How to repair data if the memory card cannot be read (correct techniques for recovering data)

How to solve the problem that the memory card cannot be read (correct techniques for recovering data) PHP editor Xigua is here to introduce how to solve the problem of memory card reading failure. When the memory card is in use, reading abnormalities sometimes occur, resulting in data that cannot be opened. In this case, users can use some data recovery software to try to repair the problem, and they need to be careful to avoid further damage to the data during the operation. The following will introduce in detail the correct techniques for memory card data recovery, I hope it will be helpful to everyone.

Method 1: Check the SD card slot

Check whether the SD card is correctly installed into the device. This will cause the device to be unable to recognize the SD card if the SD card is not fully inserted into the device's card reader. It can be cleaned using detergent and a soft brush, please make sure there is no dust or dirt on the SD card. If so, check if the device is damaged and the SD card needs to be replaced.

Method 2: Replace the SD card reader

Then insert it into the card reader and pull out the SD card from the device. Or there is a problem with the card reader port, which may be because the card reader is damaged. To see if you can read the SD card, try connecting the device to another available USB port.

Method 3: Check in Device Manager

Then one of the reasons is that the System Report section in Device Manager is corrupted, if your device Runs slowly. Use the following steps to check your SD card in Windows:

1. Click "This PC" on the desktop and enter the icon "Device Manager" in the search box. Right-click on it, select your SD card from the list of results, and select, 2 "Properties". Click, in the Properties window, 3, "Tools" and then click, the tab "Inspection".

4. Then check whether the SD card can be read normally and wait for the system repair to be completed.

Method 4: Repair SD card using Command Prompt

1. Click "Start" on the desktop and enter in the search box, icon "Command Prompt" and select, "Run as administrator" option. Enter, 2 "chkdsk /fX:" and press Enter, (where X is the drive letter of the SD card). You can also enter "chkdskX:/f" (where X is the drive letter of the SD card) to check and repair the SD card.

Method 5: Format SD card

Then you can consider formatting the SD card if none of the above methods can solve your problem. Please make sure you have backed up important data before formatting. Then click, you can right-click the SD card "Format" button. Select the file system as "FAT32" and click the "Start" button to format the SD card. Wait for the formatting to complete, and then check whether the SD card can be read normally. 5.

Note: Please make sure you have enough storage space to store your data. Formatting the SD card requires a password. You can enter "RECOVERYLE" if you want to delete the volume and press Enter.

Method 6: Consult professional maintenance personnel

Or the data in the SD card is very important, then you can seek help from professional maintenance personnel, if you are not confident about the above method. They have deeper device knowledge and experience to recover and repair your SD card. Please make sure to back up important data in advance, however.

The above is the detailed content of How to repair data if the memory card cannot be read (correct techniques for recovering data). For more information, please follow other related articles on the PHP Chinese website!