Home >Hardware Tutorial >Hardware News >gtx1060 graphics card power consumption

gtx1060 graphics card power consumption

王林
王林forward
2024-03-23 11:10:472039browse

gtx1060 graphics card power consumption

gtx1060 donut power consumption

1. After actual evaluation: gtx1060 consumes about 625W in low load state. Under high load conditions, the power consumption is approximately 2071W.

2. The GTX1060 graphics card consumes about 120W at full load and requires a power supply with a rated power of more than 400W. If the CPU power consumption is high, it is recommended to equip a power supply with a rated power of 450W.

3.W. Power loss refers to the difference between the input power and output power of equipment, devices, etc. Power loss. In a circuit, it usually refers to the heat energy dissipated on components and devices. Sometimes it also refers to the power required by the complete machine or equipment.

4. The standard GTX1060 graphics card consumes 120 watts at full load. How much power a computer host equipped with a GTX1060 graphics card requires depends not only on the power consumption of the graphics card, but also on the power consumption of all hardware in the host such as the CPU, motherboard, memory, and hard disk.

Can this power supply drive a gtx1060 graphics card?

1. A power supply with w rated power can drive a graphics card with a power of about 150W. In addition, the maximum power of the graphics card is also affected by the CPU, which is also a large power consumer. If it is paired with a CPU with a lower TDP, the power of the graphics card that can be driven by the same power supply will be increased accordingly.

2. The second power supply is Huntkey's multi-core HD6. This power supply was once popular, but it is only rated at 400w. If you want to bring a GTX 1060, to be honest, if it were me, I would not use it if it was not rated at 500w. I don't want to try it, because you can turn it on and drive it with a rated power of 400w, but it is prone to problems when it is fully loaded, which will affect the life of the graphics card.

3. Therefore, if your computer is already equipped with a 400-watt or higher power supply, then it should be able to support the use of GTX1060. However, in addition to power, you also need to ensure that the power supply has enough power connections to connect it to the graphics card.

4. The official thermal design power consumption of the processor R5 2600 in your computer configuration is 65W, and it is expected to reach 100W at full load. The full-load power consumption of the graphics card GTX1060 is just over 200W. The power consumption of other hardware in the computer configuration is much lower, and a combined power consumption of 100W is enough.

5. Enough. The specific reasons are as follows: 450w power supply is enough for i56500 plus gtx1060. GTX1060 is a mainstream-level graphics card with a graphics card power of about 120W. Mainstream-level graphics cards are different from enthusiast-level graphics cards in that the power consumption of graphics cards is relatively low. GTX1060 graphics card requires a system power supply of no less than 400W.

6. How many pins are used in the socket? To make a simple judgment, the maximum power supply capacity of the computer PCI-E interface is 75W. The gtx1060 has two 6PIN graphics card auxiliary power sockets, indicating that 150W and an 8PIN graphics card auxiliary power socket are needed. The power socket can provide power at 90W. The power consumption of other computer hardware is less than 10W.

Is 970 or 1060 a better graphics card?

1. Buy a second-hand graphics card of 1060. I bought the 1060 as a second-hand graphics card because in terms of gaming performance, the GTX 1060 is more powerful than the GTX 970. The GTX 1060 has more CUDAGTX 10 series graphics cards and is more power efficient than the GTX 9 series graphics cards.

2.: The VR additional experience of GTX1060 will be better than that of GTX970980. Due to limitations of current VR equipment, in fact, as long as the graphics card reaches the standard line for running VR, you can play smoothly, and GTX970 is the standard line for N cards, so of course GTX1060 can also run HTC VIVE and Oculus Rift without pressure. .

3. The e31270v3 with 1060 is a cost-effective configuration and is smoother to use. The 970 configuration is moderate and cannot drive the device to operate normally. e31270v3 is equipped with 1060 with strong performance and low power consumption, and 970 with high power consumption and medium performance.

4. The graphics card is 10% to 15% better than 970. In terms of performance, if the 1066 is overclocked, it is probably 10% to 15% better. If both are overclocked to the optimal balance point, the 1066 will lead by less than 5%. If both are overclocked, the 1066 will be almost tied.

5. The performance of the gtx970 graphics card is weaker than that of the gtx1060 graphics card. There will be no problem with your CPU with these two graphics cards. However, according to the principle of buying new rather than old, it would be better to choose gtx1060 graphics card. Because the architecture of the gtx1060 graphics card is updated, the power consumption is also lower than that of the gtx970 graphics card. So now gtx1060 graphics card is better.

6, and 970, 970 mineral cards are more. According to the query of relevant information, the overall performance of the gtx10602g graphics card is higher than that of the gtx970 graphics card, about 5%. The 970 has slightly larger power consumption, while the 1060 and 3G power consumption is lower, and the mining card probability is also smaller.

Graphics card: gtx1060, cpu: i56500, is 400w power supply enough?

1. Graphics card gtx1060 and CPU i5-6500 use 400W power supply. GTX 1060 uses GP106 core with a bit width of 192bit ( GTX 960 is 128bit), with a maximum of 8GB GDDR5 video memory. GP106 core power consumption does not exceed 75W, and 120W at full load is very power-saving. Considering future upgrades, it is recommended that the power supply be considered rated at 450W.

2. The power consumption of I5 and 1060 is relatively low, and the power supply is rated at 400W without any pressure.

3. If it is a normal target, it is barely enough. It is best to use a 500W power supply. Because the best power usage is 50-60%. Using it close to the limit will accelerate aging and cause problems easily. My computer hardware adds up to about 235W, and I use a 500W power supply.

The above is the detailed content of gtx1060 graphics card power consumption. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:codercto.com. If there is any infringement, please contact admin@php.cn delete