How to set up the USB disk to start the notebook Apple?

php The editor of Apple teaches you how to set up your MacBook to use a USB flash drive to boot. The method is simple and easy. With some simple steps, you can easily solve the problem of not starting and let your MacBook start smoothly. Follow the tutorial and you will soon be able to use a USB flash drive to boot your laptop when needed, no longer having to worry about it.

Compared with desktop computers, notebooks and tablets are favored by many people due to their good convenience.

However, laptops and tablets using Windows systems will be limited by hardware, unless you buy very expensive products.

However, this problem is no longer a worry for the editor.

Because, recently I learned to install the Windows system into a USB flash drive, which makes it even more portable.

The tool you need to use is simple, practical, and free Windows to Go!

Windows to Go, referred to as WTG, is an official tool made by Microsoft specifically for mobile office users.

Its function is very simple, that is, to install the Windows system on a removable storage medium, such as a USB flash drive, solid-state USB flash drive, or mobile hard drive, etc.

After that, you can create a portable Windows system, set it to start, and run and use it directly on other devices.

Moreover, one thing is very important, that is, the portable Windows system will not have any impact on the original system of the device.

Because they just share a set of hardware, you don’t have to worry about some of your important data being accidentally leaked.

As soon as you turn off your phone, no one knows what you did.

So, can all mobile storage devices be created using Windows to Go?

The answer is of course: no!

After all, you have to understand that this is installing a Windows system, so there must be requirements in terms of speed, capacity, etc.

Let’s put it this way, the smoothness of system use directly depends on the read and write speed of the U disk or mobile hard disk you choose.

So, if possible, it is best to use a mobile solid-state drive for faster transfer speeds.

If not, a solid-state USB flash drive is also a very good choice, but the capacity needs to be at least 64GB.

As for the Windows system image used to make a Windows solid-state USB disk, it is best to use a native image to ensure good compatibility.

Now, let’s take a formal look at how to operate it.

1. Preparations!

Windows to Go tool, Windows10 image file, solid-state U disk (or mobile hard disk/U disk)

2. Production steps!

First, connect the solid-state U disk to the computer, open Windows to Go, click Browse and find the Windows image, select the solid-state U disk, and click Deploy.

Then, a confirmation window will pop up. Note that the production process requires formatting. If you need to back up, back up in advance, and then click Yes.

Finally, wait patiently for Windows to Go to write the image until the "Writing Complete" prompt pops up, then the mobile Windows system is completed.

3. Steps to use!

Connect the Windows solid-state USB flash drive to the computer, and set the computer to boot from the USB flash drive through bios and other shortcut keys.

For this part of the operation, please refer to the steps for setting up the USB boot disk to start the computer. Different computers use different shortcut keys.

It should be noted that if you are running a Windows solid-state USB disk on an Apple computer, you can use the Option key to set it.

In addition, since the Windows system is located in a storage medium such as a solid-state USB disk, it cannot be removed during use.

At the same time, there is another point that needs to be noted, that is, in order to avoid differences in hardware and affecting actual operations, such as Apple computers, it is best to install the relevant drivers in the Windows solid-state USB disk in advance software.

Okay, that’s it for today’s article, see you next time.

The above is the detailed content of How to set up the USB disk to start the notebook Apple?. For more information, please follow other related articles on the PHP Chinese website!