The computer keeps repairing automatically when it is turned on

Automatic repair occurs when the computer is turned on. What's going on?

1. Damaged system files: Some system files may be damaged or missing, causing the computer to fail to start normally. The system will attempt to automatically repair these files to get the computer back to normal. Wait for the system's automatic repair to complete. This may take some time, depending on the severity of the problem and the performance of your computer.

2. The automatic repair that occurs when you turn on the computer is related to your improper operations before shutting down, such as playing games, watching videos, and operating large things. The card is caused by using the computer for a long time or downloading inappropriate things. Or the system files have been deleted, or the power has been shut down, etc.

3. Use the repair function of Windows system. First try to use the automatic repair tool that comes with Windows to repair the system. The specific steps are as follows: - Restart the computer and follow the on-screen instructions to enter the Advanced Startup Options menu.

4. There is a problem with the system self-check and needs to be repaired. Sometimes it can be repaired and then normal, sometimes it cannot be repaired. It is usually caused by illegal shutdown or updated drivers or patches.

5. The computer shows startup repair because the hard disk file was damaged due to improper shutdown last time. The system is now undergoing detection and repair. The only thing the computer user needs to do is to wait patiently for it to complete, and it will automatically restart after it is completed. If you cannot enter the system after restarting, you need to reinstall the system.

6. Wait for the automatic repair to complete: Sometimes the computer needs some time to complete the automatic repair operation. You can wait for a while to see if the automatic repair can be completed. Restart the computer: Some faults may be temporary and may be repaired automatically after restarting the computer.

What should I do if the computer keeps showing automatic repair when it is turned on?

1. Enter safe mode: When the computer is turned on, press the F8 key and choose to enter safe mode to try to repair system problems. Perform a disk check: Enter the chkdsk r command at the command prompt, which scans and repairs errors and corruption on the hard drive.

2. First try to use the automatic repair tool that comes with Windows to repair the system. The specific steps are as follows: - Restart the computer and follow the on-screen instructions to enter the Advanced Startup Options menu. - In the Advanced Startup Options menu, select Troubleshooting, and then click Advanced Options.

3. You can press and hold the power button until the machine is powered off, then turn it on again, then power off again, repeat 3-5 times until it enters the recovery mode as shown below. ② From the Select Options screen, tap or click Troubleshooting ③ Tap or click Advanced Options, and then tap or click Automatic Repair.

Why the system always repairs automatically when starting the computer

1. Automatic repair when the computer starts is generally caused by the following reasons: Hardware damage: Hard disk, memory, graphics card and other hardware faults are detected. to cause computer startup problems. Virus infection: Viruses, malware or advertising plug-ins in the system cause system files to be damaged and deleted.

2. It may be caused by the computer suddenly shutting down or shutting down, causing disk damage. Generally, the startup repair is related to improper operations before shutting down. Incompatible things may be downloaded; when encountering When the computer is turned on, a prompt indicating that it is preparing for automatic repair is displayed. It is recommended to wait for the automatic repair of the system to be completed.

3. Try to start the computer in safe mode of Windows system. This can help you determine whether the problem is related to hardware or software drivers. While booting, you need to hold down the "F8" key and then select the "Safe Mode" option. Try to use the "System Recovery" function of Windows system to repair it.

4. This is because the system is scanning the hard disk. It may be an operation problem. If you shut down illegally, cut off the power directly or press the power button to turn off the power. When the computer is turned on, the hardware, including the hard disk, will be checked. .

5. If your computer keeps showing that it is preparing for automatic repair, it may be because the system files or hardware are faulty or damaged, causing the system to fail to start normally. In this case, the system automatically attempts to repair, but it may take some time to complete the repair process.

The computer cannot be turned on and keeps showing that it is preparing for automatic repair

You can press and hold the power button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times, until you enter the picture below recovery mode. ② From the Select Options screen, tap or click Troubleshooting ③ Tap or click Advanced Options, and then tap or click Automatic Repair.

The computer always displays automatic repair when it is turned on: If you encounter a prompt that the computer is preparing for automatic recovery when it is turned on, it is recommended to wait for the system's automatic recovery to complete.

Wait for the automatic repair to complete: Sometimes the computer takes some time to complete the automatic repair operation. You can wait for a while to see if the automatic repair can be completed. Restart the computer: Some faults may be temporary and may be repaired automatically after restarting the computer. To resolve these issues, you can first try restarting your computer.

The above is the detailed content of The computer keeps repairing automatically when it is turned on. For more information, please follow other related articles on the PHP Chinese website!