Home > Article > Computer Tutorials > How to prevent the hard disk from being recognized as a USB bootable disk
php editor Youzi brings you a practical guide on how to make the hard disk recognized as a USB boot. In the daily use of computers, we often encounter situations where we need to boot from a USB flash drive, but sometimes we may only have one hard drive available. So, is there any way to make the hard disk recognized as a USB bootable disk? Next, we will introduce you in detail several methods to realize the hard disk to be recognized as a USB boot, so that you can operate smoothly when needed.
Making u-boot U disk preparation tool:
1. U-boot U disk startup disk production tool
2. Before we need to prepare a U disk that can be used normally , it is recommended that you prepare a USB flash drive with a capacity of no less than 8g
1. First download the USB boot disk creation tool from the official website homepage and install it into the computer; as shown in the figure:
#2. After the installation is complete, open the software and insert the USB disk into the computer. The software will automatically recognize the information and name of the USB disk; as shown in the figure Shown:
3. No need to change any settings, just click "Start Making"; as shown in the picture :
Note: Regarding the writing mode and U disk partition, U Boot recommends the best mode for you. If there are no special needs, you do not need to make any changes.
#4. At this time, the system will pop up a warning prompt that all data on the USB disk will be cleared. Confirm that the USB disk is After there are no important files, click "OK" to start production. (If there are important files, please copy the files from the USB flash drive to another computer before starting the production); as shown in the picture:
5. It takes a while to make a USB boot disk. Please do not perform any operations related to the USB disk during the production process; as shown in the figure:
6. After the production is completed, the system will pop up a prompt box of "Do you want to enter simulated startup?", click "Yes" to conduct simulation testing; as shown in the figure:
7. Close it after entering the PE main menu interface. In this way, the USB boot disk creation is completed.
Note: The simulated startup is only a startup simulation. Do not perform any further operations. After the test is completed, press the key combination "ctrl alt" to release the mouse, and click the close icon in the upper right corner to exit the simulated startup test. as the picture shows:
The above is the detailed content of How to prevent the hard disk from being recognized as a USB bootable disk. For more information, please follow other related articles on the PHP Chinese website!