uStart windows8pe toolbox

For people nowadays, it is not difficult to reinstall the system, and there are many methods available online. However, for some novices, it is not easy to install a reliable system, and it is easy to get into trouble. So how can a novice reinstall the computer system more reliably and easily? The following will teach you how to reinstall the system suitable for novices.

Method/steps:
Method 1: Use the micro-pe tool to create a USB disk installation system

The specific operation can be divided into three major steps. The sequence is to make a boot disk - download the image - enter the PE installation system. The specific steps are as follows:

Make a boot disk:

1. Download and install the micro PE toolbox to the U disk (this The process will format the USB flash drive and the data on the USB flash drive will be cleared).

#2. Select [exFAT] as the format here.

Explanation: FAT32 type (a single partition cannot exceed 32G, a single file cannot exceed 4G) exFAT, NTFS type (computers with old motherboards may not recognize U disks)

3. Wait for the installation to complete.

Download the system image and put it into the boot disk

1. After entering the MSDN website, click [Operating System] to select the system image to be installed. , copy and paste the [ed2k] download code into Thunder download.

#2. Put the downloaded ISO image file into the [Boot U disk]. (It is forbidden to put it in the EFI disk)

Boot into the PE system and install it

1. Insert the startup disk into the computer and restart it, and set the U disk Entering the PE system is the first startup item. (Before entering the PE system, you need to know the shortcut keys for entering the Bios interface of each motherboard)

2. If it is an old motherboard, take Dell notebook as an example. Then just turn on the computer and keep pressing [F12].

#3. There is no graphical interface in the Bios of this old notebook. It is recommended to use Legacy as the boot. (The boot partition method corresponding to the boot must be correct, otherwise the computer will not be able to recognize the USB boot disk, resulting in the inability to enter the PE interface)

The boot methods are divided into Legacy and UEFI boot, follow the data storage structure in the figure below Just choose.

4. Click [Enter Set up] to enter the advanced settings and set the U disk as the first startup item. (No matter what the boot method is, Secure Boot# must be turned off, otherwise the boot disk cannot be recognized)

5. After setting the option of Bios to enter the PE interface , press [F10] to save the settings, and then press [ESC] to exit.

#6. In the pe system, you need to partition the disk first, open the [Partition Tool] on the desktop, and do the computer disk C/D/E/F Settings for frequently used preferences.

PS: The disk boot format here is the Mbr format corresponding to the data type Legacy explained by the editor above)

7. The next step is Partitioned, the details are as follows:

(1)Windows installation folder#Select the system image you just downloaded in the USB flash drive.

(2)Boot drive #(Because the notebook is set to Legacy boot, the disk type is Mbr format), select to save to the [C] drive.

If it is UEFI boot, you need to create another logical partition (esp) of about 200-300Mb.

(3) The location of the installation disk #It is the disk on the computer where the system image is installed. Generally, the default is [C] disk (system disk).

8. If the partition format for UEFI boot is GUID, then you need to create a logical partition (Esp) next to the C drive, which is about 300M or less, and then Save the boot driver to (local disk Z). Just change the step (2) just now, as shown in the figure below.

#9. Remember to align 4k sectors or 2048 (these two options are generally the default). PS: Remember to check Align Sectors, otherwise it will cause damage to the hard drive, reduce its service life, and may even cause data loss.

10. Выберите версию, установленную системой, нажмите [Начать установку], после чего вы сможете войти в новую систему.

Тогда давайте поговорим о том, как настроить загрузочный USB-диск для новой материнской платы UEFI? Сочетания клавиш для входа в интерфейс BIOS такие же, как и в предыдущих шагах. Просто нажмите и удерживайте соответствующую клавишу быстрого доступа. (PS: Потому что здесь была заменена только новая материнская плата)

Затем нажмите [F7], чтобы войти в дополнительные настройки, и установите параметр загрузки с U-диска # 1 вперед Вот и все. (PS: Система BIOS новых материнских плат обычно устанавливает загрузку UEFI по умолчанию, и все они поддерживают графические интерфейсы. Вы также можете изменить английский на китайский, что очень интуитивно понятно)

##Наконец, нажмите [F10] для сохранения и выхода (в это время вы можете отключить USB-диск #защита от дурака), чтобы предотвратить перезапуск и повторный вход в интерфейс BIOS. Далее метод установки образа системы на диск аналогичен описанному выше.

###

The above is the detailed content of uStart windows8pe toolbox. For more information, please follow other related articles on the PHP Chinese website!