Home >Hardware Tutorial >Hardware News >After turning on the laptop, the screen goes black with only the mouse

After turning on the laptop, the screen goes black with only the mouse

PHPz
PHPzforward
2024-02-21 10:09:213653browse

After turning on the laptop, the screen goes black with only the mouse

The notebook computer has a black screen after turning on the computer. Only the mouse can be seen. What is the reason why the black screen is caused by the software? Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. This situation is a black screen on the laptop caused by software.

A black screen may occur when the computer starts up because the motherboard, monitor and graphics card in the computer are damaged, or the computer configuration is too old. Most of the reasons are caused by process errors. You can follow the steps below to troubleshoot.

A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. If your computer turns on and a black screen appears, but the mouse arrow can move, it may be a problem caused by the explorer.exe system file.

The reason why a Lenovo laptop has a black screen when it starts up boils down to the following points: First, check whether the power contact connected to the laptop is good and whether the power indicator light is on. Friends who are qualified recommend using a multimeter to test whether the laptop power supply has power. Voltage output with the value indicated in the label.

What to do if the laptop has a black screen but the mouse can move?

1. What to do if the laptop has a black screen and only the mouse can move? You can try restarting. Most problems can be solved by restarting. You can try to keep pressing the F8 key. If the interface shown below appears, it can start normally. If that still doesn't work, keep pressing the power button to force a shutdown and try turning it on again after a while.

2. Try to use system restore to restore the system. If an application or driver was recently installed on your computer, you can try to uninstall it before restoring the system. If none of the above resolves the issue, you may need to reinstall your operating system. Before reinstalling, important files and data need to be backed up.

3. The notebook screen is black, but the mouse can be moved. This is when the system is entered, but the main process of the system is not started. You can choose to log out of the current account, use ctrl alt del to start the task manager, and then choose to log out. After logging out, logging in again to the current account will generally return to normal.

4. The laptop has a black screen with only the mouse. Press Ctrl Alt Del on the keyboard to open the Task Manager window. After entering the window, we use the mouse to click the file in the upper left corner to select the button to run a new task, and enter the run command explorer in the pop-up window to create a new task.

5. The computer screen is black but the mouse can still move. The solution is as follows: directly press the ctrl alt delete key combination on the computer keyboard to open the task manager. Then click File in the upper left corner and select Run New Task.

What should I do if my laptop starts up with a black screen and only the mouse?

1. If the above method does not solve the problem, download "Driver Life" and upgrade: graphics card driver! Turn on the computer again. If it still doesn't work, you need to "one-click restore" or "reinstall the system". Before reinstalling the system, you need to back up important data to avoid losing it.

2. Press and hold the power button to force shutdown and restart the computer after a few minutes. You can try clicking F8 (win8 system: SHIFT F8) to select safe mode when booting to see if you can enter and conduct a comprehensive check. Kill the virus and uninstall the current graphics card driver. After restarting, reinstall the driver test from the official website.

3. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can use a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.

4. What to do if the computer starts up with a black screen and a mouse. Method 1: Restart the computer, press F8, enter the startup menu, and select "Use last known good configuration" to start the computer.

What should I do if my laptop turns on and the screen is black with only the cursor?

Because most black screens are basically caused by a service in Windows, restarting the computer can solve the problem of a black screen with only the mouse pointer. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

A black screen with only one cursor may be caused by system startup failure or hardware failure. The following are some possible solutions: Check the computer hardware connection: Check whether the computer hardware is well connected, especially check whether the memory, hard disk and graphics card are plugged in, and check whether the power supply is normal.

The repair is completed, restart the computer, and the problem may be solved. If you have entered the pe system and restored the system, or even reinstalled the system in pe, but it still looks like this after booting, you should be mentally prepared at this time. Because this may be a hardware problem.

First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.

If that doesn't work, you can enter the safe mode of the system. After entering, do anti-virus and repair the missing system files. The windows 10 system hard shuts down three times (forcefully press the power button for 10 seconds) and automatically appears in advanced mode and then enters safe mode. A black screen is more likely to occur when a laptop starts up, especially in some older computers or pre-assembled computers.

Solution to the problem of a black screen with only mouse arrows when the Lenovo laptop starts up: First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive.

Lenovo computer starts up with a black screen and only the mouse is displayed

1. After starting up, the screen is black and there is a mouse, which means that the resource manager is not loaded, or the loading fails. You can bring up the task manager and enter explorer to restart. The desktop can be displayed. Reason for black screen: Black screen caused by software.

2. The solution to the Lenovo computer black screen with only arrows is: If you cannot see the desktop and enter the mouse-only interface, please try pressing winkey r, enter explorer and press Enter. See if you can see the desktop.

3. The reasons and solutions for Lenovo notebook black screen with only the mouse visible are as follows: Hardware problems, such as hard drive failure, it is recommended to replace the hard drive. The c drive is full, so it is recommended to clear the memory. Or the c drive is full, causing a system failure, and it is recommended to reinstall the system.

4. The black screen when the Lenovo computer is turned on and only the mouse is displayed may be caused by explorer.exe not completing loading. You can try to solve it yourself, hit the ctrl alt delete key combination, select Task Manager, click File - New Task, manually enter explorer.exe and hit the Enter key to see if it can return to normal.

The above is the detailed content of After turning on the laptop, the screen goes black with only the mouse. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:codercto.com. If there is any infringement, please contact admin@php.cn delete