Can the official version of the CPU be illuminated by flashing the BIOS on the motherboard?

php Editor: Can the official version of the CPU run normally by flashing the BIOS on the Apple motherboard? This is a matter of great concern. In some cases, flashing a modified BIOS may bring about some functional enhancements and performance improvements, but there are also certain risks. Flashing a modified BIOS may cause the motherboard to be unable to properly recognize and be compatible with the official version of the CPU, or even cause hardware damage. Therefore, before performing any BIOS flash operation, it is recommended to carefully consider and understand the related risks to avoid irreversible consequences.

# Can the official version of the CPU be turned on by modifying the bios on the motherboard?

Answer: Yes, updating the BIOS on the motherboard can also light up the official version of the CPU.

As long as the CPU is modified and the CPU slot on the motherboard is not moved, you can change back to the previous CPU, but you may need to restore the bios settings or discharge the cmos. Be careful not to damage the socket, especially the Intel processor socket, which is very fragile.

If the motherboard slot is modified, it may not be possible to change it back, because the pins will be changed.

Does the e31230v5 motherboard need to be modified?

want.

Although BIOS magic modification can unlock the functions of E3V5, this operation is not suitable for everyone. If you do not have enough experience and skills, or are not familiar with BIOS modification, it is recommended not to perform this operation.

How to solve the blue screen after bios upgrade?

First of all, there are basically two reasons why updating the BIOS causes a blue screen. The first one is that CSM/UEFI is causing trouble. CSM is the compatibility support module of the motherboard. Many old motherboards do not have this module because they do not require CSM. The main function of CSM is to boot traditional MBR master boot record area hard drives so that they can start smoothly. However, MBR can only support a maximum partition of 2TB, so it has been replaced by GPT in the era of large-capacity mechanical hard drives, but CSM still retains support. .

UEFI is a new generation of unified extensible firmware interface. UEFI can quickly boot the system and has better performance when used with GPT partitions. So here’s the problem. If you use UEFI mode when installing WIN10, there will be no problem with normal booting. However, after updating the BIOS or restoring BIOS settings, the initial values ​​are in the CSM file, so you need to manually change it to UEFI mode. Can.

Take the Z390 platform at hand as an example. After booting into the BIOS, press F7 to enter the advanced mode and click SETTINGS.

Select the startup mode selection in the startup function option. After opening, there are UEFI and LEGACY UEFI. The latter is the compatibility mode UEFI. Generally, you can choose this mode. After selecting, press F10 to save and exit. If you can enter normally The system requires no other settings. If you choose to support WIN10 WHQL in the system configuration, there is only UEFI here. For AMD platform settings, just select UEFI mode in SETTINGS→Advanced→WINDOWS operating system configuration, and the startup mode will also change to UEFI.

The second reason for the blue screen is that the system startup disk is incorrect. This problem is especially likely to occur in computers with many built-in hard disks. This is because WINDOWS often inexplicably places some startup files on other partitions or even hard disks when installing the system, causing the computer to fail to boot normally if the startup sequence is wrong. So what we have to do is to reset the hard drive boot sequence after updating the BIOS.

Find the UEFI hard disk BBS priority at the bottom of the startup page

Select the hard disk with the system installed, and then select this hard disk in the UEFI boot menu. The order here is to select the system hard disk →Select the UEFI boot device (the hard disk where the system is installed).

After setting up, press F10 to save and exit. The main reasons for the blue screen when updating the system are these two. Firstly, the mode is wrong. Secondly, after the partition settings are reset, the system cannot find the corresponding startup file, so the blue screen is actually. Just reset it again. In addition, there may be slight differences in the settings of different motherboards, but the MSI CLICK BIOS 5 interface function menu is basically the same, and it is still easy to find in the general direction.

The above is the detailed content of Can the official version of the CPU be illuminated by flashing the BIOS on the motherboard?. For more information, please follow other related articles on the PHP Chinese website!