Can win7 boot USB flash drive be used to install win10?

php editor Xigua can tell you that yes, Win7 boot USB flash drive can be used to install Win10 system. By making the Win10 system image file into a bootable USB flash drive, you can select the USB flash drive as the boot device at startup, and then follow the installation wizard to complete the installation of the Win10 system. The advantage of this is that it can avoid the cumbersome process of using a CD to install the system, and it can also make system upgrades more convenient. However, it should be noted that some personal data may be lost during the installation process, so be sure to back up important files before operation. In short, you can easily install the Win10 system through a Win7 boot USB flash drive, giving your computer better performance and functionality.

I took the machine back to the store and looked at it. The Lenovo Yangtian series

machine has a factory date of leaving the factory at the end of 2020 and was purchased by the unit in June and July of 21. Been using it for just over a year. Without solid state, it would be unbearably slow.

Remove the side cover and front panel of the machine

Put the machine flat and lift up the hard drive shelf to have an unobstructed view to the inside of the machine. Still a familiar design.

There are two M.2 interfaces in the lower right corner of the motherboard, but there are no screw holes reserved. If you want to install an M.2 hard drive, you can consider using double-sided tape and sponge to fix it, or purchase an M.2 hard drive bracket for installation.

The SATA power supply still needs to be drawn from the motherboard.

But fortunately, the SATA power cable in the computer has two interfaces. No need to look for a small 4P power cord.

I have been using Maxxun 128G solid state and SATA solid state from three brands: Kingston, Maxxun, and Biostar, and basically there are no after-sales problems.

The mechanical hard drive is stuck on the side. Press the red jam below to remove the hard drive.

When the hard drive is removed, the small holes at the back are just for the solid screws.

#Use two small screws to attach the solid state to the hard disk rack.

There are only two screws on the solid state drive and it has been fixed.

I was afraid that the screw cap would come into contact with the circuit board of the hard drive, so I used A piece of black tape covers the screw cap to prevent short circuits.

After the solid state is installed, put the shelf down and close the front cover and side panels. Start installing the system.

WIN7 is installed, the speed is very fast

Basic configuration of the computer

Computer Manager boot speed is 13 seconds, Very OK, I will move it to the leader tomorrow to experience the feeling of turning a tractor into a Mercedes-Benz (*^▽^*)

The above is the detailed content of Can win7 boot USB flash drive be used to install win10?. For more information, please follow other related articles on the PHP Chinese website!