Home  >  Article  >  Computer Tutorials  >  Keepalived installation and VIP automatic drift

Keepalived installation and VIP automatic drift

王林
王林forward
2024-02-19 13:30:04841browse

Keepalived is a high availability solution based on LVS (Linux Virtual Server), which is mainly used for load balancing and failover in Linux environments.

Keepalived ensures service continuity and reliability by using virtual IP addresses (VIP) and health check mechanisms.

Among them, VIP automatic drift is a key feature of Keepalived, which allows the service to be seamlessly switched to the backup server when the main server fails.

This article will briefly introduce the installation and configuration of Keepalived to achieve high availability clusters. It is designed to provide guidance for beginners to help them master this key technology and improve their Linux system management capabilities.

Glossary

Before understanding the installation and configuration of Keepalived in depth, it is necessary to clarify the concepts of some key terms.

Keepalived

Keepalived is a software package for building high-availability Linux systems.

It works based on the VRRP (Virtual Router Redundancy Protocol) protocol and can automatically perform failover between hosts.

The main function of Keepalived is to provide failover and load balancing functions between multiple servers to ensure the continuity and reliability of services.

It is widely used in various high-availability solutions, such as network load balancers and Linux virtual servers.

Virtual IP address (VIP)

Virtual IP address (VIP) refers to an IP address that is not directly bound to a single network interface card (NIC), but is shared among multiple servers.

In a Keepalived configuration, VIP is used for failover between the primary and backup servers.

When the main server fails, VIP will automatically "drift" to the backup server to ensure seamless continuation of service.

This mechanism allows the client to continuously access services without knowing the specific configuration of the back-end server.

After understanding these key terms, it will be easier for us to understand the following content, including the parameter configuration of Keepalived and the working principle of VIP automatic drift.

Keepalived installation and VIP automatic drift

Parameter explanation

When configuring Keepalived, it is crucial to understand its main parameters and their functions.

Here, we will discuss some key configuration parameters to help you better understand and implement VIP automatic drift.

vrrp_instance

vrrp_instance Defines an instance of a virtual router.

This example contains a series of settings, such as the network interface used, priority and heartbeat check interval.

Each vrrp_instance can have its own set of VIPs for failover.

state

The

state parameter sets the initial state of the virtual router, which can be MASTER or BACKUP.

In actual deployment, one server is set to MASTER, while other servers are set to BACKUP.

interface

interfaceThe parameter specifies the network interface used by Keepalived to send VRRP broadcasts.

Typically, this should be the interface the server connects to the shared network.

virtual_router_id

virtual_router_id is a unique identifier used to distinguish different vrrp_instances.

Different virtual router instances in the same network should have different IDs.

priority

priority Defines the priority of the server in vrrp_instance. The higher the value, the higher the priority.

When the main server fails, the backup server with the highest priority will take over the VIP.

virtual_ipaddress

virtual_ipaddress block defines one or more VIPs associated with vrrp_instance.

These IP addresses will drift between servers during failover.

Understanding these parameters helps configure Keepalived correctly and ensures that VIPs can automatically drift to backup servers in the event of a failure.

Keepalived installation and VIP automatic drift

Running environment

In order to ensure that Keepalived can be installed and run smoothly, it is crucial to choose a suitable operating environment.

The following are the recommended environment settings and requirements:

operating system

Keepalived is primarily designed for Linux systems.

Recommended Linux distributions include but are not limited to Ubuntu, Debian, CentOS and Red Hat Enterprise Linux.

Make sure your system is up to date, or at least a supported version, for optimal performance and security.

Network Configuration

  • Make sure all participating servers are on the same network so they can communicate via VIP.
  • Assign each server a unique static IP address, these addresses will be used for normal network communication.
  • Make sure the network interface card (NIC) is configured correctly and the network connection is stable.

System Requirements

  • Based on the deployment scale, ensure sufficient CPU and memory resources. For small to medium-sized deployments, a general server configuration will suffice.
  • Ensure that the system has stable time synchronization. Using NTP service can ensure that the time between servers is consistent.

Software dependencies

  • Before installing Keepalived, ensure that the system has all required dependencies installed, such as IP routing and management tools.
  • If using a specific package manager (such as APT or YUM), make sure it is updated to the latest version.

Deploying Keepalived in the correct environment can help improve stability and reliability.

for example

Through specific steps and examples, we will show how to install Keepalived and how to configure it to achieve automatic VIP drift.

Install Keepalived

Update package list: Before installing, make sure your system package list is up to date. On Debian based systems you can use the following command:

sudo apt update

Install Keepalived: Use your package manager to install Keepalived. On Debian-based systems, use the following command:

sudo apt install keepalived

For other Linux distributions, please use the corresponding package manager command.

Configure VIP automatic drift

  • Edit the Keepalived configuration file: The configuration file is usually located in /etc/keepalived/keepalived.conf. You need administrator rights to edit this file.
  • Set vrrp_instance: In the configuration file, create or modify a vrrp_instance block. For example:
  • vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 100
    virtual_ipaddress {
    192.168.1.100
    }
    }

    In this example, VI_1 is the name of vrrp_instance, the status is set to MASTER, and the virtual IP address 192.168.1.100# is used ##.

    Configure the backup server: On the backup server, use a similar configuration, but change
  • state to BACKUP and set priority to a lower The value of the master server.
  • Restart the Keepalived service: After changing the configuration, restart the Keepalived service to apply the changes:
  • sudo systemctl restart keepalived
  • Through these steps, you can install and configure Keepalived on your Linux server to achieve automatic VIP drift.

    Summarize

    Through this article, Bu Nian introduces the installation and configuration process of Keepalived in detail, especially how to realize the automatic drift of VIP (virtual IP address).

    As a high-availability solution, Keepalived not only provides failover capabilities, but also enhances the stability and reliability of the system through its load balancing function.

  • The above is the detailed content of Keepalived installation and VIP automatic drift. For more information, please follow other related articles on the PHP Chinese website!

    Statement:
    This article is reproduced at:mryunwei.com. If there is any infringement, please contact admin@php.cn delete