How to set bios on Meijie motherboard?

php editor Xigua will introduce you in detail how to set the BIOS for Meijie motherboard. BIOS is the basic input and output system of the computer system. Correct settings can improve system performance and stability. On the Meijie motherboard, by pressing specific buttons to enter the BIOS interface, various settings can be adjusted, such as startup sequence, hardware detection, etc. You need to be careful when adjusting settings to avoid misoperation causing system failure. By correctly setting the BIOS, you can optimize computer operation and improve work efficiency.

How to set bios for Meijie motherboard?

The detailed settings of the Meijie motherboard BIOS are as follows:

Meijie BIOS (basically the motherboards of this model are similar). The prerequisite for setting up the optical drive startup is the optical drive or U disk optical drive mode.

Press DEL when booting to enter the BIOS, select the second one: Advanced bios Features to enter,

Then select the second one: Boot Device priority, enter and use - or the up and down keys to enter the CD -ROM is set in the front (if you use a CD-ROM with a USB flash drive, the logo of the USB flash drive will be displayed).

The third Hard Disk Drives is to choose the hard disk or U disk HDD mode to start.

The fourth CD/DVD Drives (will only be displayed if you have a CD/U disk-ROM) , select USB disk mode or CD boot. 】

Meijie motherboard bios?

1. Press ESC or F12 while turning on the computer to enter the bios setting interface.

　2. Enter the bios setting interface, then press to restore the bios default settings, then press save and exit.

　3. The computer automatically restarts. After turning it on again, the motherboard's bios settings can be successfully restored to the factory state.

The above is the detailed content of How to set bios on Meijie motherboard?. For more information, please follow other related articles on the PHP Chinese website!