What to do if the screen of your mobile phone falls and becomes scratched

What to do if the phone is dropped and colorful streaks appear on the screen

The solution to the dropped phone and colorful streaks on the screen include replacing the cable, replacing the entire screen, replacing the motherboard, etc. Replace the ribbon cable. If the ribbon cable is broken, it means that the ribbon cable connecting the screen and the motherboard is burned or broken. Just replace the ribbon cable.

First, this may be a system problem with the mobile phone software. It is recommended that you try to upgrade the system or return the system version of the mobile phone. The second possibility is that there is a problem with the cable of your mobile phone. It is recommended to go to a mobile phone repair place to check it. If it is a problem with the cable, just replace it.

It may be that the cable connecting the screen and the motherboard is loose. Just check the cable after turning on the computer or replace it. The repair price is relatively low. The most likely reason is that the screen is broken, and the outer screen is broken. In this case, the entire screen can only be replaced, which is relatively expensive.

The LCD screen is damaged. After the mobile phone is dropped, the panel may be cracked or the internal circuits may be damaged due to external force, resulting in damage to the LCD screen and the appearance of blurry and colorful stripes. Just go to a repair center for replacement. The cable is damaged. The cable connecting the screen and the motherboard became loose after the phone was dropped, causing the liquid crystal molecules to be unable to sequence properly and causing colored vertical stripes to appear.

The solution to the problem of colored stripes appearing on the screen after an Apple phone has been dropped is as follows: It may be a problem with the phone software system. We can try to upgrade or return the system version of the phone.

The solution to the problem of colored stripes appearing on the screen after an Apple phone has been dropped is as follows: The cable may be loose. It may be that the cable connecting the screen and the motherboard is loose. The fault is likely to occur at the moment of charging, or when the screen is hit. If the cable is loose, you can go to a mobile phone repair shop to repair it. The repair is cheap. There may be a problem with the system.

What to do if a mobile phone screen is dropped and colorful streaks appear

The solution to a dropped mobile phone screen and colorful streaks is to replace the cable, replace the entire screen, replace the motherboard, etc. Replace the ribbon cable. If the ribbon cable is broken, it means that the ribbon cable connecting the screen and the motherboard is burned or broken. Just replace the ribbon cable.

First, this may be a system problem with the mobile phone software. It is recommended that you try to upgrade the system or return the system version of the mobile phone. The second possibility is that there is a problem with the cable of your mobile phone. It is recommended to go to a mobile phone repair place to check it. If it is a problem with the cable, just replace it.

Maybe the cable is loose. It may be that the cable connecting the screen and the motherboard is loose. The fault is likely to occur at the moment of charging, or when the screen is hit. If the cable is loose, you can go to a mobile phone repair shop to repair it. The repair is cheap. There may be a problem with the system. It can be repaired by restarting the phone, updating the system or flashing it.

What should I do if the Huawei phone has a corrupted screen after being dropped?

1. If the corrupted screen appears when opening the software on the phone, the best solution is to uninstall the current software. Then replace it with similar software with equivalent functions.

2. The cable is broken, that is, the cable connecting the screen and the motherboard is burned or loose. Just replace the cable. The screen is broken, and the LCD screen is broken. There is nothing we can do about it. The most troublesome thing is that the entire screen assembly needs to be replaced, which is very expensive.

3. Hello dear Hello dear According to your Hello dear, according to your description of the problem, after the phone is dropped, half of the screen is damaged and half of the screen is black. In this case, the screen assembly can only be replaced. You can apply for after-sales replacement, or you can replace it at an outside mobile phone store. If you have operational experience, you can also buy a screen assembly online for replacement.

What should I do if my phone falls and the screen becomes cracked

Replace the screen If the screen of your phone is cracked, the most direct solution is to replace the screen. However, replacing the screen requires certain skills and experience. If you do not have these conditions, it is recommended that you go to a professional repair shop for replacement.

Try to force restart the phone. Check whether the phone has been exposed to liquid or dropped. Go to Settings--System Upgrade to check whether the phone is the latest version. If not, you can try to upgrade to the latest system.

If the glass film alone is broken, you can peel off the glass film and install a new film to repair the screen. If the internal screen is broken, press the power button and see if the screen lights up and displays normally. If not, the screen needs to be rectified and replaced.

How to fix the broken screen on your mobile phone

1. Turn off the phone, take off the battery, reinstall the battery later, restart the phone, and try to see if the problem can be solved. For the hardware method, the cause is usually caused by poor contact between the screen cable and the main panel of the mobile phone. Generally, the problem can be solved by re-plugging and unplugging the cable.

2. Restart the phone. When the phone has a blurry screen, the first thing to try is to restart the phone. This method can clear the cache in the phone's memory and solve some temporary problems. The way to restart your phone is generally to press and hold the power button of your phone, select "Restart" or "Shut Down", and then turn it back on.

3. If you are using a vivo phone and the screen of the device appears blurry, please refer to: Restart the device. Please restart the device and observe whether it resumes use.

4. ⒋If the blurred screen still cannot be solved, choose to re-flash the ROM. If the blurred screen phenomenon is not caused by hardware failure, the problem can be solved by re-flashing the ROM.

How to fix a broken screen on your phone

1. Try to force restart the phone. Check whether the phone has been exposed to liquid or dropped. Go to Settings--System Upgrade to check whether the phone is the latest version. If not, you can try to upgrade to the latest system.

2. Apply optical glue to the damaged area of ​​the screen. Use a squeegee to spread the glue evenly. Use UV light to dry the glue, about 10 minutes. Repair complete, like new screen. In fact, if you pay attention to protecting the screen of your mobile phone in life, you can avoid screen breakage.

3. If the blurry screen appears when opening the software on the phone, the best solution is to uninstall the current software and replace it with a similar software with equivalent functions.

4. The cable is broken, that is, the cable connecting the screen and the motherboard is burned or loose. Just replace the cable. The screen is broken, and the LCD screen is broken. There is nothing we can do about it. The most troublesome thing is that it is very expensive to replace the entire screen assembly.

5. Turn off the phone, take off the battery, reinstall the battery later, restart the phone, and try to see if the problem can be solved. For hardware reasons, it is usually caused by poor contact between the screen cable and the main panel of the mobile phone. Generally, this type of problem can be solved by re-plugging and unplugging the cable.

The above is the detailed content of What to do if the screen of your mobile phone falls and becomes scratched. For more information, please follow other related articles on the PHP Chinese website!