Many friends accidentally get viruses when using computers. At this time, we need to reinstall the system. Reinstalling the system is still troublesome, so how do you do it? Below I will share with you the detailed steps on reinstalling the system. I hope it can help you!
How to reinstall the system if the computer is infected
1. Safe mode anti-virus
When there is a virus in the computer, we should first try to kill the virus. However, sometimes the computer is infected and cannot run the anti-virus software. In this case, we can press F8 when booting the computer and choose to enter safe mode in the startup items. Here we can use the anti-virus software to check and kill the computer. When inspecting and killing, you should choose to conduct a comprehensive inspection and killing to avoid any fish slipping through the net.
2. Restore system anti-virus
If we have backed up the system, we can restore the system through the backed up system. Restoring the system will format the C drive, so the virus in the C drive can be eliminated. Even if some computers do not have a backup system, you can restore the system to the state it was in just after you bought it through the built-in factory reset function.
3. Reinstall the system and anti-virus
Preparation work
1. A computer that can be used with normal network connection.
2. An empty USB flash drive larger than 8GB.
U disk boot disk production steps
Note: During the production process, the U disk will be formatted, so please make sure to back up important files in the U disk. If the system needs to be installed on the C drive, do not place important files on the C drive or the desktop.
1. Exit the security software, run "System Home Installation Master" to view the precautions, and click "I understand".
#2. Select "U Disk Boot" and click "Start Production".
#3. A prompt will pop up to back up important data in the USB flash drive. If no backup is required, click "OK".
#4. Select the system image you want to install and click "Download System and Create".
#5. The components required for making the USB boot tool are being downloaded, please wait patiently.
#6. The system image is being downloaded, please do not close the software.
#7. The U disk boot tool is being made.
#8. The system image is being copied to the USB flash drive.
#9. When prompted that the creation is complete, click "OK".
10. Select "Simulated boot" and click "BIOS".
#11. When this interface appears, it means that the System Home Installation Master U disk startup tool has been successfully created.
Steps to install Win10 from USB flash drive
1. Find the USB flash drive startup shortcut key for your computer.
#2. Insert the U disk into the computer, restart the computer and press the shortcut key to select the U disk to start. After entering, use the ↑↓ keys on the keyboard to select the second [02] to start Windows 10PEx64 (network version), and then press Enter.
#3. After entering the PE interface, click the one-click reinstall system on the desktop.
#4. After opening the tool, click Browse to select the downloaded system image ISO in the USB flash drive. After selection, select the partition for system installation, usually Area C. If the software recognizes it incorrectly, the user needs to choose it by himself.
#5. After selecting, click Next.
#6. Just click on this page to install.
#7. The system is being installed, please wait.
8. After the system is installed, the software will automatically prompt that it needs to be restarted and the U disk must be pulled out. Please pull out the U disk and restart the computer.
#9. After restarting, the system will automatically enter the system installation interface. At this point, the installation is successful!
The above is the detailed content of How to reinstall the system if the computer is infected. For more information, please follow other related articles on the PHP Chinese website!

win10中提示80070035找不到网络路径的解决办法:1、单击“网络”,“打开网络和Internet设置”,选择“网络和共享中心”后再选择“更改高级共享设置”,然后勾选“启用共享以便可以访问网络的用户读取公用文件夹中的文件”;2、返回“网络和共享中心”单击“宽带连接”并选择“属性”,点击“网络”,勾选“microsoft网络客户端”即可。

win10找不到网络适配器驱动的解决办法:1、更新驱动程序,可以使用设备管理器来更新驱动程序;2、重新安装驱动程序,先卸载设备,再重启电脑;3、从制造商网站下载驱动程序;4、检查硬件故障。

win10自带的看图软件叫“Microsoft照片”,其下载方法是:1、打开win10电脑;2、在Microsoft Store中搜索“Microsoft照片”并下载;3、将照片查看器的默认软件设置为【照片】即可。

win10任务栏经常假死的原因是win10 64位系统可靠性不佳造成的,其解决方法:1、重启“windows资源管理器”;2、卸载冲突软件;3、重新“部署操作进程”;4、修复系统服务;5、通过powershell命令尝试修复;6、cmd中执行修复命令;7、针对右击任务栏应用图标时弹出菜单缓慢的情况;8、通过新建Windows用户来重置系统设置;9、还原系统。

win10更新后无法上网解决方法:1、检查网络连接,使用其他设备连接同一网络来确认网络是否可用;2、检查网络驱动程序,找到网络适配器,并检查是否有任何驱动程序更新可用;3、重置网络设置,打开“命令”窗口,输入“netsh winsock reset”和“netsh int ip reset”,然后重启;4、更新网络驱动程序;5、检查防火墙和安全软件设置,暂时禁用重新连接即可。

win10右键没有管理员权限的解决办法:1、在电脑桌面右键点击“此电脑”;2、在弹出的列表中找到“管理”,点击打开;3、依次选取“系统工具”->“本地用户和组”->“用户”;4、在中间栏找到并点击打开“Administrator”;5、取消勾选“账户已禁用”,然后点击“应用”和“确定”即可。

解决方法:1、先重启“Windows资源管理器”;然后以管理员身份运行powershell,执行命令重新部署进程;最后在“个性化”设置界面中,关闭加载最常访问列表功能。2、打开powershell窗口,利用命令检查并修复Windows文件。3、打开“本地组策略编辑器”,进入“内置管理员帐户的管理员批准模式”的属性窗口;然后在“本地安全设置”选项卡中,点击“启用”;最后重启电脑。

win10本地组策略编辑器找不到解决步骤:1、新建文本文档;2、打开文档,输入代码“@echo off...pause”;3、输入代码后,点击“文件”,选择“另存为”选项;4、在弹窗中,将文件后缀名改成“.bat”;5、鼠标右键点击.bat文件,点击“以管理员身份运行”;6、键盘按下“Win+R”打开运行,输入“gpedit.msc”并点确认;7、成功打开本地组策略编辑器。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Dreamweaver CS6
Visual web development tools

ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment

Safe Exam Browser
Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.

PhpStorm Mac version
The latest (2018.2.1) professional PHP integrated development tool
