Home  >  Article  >  Computer Tutorials  >  uefi cannot recognize USB hard drive

uefi cannot recognize USB hard drive

王林
王林forward
2024-02-09 12:00:211703browse

In recent years, with the rapid development of computer technology, UEFI (Unified Extensible Firmware Interface) has been widely used as a new firmware interface technology. However, sometimes we encounter a problem: UEFI cannot recognize the USB flash drive or hard drive. This problem has brought some trouble to our use. So, why does UEFI fail to recognize the USB flash drive or hard drive? How can we solve this problem? Next, let’s take a look at the relevant content compiled by php editor Xinyi.

uefi cannot recognize USB hard drive

It should be noted that under normal circumstances, computers with win7 installed are in Legacy MBR mode, while those with win8 and win10 pre-installed generally use UEFI GPT. mode, but if you want to convert win8 or win10 to win7 system, you need to modify the BIOS. When installing win764, you do not need to modify the hard disk mode. When installing win7 32-bit, you need to modify the hard disk mode to MBR. The editor of Quick Start will share it with you below. The settings for booting the USB flash drive in Legacy mode, but if your computer boots the USB flash drive in uefi mode, just disable Secure boot, and there is no need to modify anything else. If you don’t understand the question, please follow the quick start headline account and ask the editor.

Common setting options for disabling safe boot in Legacy mode:

If there are the following options, you need to modify them. If not, skip them. .

Restart the computer and press Del, F2, F1 and other keys to enter the BIOS. Different brands of computers have different methods of booting into the BIOS interface.

To disable secure boot, you need to set Secure Boot to Disabled. Some models may require a password to be set in the BIOS to perform this operation. You can find the "Set Supervisor Password" option to set the password (if you use a UEFI USB flash drive to boot, the USB flash drive will be recognized after disabling Secure Boot. If it is still not recognized, please follow the steps below to modify it).

2. Change CSM to Enable or Yes or ALWAYS to indicate compatibility

3. Set OS Mode Selection to CSM OS

4. Boot mode or UEFI mode or Boot List Change Option to Legacy, indicating the traditional startup method

5. Change OS Optimized Defaults to Disabled or Other OS, disable the default system priority settings

6. Set Fast BIOS Mode to Disabled# under the Advanced option

## Next, the quick start editor will take a common notebook as an example:

1. ASUS notebook does not recognize the U disk boot disk operation method

1. It does not stop when starting the computer Press F2 to enter the BIOS, press the → arrow key to go to "Security", select Secure Boot Control and press Enter, change it to Disabled;

uefi cannot recognize USB hard drive

2, then switch to "Boot", Select Launch CSM and press Enter, change to Enabled, press F10 to save and restart;

uefi cannot recognize USB hard drive

3. Insert the USB boot disk, restart and press Esc to recognize the USB boot disk. Select the U disk item and press Enter.

2. Solution to Lenovo notebook not recognizing the USB boot disk

1. Keep pressing F1 or F2 when starting the computer (some models need to hold down Fn at the same time) to enter the BIOS interface ;

2. Under Exit, select OS Optimized Defaults and press Enter, change it to Disabled or Others;

3. Then select Load Optimal Defaults and press Enter to load the settings;

uefi cannot recognize USB hard drive

4. Go to Startup or Boot, change CSM to Enabled, change Boot Mode to Legacy, and finally press F10 to save the changes and restart;

uefi cannot recognize USB hard drive

5. Insert the U disk and restart, press F12 or Fn F12 to bring up the boot menu, select USB HDD and press Enter to enter.

3. ASUS UEFI graphical interface motherboard does not recognize the USB boot disk solution

1. Restart and press F2 to enter the BIOS, click the "Advanced Mode" button in the upper right corner, and switch to the "Boot" option card, select OS Type and press Enter, select Other OS and press Enter;

uefi cannot recognize USB hard drive

2. Then change the Secure Boot state to Disabled. If it cannot be modified, go to main and select the bottom "Security" means Security, press Enter to enter;

uefi cannot recognize USB hard drive

3. Select Administrator Password, which is the administrator password, press Enter, and set the password. If it still cannot be changed, explain this This model may have disabled the ability to turn off uefi and no longer allows users to modify it.

uefi cannot recognize USB hard drive

4. Dell notebook does not recognize the U disk boot disk solution

1. Press F2 to enter the BIOS settings when booting, and press the → arrow key to switch to the Boot page ;

2. Select Secure Boot and press Enter to change it to Disabled, then change the Boot List Option from UEFI to Legacy, press F10 to save and restart;

3. Insert the U disk to restart and press F12. U disk boot disk option can be recognized.

5. Solution to HP notebook not recognizing the USB boot disk after shutting down

1. Restart the notebook and press F10 to enter the BIOS. If there is no response, press ESC during startup. In the following interface, press F10 again Enter the BIOS interface;

2. Under System Configuration, select Boot Options and press Enter to enter the settings;

3. Set Secure Boot to Disabled, then set Legacy Support to Enabled, press F10 to select Yes and press Enter. Save changes;

4. Insert the USB flash drive to restart and press F9 or press ESC first, then press F9 according to the prompts to select the USB flash drive option in the boot menu and press Enter.

The above is the detailed content of uefi cannot recognize USB hard drive. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:pc-daily.com. If there is any infringement, please contact admin@php.cn delete