What to do if there is a blue screen and a black screen after installing the system from USB disk

php editor Banana will answer for you: A blue screen or black screen problem occurs after installing the system on a USB flash drive, which may be caused by the following reasons: 1. USB flash drive production problems, which can be solved by remaking the USB flash drive; 2. Hardware compatibility If the system file is damaged, try to repair or reinstall the system. Specific solutions: Re-create the USB flash drive, choose the appropriate USB flash drive tool, and ensure that the production process is correct; check the hardware compatibility, refer to the motherboard manual or official website to view the compatibility list; try to repair the system, use system repair tools or reinstall the system. If the problem is still not resolved, it is recommended to consult professional technicians or contact the computer manufacturer's customer service for further resolution.

1. The driver or software is incompatible

Solution: Try to enter the "safe mode" of the system, uninstall the incompatible driver or software, and restart the computer to fix it.

2. Poor contact or damage to the hardware

Solution: Hardware damage is a common method for ordinary people to deal with, so as to avoid unnecessary economic losses.

Bad contact? Open the case and use a hair dryer to blow away the dust in the case. Then unplug the memory module, hard drive, and graphics card, clean the contact points, and plug them back in. Then start the computer to see the effect.

3. System damage

If the problem is not solved by using the above method, it is likely that the system file is damaged and you need to reinstall the system.

Follow me for the next article "How to install the system using a USB disk".

The above is the detailed content of What to do if there is a blue screen and a black screen after installing the system from USB disk. For more information, please follow other related articles on the PHP Chinese website!