What should I do if Lenovo fails to boot the system from the USB flash drive?

php editor Banana will introduce you to a common problem: the system cannot run normally after Lenovo starts up the USB disk. How to solve it? This situation may be caused by the system files in the USB disk being damaged or incomplete. There are two solutions: one is to re-create the USB boot disk to ensure that the system files are complete and correct; the other is to check the BIOS settings of the Lenovo computer to confirm that the USB boot options have been set correctly. By operating these two methods, you can successfully solve the problem that the system cannot run normally after the Lenovo boot USB disk is started.

Required tools/software

Start the U disk system installation image 1. Preparation work

1.1 Prepare a 32G blank U disk.

Download the USM all-in-one PE maintenance and production software and the required system installation ISO image file. Choose win7 or win10 according to the actual situation. This example uses win7 as an example.

2. Steps

2.1 First make a USB PE maintenance boot disk and start the USM production tool. The interface is as shown below:

In the boot mode, select UEFI Startup mode, default option, click "One-click creation", wait about 5 minutes to complete the creation of the boot USB flash drive, and copy the system image to the USB flash drive for backup.

2.2 Next, insert the prepared U disk into the computer, restart the computer, and keep pressing F12 to select startup options of different brands. The startup option selection will be different. Generally, Lenovo, HP brand f12, Dell f9, ASUS esc key, when the startup option selection appears, select the U disk to boot. If the motherboard hijacks uefi boot, select UEFI mode to boot. If the motherboard is older, Just use normal startup mode.

2.3 After booting to the PE system desktop, you can easily access files in the computer. If you have important data, make sure to back it up first. Then, open "Install System Program" on the desktop, and the program will automatically search for the system image file win7.iso. After selecting the desired system installation options, just click Next.

2.4 In the next step option, check "Load driver into system" and "Inject usb3.x and SrS driver", continue to click next step to start installing the system. In about 3 minutes, the system will be installed.

After 2.5 is completed, we restart the computer and wait for the system to be installed and configured. In this way, a new system installation is completed.

The above is the detailed content of What should I do if Lenovo fails to boot the system from the USB flash drive?. For more information, please follow other related articles on the PHP Chinese website!