How to start preview of uniapp project developed by webstorm

Steps to start UniApp project preview in WebStorm: Install UniApp development tool plug-in Connect to device Setup WebSocket Start preview

In Launching the UniApp project preview in WebStorm

To launch the UniApp project preview, please follow these steps:

1. Install the WebStorm plug-in

• Open WebStorm and go to "Settings" > "Plugins".
• Search and install the "UniApp Development Tools" plug-in.

2. Connect to the device

• Make sure your device is connected to the same network.
• In WebStorm, go to Tools >UniApp Development Tools >Connect Devices.
• Select your device and click Connect.

3. Set up WebSocket

• In WebStorm, go to Tools >UniApp Development Tools>WebSocket.
• Enter your local IP address (for example: 127.0.0.1).
• Set the port number (for example: 5001).
• Click "Save".

4. Launch Preview

• In WebStorm, right-click on your UniApp project folder.
• Select "UniApp Development Tools" > "Launch Preview".
• Select your device.
• The project will be automatically deployed to the device and preview started.

FAQ

• Can’t connect to your device?

  • Make sure your device is connected to the same network.
  • Check if your firewall settings allow communication with the device.

• #Preview freezes or loads slowly?

  • Check that your device is connected to a stable Wi-Fi network.
  • Close other applications that may be using bandwidth.

The above is the detailed content of How to start preview of uniapp project developed by webstorm. For more information, please follow other related articles on the PHP Chinese website!