How to install a memory module in a desktop computer

How to install computer memory

General computer motherboards have at least two memory slots. If you only use one memory slot and there are free slots, you can keep the original one. memory module, just insert the new memory module into the free slot.

First, make sure the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just look at the location of the slots and memory gaps. Before inserting memory, first pull out the locks at both ends of the memory slot.

Insert the memory module into the memory slot with moderate force until the latches at both ends of the slot automatically pop up. After plugging in the memory module, cover the host chassis. At this point, the memory module is installed.

Choose the appropriate memory module The first thing to pay attention to is to choose the appropriate memory module, including memory capacity and specifications. The memory capacity and specifications need to be compatible with the motherboard, which can be determined by consulting the motherboard manual or information on the website.

First of all, we need to open the computer host, remove the two screws on the back cover, and then take off the back cover directly.

The method of disassembling and installing the computer memory module is as follows: Pull out the computer main case and observe that there are simple screws on the back of the case. There are 2 upper and lower screws in total. We unscrew them. After unscrewing the screws, hold down the chassis cover and push it to the left, and the main chassis cover will be removed.

How to install a memory module in a desktop computer

1. Open the two bayonet holes on the memory slot of the motherboard and prepare to install the memory. Find the memory module socket. Lift the memory and align it with the location of the memory slot on the motherboard. The notch on the memory is short on one side, so pay attention to the alignment. If they don't match, it means the motherboard and memory cannot match.

2. Align the notch of the memory module with the protrusion of the slot, and tighten it downwards; 2. Lock the buckles on both sides inwards to install the memory module; remove the memory from desktop computers How to use the memory stick: 1. Separate the buckles on both sides outward; 2. Pull out the memory stick upwards.

3. First we need to remove the computer case cover and open the computer host case. Insert the memory stick into the memory slot. After inserting, fasten the handles at both ends of the memory slot. Then we need to gently pull the memory stick to check whether it is firmly installed, and finally close the computer case. The memory module is now installed.

4. This operation takes a Dell computer as an example. The specific steps are as follows: Method 1: Directly insert the thick inner strip. If you feel that it cannot be inserted, then change the direction. If it is inserted backwards, it must not be inserted. Got in.

How to add memory to ASUS desktop motherboard

Find the memory slot on the motherboard, located near the CPU slot, and unlock the slot lock next to the memory slot. Take out the packaging of the memory module and make sure to touch the gold finger part and avoid touching the connecting pins.

How to assemble an ASUS desktop computer The steps to assemble an ASUS desktop computer are as follows: Purchase the required parts. Usually, you need to purchase a motherboard, CPU, memory, hard drive, power supply, graphics card (if necessary), chassis, etc. Install the motherboard on the case.

When changing the circuit, please note that the machine can originally have a single-channel SDP configuration. Since it is upgraded, it must be changed to dual-channel DDP. In this way, the memory performance will be greatly improved, otherwise it will just become a capacity expansion. Instead of upgrading.

Plug it directly into the motherboard and install it like that. There are two steps, open it first, and then plug it in! Just plug it in. First check what kind of memory your motherboard supports. If it supports DDR3, then your DDR2 and DDR won't be able to be used, and you won't be able to install it no matter what.

ASUS motherboard memory overclocking settings: After the computer is turned on, immediately press the "delete" key on the keyboard to enter BIOS [EZ Mode]. In BIOS EZ mode, there is an option X.M.P or D.O.C.P. The default is diabled. Just select enabled.

How to insert a memory module into a desktop computer

First we need to find the memory slot on the motherboard. It is usually near the CPU, has 2-4 slots, and is separated by two different colors. To insert memory, we must first open the switch ports on both sides of the memory slot, and then press it a little further on both sides. It should be noted that both sides must be pressed open.

Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory module. Memory is the bridge in the computer, responsible for data exchange between the processor and hardware such as hard disk, motherboard, and graphics card. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick.

First of all, we need to open the computer host, remove the two screws on the back cover, and then take off the back cover directly.

The memory module of a desktop computer is generally installed on the motherboard, next to the CPU socket on the motherboard. Small boards generally have two memory slots, which can accommodate two memory modules. Medium and large boards generally have four memory slots, which can accommodate four memory modules.

How to replace the memory module in a desktop computer

1. First open the side cover of the chassis, find the memory slot (slender slot, with a buckle at both ends of the slot), and connect the two ends. Open the buckles at both ends, then align the notch on the memory stick with the notch on the slot and insert the card. Press both ends of the memory stick respectively to allow the two buckles in the slot to spring back. The insertion is successful.

2. The specific steps are as follows: First, observe the memory stick. There is a groove in the gold finger part of the memory stick. One side of the groove is obviously longer than the other side. Next, look at the memory slot on the motherboard. It corresponds to the memory module. The interface has different lengths. Gently open the buckles on both sides of the memory slot on the motherboard. There are a few motherboards that can only open one end.

3. Pull out the computer main case and observe that there are simple screws on the back of the case. There are 2 in total on the top and bottom. We will unscrew it. After unscrewing the screws, hold down the chassis cover and push it to the left, and the main chassis cover will be removed.

4. The steps to remove the memory module from a desktop computer are as follows: Turn off the computer and unplug the power plug to ensure safety. To open the case, you usually need to unscrew or press a release trigger to open the case lid. Locate the memory slot, usually located above the motherboard, which can be found through the motherboard manual or logo.

The above is the detailed content of How to install a memory module in a desktop computer. For more information, please follow other related articles on the PHP Chinese website!