Jispace NAS switch mode is online, up to 10G transmission can be upgraded at no cost

According to news from this website on March 26, Extreme Space officially announced today that users with X86 architecture dual network port models have begun to upgrade to push bridge mode (i.e. switch mode) .

It is reported that Jispace equipment is generally equipped with a 2.5G network port, and the Z423 flagship version is equipped with a 10G network port. However, ordinary home LANs are generally equipped with Gigabit networks. In this case, when users use JiSpace to transfer files to their computers, the fastest speed is up to 1Gb/s. Currently, the most common way for users to speed up is to purchase a switch separately or replace the router.

According to the official introduction, the bridge mode is mainly used when there is only one computer at home with a high-bandwidth network port. In this mode, the transmission speed of the LAN will be greatly improved. After the user updates the version, the computer can use the bridge mode to access the Extreme Space, and the Extreme Space device will act as a switch device to realize 10G transmission between the host and the Extreme Space device.

It should be noted that if both network ports are connected to the router in switch mode, a loop failure will occur. Be sure to connect the network correctly before changing the mode. In this mode, the two physical network ports are the same for the virtual machine, so the physical network ports cannot be distinguished. It is more suitable for virtual machine scenarios that require a Bridge network but do not need to distinguish physical ports, such as bypass routers or virtual machines that do not need to specify physical ports. All machines can use this mode. The official network connection diagram attached to this site is as follows:

Bridge mode (i.e. switch mode) connection method:

Using the Z423 Ultimate Edition as For example, the device has a 1G network port and a 10G network port.

First you need to switch the Jispace network mode to [Bridge mode (applicable to virtual switches)]

▲Open the Jispace App and open [System Settings] - [Network related settings], click "Mode Switch", switch to "Bridge Mode (applicable to virtual switch)", then click OK, the JiSpace client operation is completed

Connect the 1G network port to the router, and the other 10G network port to the computer's 10G network port

At this point, the bridge mode connection is completed. At this time, when the computer accesses the Extreme Space, the Extreme Space equipment can function as a "switch" in the process. Users can experience the 10 Gigabit transmission rate in the LAN. At the same time, the Gigabit network speed of the broadband itself is not affected by Influence.

Note from this site: For users using other dual-network port models of Jispace (Z4Pro, Z4S, Z4), after using "switch mode", the transmission speed of a single network port can reach 300 MB/s.

Bridge mode (i.e. switch mode) high-speed transmission application scenario:

When users watch "Blu-ray video", they can drag the video progress bar at will. The official said that "there is almost no lag";

The file transfer speed can achieve a maximum transfer speed of about 1250MB/s, which can improve efficiency when facing complex office scenarios.

Notes on bridge mode (i.e. switch mode):

The switch mode has the same functions as the switch network, so connecting the network cables at both ends to the same switch or router will cause a network loop failure ,When there is no "anti-loop" function in the usage environment or the "anti-loop" function fails, it will cause the home network to be paralyzed.

‎The maximum speed of ZDR is a single disk. Most mechanical disks can reach 280MB/s under the best conditions. As the remaining capacity becomes smaller, the speed will further decrease. Compared with mechanical disks, SSD is easier The bandwidth is full, but it is also related to the cache of the SSD; the above introduction is the theoretical value of bandwidth, and the actual speed measurement follows the "bucket principle". If there is a slowdown in any link, the speed will not be optimal, for example: The JiSpace device is under high load, or other applications occupy the hard disk or bandwidth, etc..

‎Mobile phones or other devices accessed through Wi-Fi are greatly attenuated by wireless speed. The theoretical speed of Wi-Fi 6 is about 2.4Gb/s. The actual speed will also be affected by distance, signal strength, interference, etc. So you need to use a wired network for speed testing.

The above is the detailed content of Jispace NAS switch mode is online, up to 10G transmission can be upgraded at no cost. For more information, please follow other related articles on the PHP Chinese website!