Home >Hardware Tutorial >Hardware News >Notebook memory converter to desktop
1. Notebook memory modules can be installed on desktop computers, but this requires a memory module adapter card. . The specific operation steps are as follows: Tools: notebook, screwdriver, memory adapter card, desktop host.
2. Laptop memory cannot be converted into desktop memory because the lengths and interfaces of the two types of memory are completely different. Laptop memory: Desktop memory: A memory stick is a computer component that the CPU can address through the bus and perform read and write operations. Memory sticks used to be an extension of main memory in the history of personal computers.
3. Notebook memory cannot be installed on a desktop computer. The memory module interface types are divided according to the number of conductive contacts on the gold fingers of the memory module. The conductive contacts on the gold fingers are also commonly called the number of pins (Pins). Because different memory uses different interface types, and the number of pins used by each interface type is different.
1. First open the back cover of the laptop, press and hold the switch button on the back of the computer, and release the card slot. Then use a laptop-specific screwdriver to remove the screws fixing the back panel. After opening the back cover, find the location of the notebook memory module and remove it.
2. Laptop memory and desktop memory are different in appearance, length and number of pins, and the corresponding memory slots are also different, so they cannot be used universally. This is in a different category than DDR4 and DDR3.
3. Step 1: Remove the shell. The user removes the screws on the back cover of the laptop, collects the removed screws in a box to avoid losing them, and then removes the back cover of the computer. Computers are usually marked. Find the location of the memory module, and then remove the cover. Next, the memory module can be seen.
4. Some stores provide both services); when upgrading the CPU, you need to check whether the motherboard supports the CPU (pins, frame, model, process, etc.).
5. DDR4 memory has a main frequency of up to 3000Mhz. However, not all computers support DDR4 memory. It not only requires the CPU to support DDR4 memory, but the motherboard also needs to support DDR4 memory. Simply put, if a computer wants to use DDR4 memory, both the motherboard and CPU must support DDR4 memory.
The notebook memory module can be installed into the desktop computer, but it needs to be implemented through a memory module adapter card. Operation method: First open the back cover of the laptop, press and hold the switch button on the back of the computer, and release the card slot. Then use a laptop-specific screwdriver to remove the screws fixing the back panel.
cannot. Because the interfaces of laptop memory and desktop memory are different. Laptop memory uses the SO-DIMM interface, while desktop memory uses the DIMM interface, and the two are incompatible.
cannot. The specifications of notebook memory are different from those of desktop computers. The two are different in size and have different set parameters. Forcibly using them will cause the desktop computer to fail to operate normally. Therefore, it is best not to use notebook memory on desktop computers.
Laptop memory modules can be installed on desktop computers, but this requires a memory module adapter card. The specific operation steps are as follows: Tools: notebook, screwdriver, memory adapter card, desktop host.
The memory module of a laptop can be installed on a desktop computer, but this requires a memory module adapter card. Operation method: First open the back cover of the laptop, press and hold the switch button on the back of the computer, and release the card slot. Then use a laptop-specific screwdriver to remove the screws fixing the back panel.
cannot. The specifications of notebook memory are different from those of desktop computers. The two are different in size and have different set parameters. Forcibly using them will cause the desktop computer to fail to operate normally. Therefore, it is best not to use notebook memory on desktop computers.
cannot. Because the interfaces of laptop memory and desktop memory are different. Laptop memory uses the SO-DIMM interface, while desktop memory uses the DIMM interface, and the two are incompatible.
At present, it is not universal. Whether it will be universal in the future is still unknown. Differences in appearance: Desktop memory is slender, with a length of 13-14 cm; notebook memory is relatively short, with a length of about 5 cm; interfaces (pins) are different: the conductive contacts on the gold fingers of the memory stick are customarily called the number of pins ( Pin).
Laptop memory modules can be installed on desktop computers, but this requires a memory module adapter card. The specific operation steps are as follows: Tools: notebook, screwdriver, memory adapter card, desktop host.
Laptop memory modules are different from desktop memory modules, and they cannot be used interchangeably. Differences in appearance: desktop memory is slender, with a length of 13-14 centimeters; notebook memory is shorter, about five centimeters.
is unstable. Because the slots of laptops and desktops are different. Laptops use 200-frame SD-DIMMs, and desktops use 240-pin DIMMs. They cannot be used universally, so they cannot be used universally. However, you can buy an adapter card to implement memory. Universal across platforms.
Laptop memory cannot be installed on a desktop computer. The memory module interface types are divided according to the number of conductive contacts on the gold fingers of the memory module. The conductive contacts on the gold fingers are also commonly called the number of pins (Pins). Because different memory uses different interface types, and the number of pins used by each interface type is different.
Laptop memory modules can be installed on desktop computers, but this requires a memory module adapter card. The specific operation steps are as follows: Tools: notebook, screwdriver, memory adapter card, desktop host.
Memory has more or less compatibility risks, so it is recommended that you purchase a memory adapter card equipped with a jumper module. To maximize compatibility with notebook memory.
cannot. Because the interfaces of laptop memory and desktop memory are different. Laptop memory uses the SO-DIMM interface, while desktop memory uses the DIMM interface, and the two are incompatible.
The memory adapter card is like an SD card sleeve. The notebook memory can be installed on it, and then inserted into the memory slot of the desktop computer, so that the desktop computer can use the notebook memory.
Under certain conditions, notebook memory modules can be used on desktop computers. The notebook memory matches the memory of the desktop motherboard. DDR3 memory can only be used on motherboards that support DDR3. Memory adapter cards with jumpers: DDR3 notebook memory has 204 pins, and DDR3 desktop memory has 240 pins.
It is recommended that you try the memory adapter card for desktop and notebook computers, but the memory must be of the same generation. For example, 2nd generation memory and 3rd generation memory cannot be transferred. Other than that, the lengths, sizes, and sockets are all different, so no method will work. This is a comparison chart between laptop memory and desktop memory. You can take a look.
With successful experience and their professional expertise, the company’s founders have set up new investment strategies and techniques and expanded the scope of investment, from the original investment in real estate to the deep-water area of asset investment and management. , and brought this type of investment to the self-employed.
The above is the detailed content of Notebook memory converter to desktop. For more information, please follow other related articles on the PHP Chinese website!