Home > Article > Hardware Tutorial > Replace the laptop hard drive yourself
1. Another method is to remove your hard drive and directly replace the original hard drive with a solid state drive. In this way, the computer's reading and writing speed and running speed will be significantly improved.
2. Lenovo g40 can replace solid state drive. You can install a solid-state drive according to the following steps: The installation method of a solid-state drive is the same as that of a mechanical hard drive. It is also divided into a power supply port and a data port. If it is a notebook expansion unit, it can be placed on the optical drive. If it is a mechanical hard drive, it can be replaced directly with the corresponding interface. Turn on the hard disk AHCI mode.
3. All can be installed. However, it should be noted that the hard disk interface on the motherboard has two types of interfaces: SATA2 and SATA3.
4. The method to install the solid state drive is: Method 1: If the notebook does not have an optical drive slot, just remove the back cover and install the solid state drive in the original mechanical hard drive location. Method 2: If your laptop has an optical drive bay, remove the optical drive disk, then go online to buy a laptop model optical drive bay hard drive bracket, install the solid-state drive in it and insert it into the computer's optical drive location.
5. First of all, if the notebook has a SATA interface, or the motherboard has an MSATA interface, you can replace it with a solid state.
6. This is a comparison based on experience. It can be concluded that whether you buy it and bring it with you or replace it later, there is actually not much difference in essence. However, everyone knows that solid-state drives have a lifespan and will wear out.
1. Mechanical hard drive (HDD): The price is usually between a few hundred yuan to a thousand yuan. The larger the capacity, the higher the price. Solid-state drive (SSD): The price is usually between 500 yuan and 2,000 yuan. The larger the capacity, the higher the price. Additionally, if you're not sure how to replace your hard drive, you may need to pay additional installation fees.
2. Replacing a solid-state drive generally costs at least a hundred yuan, and a better one costs two to three hundred yuan. Mechanical hard disk (HDD): The price usually ranges from a few hundred yuan to a thousand yuan. The larger the capacity, the higher the price. Solid-state drive (SSD): The price is usually between 500 yuan and 2,000 yuan. The larger the capacity, the higher the price.
3. Replacing a solid-state drive generally costs at least a hundred yuan, and a better one costs two to three hundred yuan. Laptop hard drives are divided into serial ports and parallel ports. Serial ports are more commonly used now, and 160G is around 240G. 320G looks like three hundred and seventy-eight. 500G costs about 400 yuan, and the parallel port is cheaper.
4. Ordinary mechanical hard drive: The price of a 500GB-1TB mechanical hard drive is generally around 200-400 yuan, plus installation costs, there may be a labor fee of 50-100 yuan. If data is accidentally lost, it is recommended to perform data recovery operations.
5. HP notebook repair charging standard Hello, there is no brand differentiation in notebook hard drives. Whether you are HP, HP or HP, hard drives are universal. If you replace a mechanical hard drive or solid state drive, the solid state drive is more expensive.
The method to install a solid state drive in Dell Inspiron 14 laptop is as follows: First prepare a solid state drive. Prepare a hard drive box for the optical drive, and insert the solid-state drive into the optical drive hard drive box interface. Remove the optical drive from your laptop.
Confirm the location of the hard drive on the Internet or in the notebook manual (generally the larger back panel with screws and detachable screws is the location of the hard drive). Remove the laptop battery, remove the hard drive backplane screws, and open the backplane. Remove the screws at the four corners of the hard drive and push it back horizontally (be careful to push back slowly to prevent bending the pins).
Go to JD.com to buy a solid-state drive that meets the requirements. Remove the battery, completely cut off the power, remove the screws that fix the optical drive, and gently pull out the optical drive. Select the appropriate hard drive box and solid-state drive for the optical drive, and replace the fixed accessories and optical drive casing on the optical drive to the optical drive box.
The method is as follows: unplug the power, remove the battery, unscrew the back cover, and take out the optical drive. Then take out the key screw to remove the optical drive, and then you can take out the optical drive (it is recommended to eject the optical drive before shutting down). At the same time, remove the mechanical hard drive and set aside.
Prepare a hard disk box for the optical drive, and insert the solid state drive into the optical drive hard disk box interface. Remove the laptop's optical drive. After removing the screws of the optical drive, use a screwdriver to push down the fixed metal piece, and the optical drive will come out easily. Then, put the optical drive box containing the solid state drive into the optical drive bay of the notebook.
Before operation, please ensure that the solid state drive is installed in the computer and the data cable and power cable are plugged in. Press and hold the DEL key when the computer is turned on to enter the BIOS. After entering the BIOS, use the up and down arrows to select System Summary and press the enter key.
1. The laptop can be replaced with a solid state drive. If you want to remove the optical drive and replace it with a solid-state drive in your notebook, you must purchase an important accessory called an optical drive hard drive bracket. Only through the bracket can you successfully change the optical drive to a 5-inch hard drive.
2. Yes, the current hard drives all have SATA interfaces and can be replaced with solid-state drives. Method 1: Keep the original mechanical hard drive, disassemble the optical drive, and install a solid-state drive with an optical drive in the optical drive. If there is no built-in optical drive, you can also directly install a solid-state drive with an optical drive.
3. If the hard drive to be replaced has an M.2 interface, your laptop motherboard must have an M.2 interface, otherwise it cannot be replaced. The replaced solid-state drive should be partitioned based on capacity and usage requirements.
4. Operating system: Windows 10 The steps for setting up a notebook after installing a solid-state drive are as follows: After installing the hard drive into the computer, turn on the computer and enter the desktop. Press the shortcut key win R to open the run window. In the run window, enter compmgmt. msc, and then click the OK button to open the Computer Management window.
5. The notebook can replace the solid state drive, as long as the motherboard, CPU, etc. support the replaced hard drive. Look at the configuration details, it will be written down, but it will be cheaper to install it yourself, and you can buy an SSD with better performance.
6. The notebook can replace the solid state drive, as long as the motherboard, CPU, etc. support the replaced hard drive. The space taken up by win7 is too large because many junk files have not been cleaned for a long time. Just clean them. The team should note that it is best to prepare the system files for the hard disk in advance, because it usually does not have a system when it is purchased.
The above is the detailed content of Replace the laptop hard drive yourself. For more information, please follow other related articles on the PHP Chinese website!