Home  >  Article  >  Hardware Tutorial  >  30 series graphics card power supply

30 series graphics card power supply

WBOY
WBOYforward
2024-02-16 10:09:07972browse

30 series graphics card power supply

Is there any problem with the power supply of the Colorful 30 series graphics card?

A power supply with a rated power of 750 watts or a maximum power of 750 watts and two 8-pin graphics card power supply plugs should be sufficient.

Rated 650 is enough with an RTX3070. RTX3060 is almost enough with a rated 500W. Dual 8PIN is just a gimmick, and you don’t actually need that much power supply. Of course, two 8P pins are fully plugged in.

The announcement of the 30 series graphics card will undoubtedly bring the power consumption of the whole machine to a higher level. Let’s take the 3070 as an example. Compared with the 3070 of the Piao 2080ti, the power consumption will never be less than 300W. This also means that if you want to take advantage of the performance of the 3070, a power supply with a power supply higher than 600 watts is definitely indispensable.

How many watts of power supply should the 3060TI be equipped with? TI recommends using a power supply of more than 600 watts. The power of the 3060TI is only 180W, which is already very low compared to other graphics cards. However, a computer requires a lot of hardware and consumes a lot of energy, so you cannot just look at the power used by the graphics card.

The full load power consumption of Colorful RTX3060Ti is 200 watts, plus the power consumption of the CPU, motherboard and other hardware. Generally, graphics card manufacturers recommend using a computer power supply with a rated power of 600 watts and an 8-pin graphics card power plug.

Advantages: The graphics card of Colorful Tomahawk is a mid-range performance-level graphics card with high performance and cost-effectiveness, careful workmanship, good compatibility, and sufficient power supply; Disadvantages: The display interface of Colorful Tomahawk is too streamlined, with four Too few interfaces, poor heat dissipation of the graphics card, and poor display quality.

30803080TI3090, what power supply does the 30 series graphics card use?

1. However, based on the performance and power consumption ratio of the previous generation graphics card, the power consumption of the latest graphics card can probably be calculated. If 10700k is used as the CPU, the 3070 will need about 650 watts of power, the 3080 will need about 800 watts, and the 3090 will probably reach the terrifying 1000 watt range.

2. You can use the Huntkey power calculator online to simply calculate the full load power consumption of the computer configuration with this graphics card, and then choose a model with a rated power exceeding this power consumption value (preferably more than 60% as a reserved power (remaining) power supply is sufficient.

3. Because 3080ti is a flagship high-performance independent graphics card with extremely high power consumption, it may easily cause failure if the power supply is insufficient. The 750W power supply is not recommended. Even if the 3080ti is not overclocked, it is recommended to use an 850W power supply. If you want to play overclocking, it is recommended to equip it with 1000W.

4. A 650w power supply is enough. The maximum power consumption of the 3080 graphics card is within 350w. It is acceptable to use a minimum power supply of 650w. It is recommended to use an 800w power supply so that the pressure on the power supply is small.

5. Compared with the mainstream 600W-650W power supply, the RTX 3080 graphics card will occupy most of the power consumption, which is obviously unsustainable. It is recommended to use 750W or higher.

6. According to NVIDIA’s official website, RTX3090TI is recommended to use a power supply rated 850W and above. You can use three traditional 8PIN interfaces for power supply, or you can use a power supply line that supports PCI-e 0 450W output.

Can Xianma Higher level graphics cards are not supported. Secondly, you need to install the graphics card driver to ensure that the graphics card can work properly. The driver needs to be downloaded from NVIDIA official website.

Any power supply may burn out the motherboard and graphics card, but firstly, it is a small probability event, and secondly, 90% of such small probability events occur in off-brand copycat power supplies.

Watts of power. The latest 30 series graphics cards will also be officially released and available to players in mid-September. At the press conference, Huang only talked about the performance and price of the new graphics card, and did not mention the power consumption. However, based on the performance and power consumption ratio of the previous generation graphics card, the power consumption of the latest graphics card can probably be calculated.

30 series graphics cards are suitable for multiple settings

The advantage of large video memory is that RTX3060 has 12GB of large video memory, which has advantages for high-resolution games and is not easy to explode the video memory. In addition, the 30 series graphics cards are also supported by DLSS0, which greatly improves light tracing performance. The 3060 graphics card is suitable for multiple games.

This is embarrassing. Your i7 8700K can't even beat the i3 12100F. If you use an RTX 3 series graphics card, you can get an RTX 3060ti. But after changing the graphics card, you just turn on more special effects, and the FPS is slightly lower. On a high note, I don’t know what you are playing. It may be meaningless after changing. .

Therefore, it is recommended to choose at least 8GB of RAM or above. If budget allows, opt for 16GB or more of RAM. Graphics Card: The game requires high graphics card performance to ensure a smooth gaming experience. Therefore, it is recommended to choose a mid-to-high-end graphics card, such as NVIDIA AGTX1660 or AMD RadeonRX5600XT.

Gigabyte GeForce RTX 3080 GAMING OC 10G Magic Eagle Graphics Card Review NVIDIA officially released the RTX 30 series graphics cards based on the 8nm Ampere architecture on September 2, 2020.

How to use the atx3.0 power interface for 30 series graphics cards

Find the external power cord interface of the graphics card and confirm the type of interface. Generally, there are single 6-pin, dual 6-pin, 6-pin and 8-pin types. Then find the same type of power interface on the corresponding power supply; just plug the corresponding power supply directly into the corresponding interface of the graphics card. The following is a detailed introduction.

Find the external power interface of the graphics card. Nowadays, the external power interface of the graphics card is mainly 6-pin or 8-pin or 6-8-pin or dual 6-pin.

As long as there is an external power interface, the graphics card must be connected to the chassis power supply for normal operation. First find the power connector on the graphics card. Then find the 6 pin interface of the power supply and connect it. If the power supply is not enough or there is no 6-pin interface, you can use the following adapter cable to connect it. The white end is connected to the power supply.

) First find the dual 6-pin power connector on the graphics card. 2) Find the 6-pin graphics card power cord connector on the power supply. Note: If the card has 6 pins, use 6 pins. If the graphics card has 8 pins, use 8 pins. 3) Plug the 6-pin power supply directly into the 6-pin connector of the graphics card. All power connectors on the graphics card must be fully plugged in.

The above is the detailed content of 30 series graphics card power supply. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:codercto.com. If there is any infringement, please contact admin@php.cn delete