The DRAM light on the motherboard is orange but there is no display

This article will explore the role of the DRAM indicator on the motherboard. When the DRAM light on the motherboard shows orange but nothing is displayed, it may mean that there is some hardware issue. In this case, this article will provide some suggestions to solve these problems.

The DRAM indicator light on the motherboard is orange, but there is no display

The motherboard is the core hardware of the computer and connects other hardware components such as CPU, RAM and hard drive. When there is a hardware problem, the motherboard will sound an alarm or display the problem through LED indicators. If the DRAM indicator light is orange but there is no display, you can try the following suggestions.

Perform a Hard Reset

Clear CMOS

Reseat your memory module and check each memory module

Flash your BIOS

The problem may be with your memory or CPU

Get professional support

Let’s take a look at all these fixes in detail.

1]Perform a hard reset

First try performing a hard reset to drain remaining charge and fix boot issues. Follow these steps:

Make sure your computer is turned off.

Disconnect all peripherals and unplug power cords.

Press and hold the power button for 30 to 45 seconds.

Connect the power cord and turn on the system.

Check whether the DRAM indicator light is on this time. If yes, then proceed to further troubleshooting methods.

2]Clear CMOS value

If trying to hard reset the system does not work, it is recommended to try clearing the CMOS. This requires opening the computer case and removing the CMOS battery, which is usually a small coin-shaped battery. Before doing this, make sure the computer is turned off. Also, unplug the power cord to avoid the risk of electric shock.

3]Reseat the memory module and check each memory module

Next, you should remove the memory stick and put it back in place. If you have multiple memory modules, start the computer using each memory module one at a time to determine whether the problem is related to a specific memory module. Additionally, we recommend that you clean your memory modules and memory slots regularly to ensure they operate properly and improve computer performance.

You can also try different combinations with your memory sticks. For example, if you have two RAM sticks and four RAM slots, try plugging them into slot 1 and slot 2, slot 2 and slot 3, and so on.

If you only have one RAM stick, insert it into all available RAM slots one by one and start your computer.

4]Flash your BIOS

You can also try flashing your BIOS. This method is also useful if you installed a new CPU or RAM and started experiencing no display issues after installation. Some motherboards support flashing the BIOS without CPU and RAM.

To flash the BIOS without CPU and RAM, the motherboard has a dedicated button. To perform this method, you need to download the latest version of BIOS from the official website of the computer manufacturer.

The steps to do this are as follows:

On a computer that is running normally, download the latest version of BIOS.

Insert the USB flash drive and format it to FAT 32 format.

Now, copy the BIOS file to the USB flash drive in the desired format.

Plug the USB flash drive into the dedicated USB port (see user manual).

Now, press the dedicated button on the motherboard to flash the BIOS. Make sure power is connected to the computer.

When the BIOS refresh process starts, the LED indicator on the motherboard starts flashing continuously. This indicates that the BIOS is being flashed. Wait for the LED to stop flashing. When it stops flashing, your BIOS will be updated to the latest version. This process may take 5 to 10 minutes. Therefore, you have to wait for the process to complete. Do not interrupt this process as this may damage your motherboard.

You can also see the beta version of your BIOS on the official website. We recommend that you do not download the beta version as it may cause trouble.

The above steps are general steps for flashing BIOS without CPU and RAM. But we strongly recommend that you refer to your motherboard's user manual to learn the exact method of flashing the BIOS without CPU and RAM. Following incorrect procedures may damage the motherboard.

The above is the detailed content of The DRAM light on the motherboard is orange but there is no display. For more information, please follow other related articles on the PHP Chinese website!