How to install after downloading the win10 system iso file

After downloading the Win10 system ISO file, we can start the installation. Below, I will introduce you to the installation steps of Win10 system in detail.

Step One: Make a Boot Disk
Before installation, we need to prepare a bootable U disk or DVD disc. If you choose a USB flash drive, you also need to download a tool for making a boot disk, such as Rufus. Insert the USB flash drive or DVD disc and open the boot disk creation tool. Select the ISO file of the Win10 system that you downloaded previously in the tool, and select a USB flash drive or DVD disc as the target device. Click to start production and wait for the production to be completed.

Step 2: Set the boot sequence
Insert the prepared startup disk into the computer and restart the computer. During the restart process, press the corresponding keys (usually F2, F10, F12, etc., the specific key values ​​may vary according to different computer models) to enter the BIOS setting interface. In the BIOS setting interface, find the "Boot" or "Boot Sequence" option and set the boot sequence to U disk or DVD disc as the preferred boot device. After saving the settings, exit the BIOS setup interface.

Step 3: Start the installation
After the computer restarts, start booting from the U disk or DVD disc. If everything goes well, the computer will enter the Win10 installation interface. In the installation interface, select personal preferences such as language, time zone, keyboard layout, etc., and click Next.

Step 4: Installation settings
In the installation settings interface, there are two important options to choose from. The first is the installation type. Generally, we choose "Custom: Install Windows only (Advanced)" so that the system can be configured flexibly. The second is the installation location, select the disk partition where the system will be installed. If you only have one hard drive, you can choose the system to automatically allocate it. If you have multiple hard drives or want to custom partition the disk, please click "New" to set up. After setting up, click Next.

Step 5: Wait for installation
After confirming the installation settings, click Next and the system will start the installation. This process may take a while, depending on your computer configuration and how it was installed. While waiting, please do not turn off the computer or perform any other operations to avoid installation errors.

Step 6: Set personal information
After the system installation is completed, the computer will automatically restart. During the restart process, you will be asked to set personal information, including username, password, etc. Just follow the system prompts.

Finally, the system will enter the Win10 desktop interface. At this point, the installation of the Win10 system is completed.

To summarize, the steps to install the Win10 system are to first make a startup disk, then set the startup sequence of the computer, then start the computer from the startup disk, enter the installation interface, and make a series of settings, and finally wait for the installation to be completed. . Hope this article is helpful to you. If you encounter any problems during the installation process, please refer to Microsoft's official installation guide or seek professional help. I wish you a successful installation!

The above is the detailed content of How to install after downloading the win10 system iso file. For more information, please follow other related articles on the PHP Chinese website!