A blue screen appears as soon as the graphics card driver is installed

What to do if a blue screen appears after the computer updates the graphics card

Incorrectly updating the graphics card driver causes a blue screen. In this case, you can restart the computer, press F8 to enter safe mode, and select the most recent Correct configuration, press Enter to repair. Poor contact or damage to the memory stick causes a blue screen. If this happens, you can open the computer case, pull out the memory stick, and clean or replace it.

Incorrectly installing or updating the graphics card driver is also one of the main causes of computer blue screen failure. Restart the computer and press F8 to enter safe mode. Delete the graphics card driver in the safe mode control panel Add and Delete: Then restart the system normally and reinstall the graphics card driver or change to another version of the graphics card driver.

If you encounter such a problem, you can use recovery software to recover data. The computer cannot start. This requires a tool disk. You can use a 4GU disk to make a USB boot disk. Then set the first startup item in the computer bios to the USB flash drive. Then enter the USB disk system and restore the data.

If the subject's laptop has a blue screen during use, this phenomenon should be caused by excessive hardware overclocking, memory overflow, hard disk read and write errors, etc. It is recommended that the subject check the usage of the hardware after shutting down the computer. And hard drive bad sector repair.

A blue screen occurs after system update: PS: Generally when this happens, you cannot enter the system normally and you need to enter Windows RE to perform related operations. Certain blue screen errors may occur after installing certain updates on your device. If you get a blue screen error after updating, you can try to fix the error by uninstalling the recent update.

Update the graphics card driver. The blue screen is mainly caused by the incompatibility of the graphics card driver. Installing another driver version can solve the problem. Reinstall other versions of the driver. Restart the computer and keep pressing the F8 key until the system advanced boot menu appears.

I downloaded a graphics card driver from the AMD official website. After installing and restarting, I got a blue screen and couldn't enter the safe mode. How to solve it...

After restarting, see if you can enter the safe mode normally. In the safe mode mode, uninstall the graphics card driver cleanly; it is recommended not to use third-party recommended software to install the graphics card driver. You can go to the official website to install the matching driver file.

First, the blue screen may be caused by your graphics card being incompatible with the lock. It is recommended that you uninstall the graphics card driver in safe mode and install the driver from the driver disk that comes with the computer graphics card.

Once a blue screen occurs, you should immediately record the blue screen code, so that you can check the situation according to the code, so that the problem can be easily solved. Suggestions for blue screen after installing the graphics card: A. Boot into safe mode, uninstall the graphics card driver in safe mode and then boot again.

What to do if the computer has a blue screen after installing the system and driver items

Restart the computer. When the list of available operating systems appears, press the F8 key. On the Windows Advanced Options menu screen, select the last Once configured correctly, press Enter. Restore the BIOS to factory default settings. If possible, you can upgrade and refresh the BIOS.

You can use the source files during system installation to repair the system. Run the system, enter the system installation page, click "One-click repair system" to repair the system and restore the system to the state when it was just installed. You can also use system restore to achieve repair.

The rest is a problem and can be repaired. This is also one of the few blue screen codes that can be repaired. The repair method is to find the original system installation disk (or the PE startup interface of Goldfinger V6 has a console repair).

Incorrectly installing or updating the graphics card driver is also one of the main causes of computer blue screen failure. Restart the computer and press F8 to enter safe mode. Delete the graphics card driver in the safe mode control panel Add and Delete: Then restart the system normally and reinstall the graphics card driver or change to another version of the graphics card driver.

The computer has a blue screen after installing the driver. The details are as follows

1. This situation occurs because the graphics card driver is incompatible with the system. Solution: You can use the source files during system installation to repair the system. Run the system, enter the system installation page, click "One-click repair system" to repair the system and restore the system to the state when it was just installed.

2. The reasons that may cause blue screen errors during device use are not always obvious. It may be that the new hardware and drivers used or third-party software are incompatible with Windows devices. You can use the following steps to try to solve the blue screen problem.

3. There are many reasons for the blue screen, including compatibility issues between software and hardware, or hardware failures, etc. You can refer to the following methods for troubleshooting: Please confirm whether the error codes of each blue screen are consistent. If they are consistent, you can confirm the blue screen code and perform simple troubleshooting through the blue screen code.

4. The system will start sorting, and the system will notify you when it is completed. Remove the latest installed hardware and software, replace it with new hardware, and change the software version. Use Tencent Computer Manager, toolbox - hardware detection - check the configuration, update the driver according to the configuration, computer clinic - search for system blue screen - check the repair method.

5. If your motherboard supports BIOS upgrade, you should upgrade to the latest version or install the latest device driver as soon as possible.

The above is the detailed content of A blue screen appears as soon as the graphics card driver is installed. For more information, please follow other related articles on the PHP Chinese website!