What to do if the mobile phone screen is not sensitive

What should I do if the mobile phone screen is not sensitive to touch?

The solution to the insensitive mobile phone touch screen is: clean the screen and adjust the touch screen sensitivity. Clean the screen The reason why your phone's touch screen is not responsive may be because there is too much dirt and fingerprints on the screen. Therefore, cleaning the screen is the first step to solve the problem. You can use a special screen cleaner or a microfiber cloth to wipe the screen.

It may be that the solder joints are in poor contact due to a heavy impact, or the circuit may be disconnected. In this case, you can only go to the repair department to repair the phone. You only need to re-solder the solder joints of the phone or directly replace the touch screen. That’s it.

It will cause the touch to be insensitive and unresponsive. It is recommended to wipe off the water droplets on the surface of the phone before using it for touch operations.

A single software is not sensitive to touch in this area: It is generally due to software incompatibility. It is recommended to go to the app store to upgrade the software and provide feedback to the software customer service. All software is insensitive to touch in the same position: the screen may be faulty. Please bring your purchase receipt and mobile phone to the vivo customer service center for testing.

If the touch screen of your mobile phone is insensitive and malfunctioning, it is recommended to check whether the mobile phone has a film on it. If there is any suggestion, cancel the screen film and try again. If the touch screen of your mobile phone completely fails, it is recommended that you restart the machine and observe again. Try to update the mobile phone system version (note: please back up the data in the device before upgrading).

What to do if the phone screen has poor contact

1. It is recommended that you wipe the screen clean before trying; 2. If the screen has a film, it may be because the protective film is too thick, which affects the touch sensitivity of the screen. It is recommended that you replace it with a thinner third-party protective film or go to Huawei Customer Service Center to replace the official protective film.

2. If you are using a vivo mobile phone, you can refer to the following methods for troubleshooting: If the ambient temperature of the device is too low, it may affect the touch screen effect. It is recommended to keep the device at an ambient temperature of 0℃35℃ use. If TalkBack mode is turned on, the touch screen method will change, and the screen will display a green frame when touching the screen.

3. Use transparent glue to stick and tear on the failed area until the screen regains touch control. In this method, you must hold the phone firmly, and do not use excessive force to avoid knocking the phone to the ground.

4.: After disassembling the phone, just wipe it with a cotton swab dipped in a little alcohol. Try not to try it yourself to avoid damaging the phone and making it unusable. 2: If the cable is broken, you need to go to after-sales service to replace it with a new one.

What to do if the touch screen of your mobile phone is not sensitive

When you encounter a touch screen mobile phone that is not sensitive, sometimes it is because there are too many programs running and the phone does not respond at all. At this time, you can Just turn off the power of the phone temporarily and then turn it on again.

The solution to the insensitive mobile phone touch screen is: clean the screen and adjust the touch screen sensitivity. Clean the screen The reason why your phone's touch screen is not responsive may be because there is too much dirt and fingerprints on the screen. Therefore, cleaning the screen is the first step to solve the problem. You can use a special screen cleaner or a microfiber cloth to wipe the screen.

Confirm the ambient temperature. If the ambient temperature of the mobile phone is too low, it may affect the touch screen effect. It is recommended to keep the mobile phone at an ambient temperature of 0℃35℃. Check whether the TalkBack mode in accessibility is turned on by mistake. If the TalkBack mode is turned on, the touch screen method will change, and a green frame will be displayed on the screen when touching the screen.

If you are using a vivo phone and the screen is insensitive, you can refer to the following solutions: Confirm the ambient temperature. If the ambient temperature of the device is too low, it may affect the touch screen effect. It is recommended to keep the device at 0 Use at ambient temperature of ℃35℃.

If you are consulting about an Honor mobile phone and your phone has a touch screen failure, you can troubleshoot according to the following methods: To ensure the accuracy of the troubleshooting results, please make sure before troubleshooting: the screen surface is clean and free of oil stains and water Stains, etc., and the presence of liquid on the screen surface may cause the touch screen to jump around and become insensitive.

The method to deal with an insensitive screen is as follows: Confirm the ambient temperature. If the ambient temperature of the device is too low, it may affect the touch screen effect. It is recommended to keep the device at an ambient temperature of 0℃35℃.

What to do if the mobile phone screen is not sensitive

1. If the mobile phone screen is not sensitive, you can: clean the screen, restart the phone, update the system, turn off the screen saver, and send it for repair. Clean the screen Dust or dirt may be causing the touch screen to become unresponsive. At this time, you can try to clean the screen first, using a clean, soft cloth or paper towel to wipe the screen.

2. If the mobile phone screen is not sensitive, it is recommended to try the following methods to solve the problem: confirm whether the film is attached. A film of poor quality may cause the screen sensing amount to become smaller and become insensitive. Replace the film or remove the film and try again.

3. It may be that the solder joints are in poor contact due to a heavy blow, or the circuit may be disconnected. In this case, you can only go to the repair department to repair the mobile phone. You only need to re-solder the solder joints of the mobile phone or replace it directly. Just touch the screen.

4. If you are using a vivo phone and the screen is insensitive, you can refer to the following solutions: Confirm the ambient temperature. If the ambient temperature of the device is too low, it may affect the touch screen effect. It is recommended to keep the device Use at ambient temperatures of 0°C to 35°C.

5. The solution to the insensitive mobile phone touch screen is: clean the screen and adjust the touch screen sensitivity. Clean the screen The reason why your phone's touch screen is not responsive may be because there is too much dirt and fingerprints on the screen. Therefore, cleaning the screen is the first step to solve the problem. You can use a special screen cleaner or a microfiber cloth to wipe the screen.

The above is the detailed content of What to do if the mobile phone screen is not sensitive. For more information, please follow other related articles on the PHP Chinese website!