corresponding baffle hole on the back of the chassis.
Note : The keyboard port, mouse port, serial and parallel port and USB interface of the motherboard should be aligned with the holes of the cover on the back of the chassis. The motherboard should be parallel to the bottom plate and must not overlap, otherwise it will easily cause a short circuit. In addition, there are printed circuits for signal lines near the screw holes on the motherboard. When connecting to the chassis bottom plate, be careful not to short-circuit the motherboard with the chassis. If the motherboard mounting holes are not insulated, they must be insulated with insulating washers. It is best to fix one or two studs on the chassis first, usually near the keyboard jack (AT motherboard) or I/O port (ATX motherboard). When using a pointed plastic card, the pointed end must be on the front of the motherboard.
The above is the detailed content of What are the steps to assemble a computer host?. For more information, please follow other related articles on the PHP Chinese website!

win11开机未能正确启动怎么办?我们在使用电脑的过程中会遇到电脑不能正常使用的问题出现,一般出现这种情况有很多,下面就让本站来为用户们来仔细的介绍一下win11开机未能正确启动解决方法吧。win11开机未能正确启动解决方法方法一:卸载新的应用程序如果电脑在安装新应用后未正确启动,可进入安全模式卸载它们以修复问题。1、在高级选项窗口中单击启动设置。2、在启动设置窗口中按F4以启用安全模式。3、成功进入安全模式系统之后按照正常流程卸载新安装的应用程序即可。方法二:执行系统还原之前我们提到了可能导致

一台新组装的电脑,从安装系统到安装各个硬件驱动的顺序是怎么样的...首先是准备组装的零组件:CPU,CPU散热器,内存,主板,显卡,硬盘,光驱,电源,机箱,除了上述这些东西,你还需要一把大小长短适中且好转的十字螺丝起子,还有平坦的桌面。安装操作系统:首先需要安装操作系统,例如Windows、Linux等。可以使用安装光盘或者U盘进行安装。安装驱动程序:安装操作系统后,需要安装电脑硬件的驱动程序,例如主板驱动、显卡驱动、声卡驱动等。安装向导正在安装驱动程序中,请等待安装完成。部分驱动程序可能会需要

如果我们准备给自己的电脑安装win10操作系统的话,对于安装的过程中发现安装进度卡在海内存知己显示界面的情况,很多小伙伴不知道应该怎么解决。我们可以在系统设置中找到系统恢复,然后将电脑系统重置再重新升级安装即可。详细步骤就来看下小编是怎么解决的吧~win10系统安装卡在海内存知己怎么办方法一:大部分的时候,我们只需要重启电脑就可以正常进入系统了,非常方便。方法二:1、如果我们重启之后无法解决问题,那么可以进入安全模式下的windows设置当中。2、接着点击windows“更新和安全”选项。3、然

华为笔记本win11怎么回退到win10系统?不少的用户们在购买完华为笔记本后用不习惯win11系统就想着能不能更改为win10系统,其实是可以的,下面就让本站来为用户们来仔细的介绍一下华为笔记本win11改win10方法教程吧。华为笔记本win11改win10方法教程创建Windows10安装媒体的步骤如下:首先,你需要准备一个可引导的Windows10安装媒体。可以使用官方的Windows10安装媒体创建工具,也可以下载Windows10ISO镜像文件并制作USB安装盘。2、进入BIOS设置

在现代社会,电脑已经成为我们生活中不可或缺的一部分。然而,当我们购买了一台全新的电脑时,我们通常需要使用U盘来安装操作系统。但是,有没有一种方法可以在新电脑上安装系统,而无需使用U盘呢?本文将介绍一种简单而有趣的方法,让您轻松在新电脑上安装系统。工具原料:系统版本:Windows10品牌型号:HPPavilion15软件版本:Windows10安装镜像文件一、使用网络共享安装系统1、首先,确保您的新电脑和另一台已经安装好系统的电脑连接在同一个局域网中。2、在已安装好系统的电脑上,打开文件资源管理

Win11系统如何安装打印机驱动在Win11系统中安装打印机驱动可能会有一些新的步骤和注意事项。下面我将为大家介绍一种简单的方法来安装打印机驱动。首先,我们需要确保打印机与电脑连接正常。可以使用USB线缆将打印机与电脑连接,或者通过无线网络连接打印机和电脑。确保打印机已经打开,并且处于可用状态。接下来,我们需要找到打印机的驱动程序。通常情况下,打印机会随附一张光盘,里面包含了驱动程序和其他必要的软件。如果你没有光盘,可以尝试在打印机制造商的官方网站上下载最新的驱动程序。一旦你找到了驱动程序,双击

然后win10系统都已经出来很久了,但是win7系统依然是最受用户们喜爱的了,很多的用户们想要将电脑上的系统重装成win7系统,但是不知道怎么去操作,那就快来看看详细的教程吧~光盘系统安装步骤windows7:台式机win764位系统下载>>>台式机win732位系统下载>>>笔记本win764位系统下载>>>笔记本win732位系统下载>>>1.重启电脑,然后在开机界面出来的时候,按下U盘启动快捷键。点击查看你的电脑U盘启动键>

电脑是我们生活中和工作中的好帮手,电脑在使用了一段时间后,系统就会卡顿。此时,就需要重装系统来解决,那么台式电脑怎么安装系统呢?下面小编就和大家分享电脑如何安装系统的步骤吧。1、下后的系统格式ISO文件,将ISO文件和NT6安装器(可自行下载)复制到电脑除C盘以外的其他盘的根目录下,两个文件要在同一目录。2、打开NT6安装器,打开后出现如下图,选择模式2安装。3、重启后进入如下图,在启动选择菜单按下图选择进入。4、点击下一步进入,要全新安装,点击“自定义(高级)”选项。5、点击自定义高级后,出现


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

PhpStorm Mac version
The latest (2018.2.1) professional PHP integrated development tool

Atom editor mac version download
The most popular open source editor

ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function
