How to install CD in desktop computer

How to put a CD in a Dell computer

1. Open the CD-ROM drive: Press the switch button on the CD-ROM drive panel, or through the "My Computer" window in the computer operating system Open the optical drive using the optical drive icon in . Insert the disc: Gently place the disc on the optical drive tray and make sure it is centered.

2. First press the drive disk switch on the right side of the Dell laptop. Then pull out the drive tray on the right side of the Dell laptop. Then put the CD into the drive disk on the right side of the Dell notebook. Then press back the drive disk on the right side of the Dell laptop. Then on the desktop, click the "My Computer" icon.

3. Put the CD in the optical drive of Dell computer. How to put a CD in the computer: 1. First, observe the position of the computer's CD-ROM drive. The CD-ROM drive will be on the right side of the computer. Look for the hardware switch. Press the hardware switch. The CD-ROM drive will automatically pop up, and then put the CD in.

4. How to put a CD in a DELL computer is as follows: Open the computer's CD-ROM drive: Find the switch button of the CD-ROM drive on the front or side of the computer, press the button to open the CD-ROM drive. Insert the disc: Gently put the disc into the disc tray of the optical drive. Make sure that the label side of the disc is facing up. The disc tray should automatically suck in the disc.

5. First, you need to take out the CD that needs to be put into the computer. Touch the button under the laptop's optical drive. The placement tray pops up, as shown in the figure. It is important to align the position and insert the disc. this point is very important. Push it in and check the computer to see if the drive is displayed as shown in the figure.

How to install an optical drive on a computer host

. Click the optical drive switch button to open the optical drive, put the CD in, and press the switch again. The second method: 1. Turn on the computer, enter the system, open "My Computer" and see the drive letter of the optical drive.

A total of 5 steps are required to install the computer optical drive. This video is demonstrated on a win10 computer. The specific steps are as follows: Remove the bezel of the computer host. First, remove the bezel of the computer host. Insert the SATA data cable into the interface. Insert the SATA data cable into the interface corresponding to the optical drive.

The first step is to remove the left and right panels of the computer case and prepare the optical drive. Remove a panel from the chassis reserved for the optical drive. Carefully insert the new optical drive. After inserting it all the way, make the outer edge flush with the surrounding panels.

First of all, please make sure whether your computer has a CD-ROM drive. This is a hardware standard. As shown in the figure below: The notebook optical drive is usually on the right side of the computer and can be opened by touching the button with your finger. The desktop optical drive is usually located on the front panel with a pop-up button. You can find it by looking carefully.

First open the host case and use a screwdriver to remove the screws on the motherboard on the host, remove the baffle, and insert the optical drive into the optical drive slot of the chassis. Then secure it with screws on the front, back and sides of the optical drive. Plug one end of the data cable into the computer's SATA interface first, and the other end into the optical drive's data cable interface.

Where is the button to put the CD in the desktop computer host?

The laptop optical drive is usually on the right side of the computer and can be opened by touching the button with your finger. The desktop optical drive is usually located on the front panel with a pop-up button. You can find it by looking carefully. Please put the CD into the CD-ROM drive with the bright side facing down, then insert it into the CD-ROM drive until you hear a click. Then push the optical drive in.

Open my computer, find the DVD drive, and the right-click menu pops up. The CD-ROM drive will automatically pop up. On the host, where the optical drive is placed, there is a button. Press it and the host's optical drive will pop up automatically. There is a small hole on the optical drive panel. You can open the optical drive by poking it with a paper clip several times.

, click the CD-ROM drive switch button to open the CD-ROM drive, insert the CD, and press the switch again. The second method: 1. Turn on the computer, enter the system, open "My Computer" and see the drive letter of the optical drive.

On the host, where the CD player is placed, there is a button. Press it and the CD player will automatically pop up. There is a small hole on the panel of the optical disc drive. You can open the optical disc drive by poking it with a paper clip several times. Note: Generally, when the optical disc drive cannot eject automatically, choose the third method.

Question 1: How do I open a normal CD on a desktop computer? The CD-ROM drive has an eject button. Right-clicking the CD-ROM drive also has a pop-up option. Question 2: How do I open the CD-ROM on a Lenovo desktop computer? Command: Right-click the CD-ROM drive and eject.

Use the exit key. There is a button with an arrow mark on the panel of the optical drive, which is the eject button. Make sure that the optical drive is powered on and press the eject button to bring out the optical drive tray and place the optical disc into it. Use mouse operation.

How to install Lenovo desktop dvd

The CD installation system first needs to set up the bios CD to start. The specific steps are as follows: After starting the computer, press the keyboard at the prompt "Press DEL to run Setup" Del key on the computer: select the bios function, prioritize boot rights, and set it to the optical drive. After setting, press F10 to save and exit. install the system.

First, to play the disc, you need to find a good disc. Open the computer's optical drive by clicking the button on the right side of the optical drive with your hand. Place the disc according to the optical drive slot, and then close the optical drive. Find the computer shortcut on the desktop and double-click it to open the computer.

How to open the optical drive of Lenovo computer: directly click the power button on the optical drive; click "Computer", right-click the G drive, and click "Eject".

Lenovo computers generally have two hard disk partitions (C drive and D drive) when shipped from the factory. It is strongly recommended to only format the C drive (disk 0, partition 1) to reinstall the system.

, click the host CD-ROM drive button to pop up the CD-ROM drive; 2. Insert the CD-ROM. Solution 3 for putting a CD in Lenovo desktop computer: According to the actual situation of the original poster, you need to know a few steps for driver installation. If you have a system disk CD-ROM drive, you need to change the setting to CD-ROM drive startup so that the computer screen can display.

How to play discs on the computer

1. Operating the computer: Lenovo ThinkPad Operating system: Windows 10 system. How to play discs on the computer. The specific steps are as follows: Prepare the discs you need, Find the CD compartment on the computer host. (As shown in the picture below) Press the button of the CD compartment on the computer, and the CD compartment will pop up.

2. Press the button on the computer's optical drive to open the optical drive. Put the video disc face down and put it into the optical drive. Note that notebook optical drives usually have a card that snaps tightly. Make sure the card is secure. After pushing into the optical drive, the system can automatically start the player and play the video automatically. For example, the Player player in the Win7 system will automatically start and play.

3. Question 1: How to read CDs on a computer. A computer needs a CD-ROM drive to read CDs. There is a button under the optical drive. Press it, which is equivalent to opening a DVD. Put the disc in it, then go to my computer and see a disk that looks like a disc under the hard drive. Double-click to open it.

Where to put the CD in a desktop computer

First press the switch button of the CD-ROM drive on the desktop computer case to turn on the CD-ROM drive. Then put the CD into the CD-ROM drive of your desktop computer. Then press the switch button of the optical drive on the desktop computer case to turn off the optical drive. Then on the desktop, click the "My Computer" icon.

Place the disc on the optical drive tray rack, aligning the center of the disc with the center of the optical drive bracket. Right-click on the drive letter of the "My Computer" optical drive and click "Close". After a while, the CD logo will usually appear on the drive letter of the CD-ROM drive, proving that the read was successful.

, click the CD-ROM drive switch button to open the CD-ROM drive, insert the CD, and press the switch again. The second method: 1. Turn on the computer, enter the system, open "My Computer" and see the drive letter of the optical drive.

The above is the detailed content of How to install CD in desktop computer. For more information, please follow other related articles on the PHP Chinese website!