Apple mobile phone data cable

What to do if the data cable of your iPhone is not supported

1. The charger is not original: You need to replace it with the original charger plug before charging. If the charger or data cable connector has aged after being used for a long time or the interface is dirty: you can replace it with a different charging head.

2. To solve this problem, you need to replace it with an MFi-certified charging cable. When the data cable connector or charging port of the mobile phone is dirty and damaged, the prompt "This accessory is not supported" will also appear. At this time, you can try cleaning the data cable interface and mobile phone charging port.

3. The IC of the data cable interface is not working properly, the data cable is damaged, and the data cable needs to be replaced. The data cable interface IC works normally, but the code matching between the IC and the mobile phone does not work properly. Maybe the golden finger of the interface is dirty after being used for a long time. Please clean it and try again.

4. It may be that the charger and the socket are loose. Try plugging and unplugging it again. It may also be that the connection between the data cable and the charger is a bit loose. Reconnect it. It is possible that the data cable is broken. Although it is original and genuine, there may be quality issues.

5. Take the mobile phone charger as an example. The Apple cable does not support this accessory. The solution is as follows: It may be that the IC of the Lightning interface of the data cable is not working properly, and the data cable is damaged and needs to be replaced.

6. The most likely occurrence is that Apple’s data cable is not original or has not been Apple’s MFI certified data cable. If your data is fake or fake, it will not be able to charge and this accessory will not be supported.

What are the interface types of Apple mobile phone data cables?

1. There are three types of mobile phone charging cable interfaces, namely Android interface data cable, Apple interface data cable, and Type-c data cable. The data cable is used to connect a mobile phone to a computer, or to connect a mobile phone charger for charging.

2. The Apple charging cable has a lightning interface. The lightning interface is a unique charging interface for Apple products. Its biggest feature is that it is small and can be plugged in from both sides, so it is very convenient to use. You don’t have to worry about the charging interface being plugged in backwards in the dark at night.

3. Apple mobile phones iPhone4s and before use a 30-pin large interface, which is a three-in-one data cable. It is necessary to distinguish the pros and cons, and the charging head is wider and the charging port on the mobile phone is also larger.

How to arrange USB data cables on Apple phones

The arrangement of USB data cables on Apple phones can be as shown in the figure: Side A is arranged as shown in the figure. The arrangement of side B is as shown in the figure.

The four USB wires represent power, ground, signal, and signal-. Take the microUSB data cable of a mobile phone as an example: on the USB end: red: VCC, which is power; white, D; green, D-, black, GND (which is ground). In addition, among the 5 terminals on the microUSB end, there is one The terminal is empty.

The four colors of the USB interface are red, white, green and black. The descriptions of each color are: USB V (red), USB D- (white), USB D (green), USB GND (black).

The two wires of the Apple charging cable are connected red to red, black to black, and then short-circuit the two signal wires.

White line: negative voltage data line (identified as: Data- or USB Port -), green line: positive voltage data line (identified as: Data or USB Port), data + (+3V) black line: Ground (identified as: GND).

There are several types of Apple data cables

1. Apple currently has two common data cables, one is the Lightning interface and the other is the USB-C interface. The Lightning interface is Apple's own unique interface, used to connect devices such as iPhone, iPad, and iPod. The USB-C interface is a universal interface standard that can connect to Apple devices and other brands of devices.

2. There are 2 types of Apple tablet charging cables. According to public information related to the investigation, there are two types of Apple tablet charging cables, one is the Lightning interface and the other is the USB Type-C interface.

3. The original standard data cable provided by Apple for iPhone 12 is Lightning to USB-C, which also means that iPhone 12 will continue to provide Lightning interface, and the USB-C interface that many users are looking forward to will not arrival.

4. There are two types of Apple MFi certification: development license certification and production license certification. Those who intend to develop or assist in the development but not manufacture components can apply for MFi certification; those who intend to manufacture components and have manufacturing equipment can apply for MFi certification.

5. Data cable is used to connect mobile devices and computers to achieve data transfer or communication purposes. Inside is the access tool used to connect to the computer to transfer files such as bell pictures.

The above is the detailed content of Apple mobile phone data cable. For more information, please follow other related articles on the PHP Chinese website!