HP Zhan 86 set up USB disk boot

php editor Yuzi introduces you to a convenient method - "HP War 86 Setup U Disk Startup". In some cases, we may need to use a USB flash drive to start the computer, such as installing the system, repairing the system, etc. For HP Zhan 86 computers, setting up USB disk boot may be a bit complicated. In this article, we will introduce in detail how to correctly set up USB boot so that you can successfully use the USB flash drive to perform various operations. Let’s take a look!

There are many ways to reinstall the system from a USB flash drive, including setting up a USB flash drive to boot on an HP computer. The methods of opening the BIOS setup interface of different models of HP computers may be slightly different, but generally there is not much difference. You can refer to the following steps to operate. Please note that the following is for reference only. 1. First, insert the USB flash drive to be used into the USB port of the HP computer. 2. Turn on or restart the computer and press the power button. 3. While the computer is booting, press the F10 key quickly and continuously until you enter the BIOS setup interface. Some models may require pressing other keys, such as the F2 or ESC key. 4. In the BIOS setting interface, use the direction keys to select "Boot"

First, shortcut key to boot the USB disk

After pressing the power button to turn on the computer, click the F9 key continuously to display the boot menu . Use the up and down arrow keys to select the device that needs to be booted, usually a USB Hard Drive or USB disk name, and press Enter.

php Xiaobian Yuzi introduces a convenient method to you - "HP War 86 Setup U Disk Startup". In some cases, we may need to use a USB flash drive to start the computer, such as installing the system, repairing the system, etc. For HP Zhan 86 computers, setting up USB disk boot may be a bit complicated. In this article, we will introduce in detail how to correctly set up USB boot so that you can successfully use the USB flash drive to perform various operations. Let’s take a look!

2. You can also click ESC after booting to enter the Startup Menu menu, and then press F9 according to the prompts to enter the Boot Device Options, that is, enter the startup options menu, as shown in the following figure:

Another method is to set the U disk as the first startup item by entering the computer BIOS settings (used when the U disk cannot be selected when starting with shortcut keys). It should be noted that the method of entering the BIOS settings for USB boot may be different on different computers.

HP computers need to turn on the USB device to boot:

After inserting the USB boot disk, press the F10 key continuously during startup to enter the BIOS. In the BIOS, use the left arrow key to select Advanced, then select Boot Option, and press Enter to enter.

2. Confirm that the USB device boot option is checked as shown in the figure below:

3. Continue to pull down and arrange the USB hard drive in the UEFI Boot Order. In the first line, click Save to start through the USB device, as shown in the figure below:

After completing the selection, press the Enter key to enter our system tribe U disk boot main menu interface , as shown in the picture below:

Thank you for your support. If you find it useful, you can follow and like it

The above is the detailed content of HP Zhan 86 set up USB disk boot. For more information, please follow other related articles on the PHP Chinese website!