Can't enter the computer power-on password

What to do if the mobile hard disk cannot be opened

Solution: The important reason why the mobile hard disk cannot be recognized by the computer or cannot be opened is that the power supply of the USB interface is insufficient. . It is recommended to use a standard mobile hard disk data cable to connect to the computer. The USB data cable that comes with the mobile hard disk has its own "voltage regulating" module inside, which can ensure the normal operation of the mobile hard disk.

The power supply of the USB port is insufficient or there is a problem with the data cable: You can try changing the USB port and data cable to see if the problem still exists.

Mobile hard drives have higher security performance and larger capacity, so they are loved by many staff. But when we use it, the mobile hard disk may not be opened. So how to deal with this problem? Next, the editor will briefly introduce to you how to deal with the mobile hard disk not opening.

There are many reasons why the mobile disk cannot be formatted normally. The most common ones are the write protection of the mobile hard disk or the problem of the hard disk data cable. Of course, the damage of the mobile hard disk will also cause the mobile hard disk to fail to be formatted. We need to find out the mobile hard disk. The reason why the hard disk cannot be formatted is here to solve it.

What should I do if I can’t enter the password when I turn on the computer?

Computer crashes: If the computer has crashed, the keyboard and other devices cannot be used at all. At this point, you can restart the computer. If the fault persists, you need to reinstall the system. There are no input characters in the password input box: Due to misoperation, there are no input characters in the password input box, so input cannot be made.

The reason and solution for being unable to enter a password when the computer is turned on: the keyboard mode is not turned on. Enter the computer BIOS settings and turn on the USB interface. The keyboard has been damaged, making it impossible to type. It is recommended to replace the keyboard. The small numeric keypad above the keyboard is not turned on.

Try to enter the old password: Sometimes the computer will automatically change the password or the previously set password cannot be recognized. Please enter the old password and try again. Restart the computer: Sometimes the computer may have problems such as hardware failure or system failure, causing the keyboard to not work properly. In this case, you can try restarting the computer.

Restarting the computer can solve the problem. If you cannot enter the password when you turn on the laptop, you can try the following solutions: Check the keyboard. Check the keyboard first to make sure it is working properly. If it is abnormal, use an external keyboard or check if the keyboard needs to be replaced. Check whether the password entered is correct.

Enter the old password. What should I do if I cannot enter the password when I turn on the computer? Enter the old password. Check the input method settings: Some input methods may switch to Chinese input mode, making it impossible to enter numbers. You can try pressing "Shift" and "Ctrl" key combinations to change the input method to English mode.

If you cannot enter the password when you turn on the laptop, you can try the following solutions: Check the keyboard. Check the keyboard first to make sure it is working properly. If it is abnormal, use an external keyboard or check if the keyboard needs to be replaced. Check whether the password entered is correct.

What should I do if I can’t enter the password when I turn on my laptop?

1. Hello, I’m happy to explain the reasons and solutions for why you can’t enter your password when you turn on your computer: the keyboard mode is not turned on. Enter the computer BIOS settings and turn on the USB interface. The keyboard has been damaged, making it impossible to type. It is recommended to replace the keyboard. The small numeric keypad above the keyboard is not turned on.

2. The solution to the problem that the computer password cannot be entered is: the computer crashes: If the computer has crashed, the keyboard and other devices cannot be used at all. At this point, you can restart the computer. If the fault persists, you need to reinstall the system.

3. When the computer is turned on to enter the password PIN, the letters cannot be entered because of an input error. The solution is: press the win key and click the button as shown in the picture. In the settings window that pops up, search for the content as shown in the picture, and select options from the pop-up menu.

4. If you cannot enter the password when you turn on the computer, you need to first confirm whether there is a problem with the keyboard. If the keyboard is not working properly, try the following solutions: Check the keyboard connection: Check whether the keyboard interface is plugged in properly. If it is a keyboard with a USB interface, you can try to replace it with a USB interface.

The above is the detailed content of Can't enter the computer power-on password. For more information, please follow other related articles on the PHP Chinese website!