search
HomeHardware TutorialHardware NewsLaptop black screen only shows mouse

Laptop black screen only shows mouse

Why is the screen black after turning on the computer and only the mouse arrow is displayed?

Because most black screens are basically caused by a certain service in Windows, restart the computer. The problem of black screen with only mouse pointer can be solved. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

The computer black screen may be caused by the system resource manager crashing. We first press the "ctrl alt delete" key combination on the black screen interface of the computer, select the task manager to open; find the file in the upper left corner, click "Run New Task"; then enter explorer.exe to confirm. Wait for the system to restart before you can use it normally.

"After the computer is turned on, the display screen is black and only the mouse is left." This phenomenon means that the system is loading, and you can enter the desktop after the loading is complete. When this situation occurs, it is judged that there is a problem with the system, such as too much system garbage, too much redundancy, or system hardware problems; such as a certain block of memory is damaged, a certain area of ​​the hard disk is damaged, etc.

When we see that there is only a mouse on the desktop, we can assume that the explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.

After the computer starts, although there is no display content, if the computer has the sound of normal operation, it means that the hard disk and memory are normal and the system is normal. It means there is a problem with the graphics card. If possible, try replacing a graphics card.

What to do if the laptop has a black screen but the mouse can move?

1. What to do if the laptop has a black screen and only the mouse can move? You can try restarting. Most problems can be solved by restarting. You can try to keep pressing the F8 key. If the interface shown below appears, it can start normally. If that still doesn't work, keep pressing the power button to force a shutdown and try turning it on again after a while.

2. Try to use system restore to restore the system. If an application or driver was recently installed on your computer, you can try to uninstall it before restoring the system. If none of the above resolves the issue, you may need to reinstall your operating system. Before reinstalling, important files and data need to be backed up.

3. It is recommended that you try restarting the computer first to see if the problem can be solved. If the problem persists, you can try troubleshooting by following the steps above.

After the laptop turns on, the screen goes black and only the mouse can be seen. Why is the black screen caused by software? Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.

A black screen may occur when the computer starts up because the motherboard, monitor and graphics card in the computer are damaged, or the computer configuration is too old. Most of the reasons are caused by process errors. You can follow the steps below to troubleshoot.

A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. If your computer turns on and a black screen appears, but the mouse arrow can move, it may be a problem caused by the explorer.exe system file.

The reason why a Lenovo laptop has a black screen when it starts up boils down to the following points: First, check whether the power contact connected to the laptop is good and whether the power indicator light is on. Friends who are qualified recommend using a multimeter to test whether the laptop power supply has power. Voltage output with the value indicated in the label.

The reasons and solutions for Lenovo notebook black screen with only the mouse visible are as follows: Hardware problems, such as hard drive failure, it is recommended to replace the hard drive. The c drive is full, so it is recommended to clear the memory. Or the c drive is full, causing a system failure, and it is recommended to reinstall the system.

When we see that there is only a mouse on the desktop, we can assume that the explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.

What should I do if my laptop turns on and the screen is black with only the mouse?

1. The problem of the laptop having a black screen and the mouse being able to move is usually caused by a problem with the system or hardware. Here are some possible solutions: Press and hold the power button for about 10 seconds to restart the computer. If the problem persists, try another method.

2. If the above method does not solve the problem, download "Drive Life" and upgrade: graphics card driver! Turn on the computer again. If it still doesn't work, you need to "one-click restore" or "reinstall the system". Before reinstalling the system, you need to back up important data to avoid losing it.

3. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.

4. What to do if the computer starts up with a black screen and a mouse. Method 1: Restart the computer, press F8, enter the startup menu, and select "Use last known good configuration" to start the computer.

The laptop starts up with a black screen and only the mouse arrows.

If the laptop shows that it is preparing for automatic repair when it is powered on, and then the screen is black with the mouse arrows moving, you can try to solve it by following the steps below: Wait for a while, it may take a few minutes. . The automatic repair process may take some time to complete.

The laptop starts up with a black screen and only the mouse arrow. This is caused by a problem with an important process of the system. The solution is as follows: Tools and materials: ASUS Fly Windows Task Manager.

Cause of black screen: Black screen caused by software. Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.

After the computer is turned on, it is found that the desktop is black and only an arrow is displayed. Solve this problem. Computer: Huawei MateBook System: Windows 10 Software: Local Settings Press the restart button on the computer, and then press and hold F8 on the keyboard.

Solution to the problem of a black screen with only mouse arrows when the Lenovo laptop starts up: First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive.

Press Ctrl Alt Del on the keyboard at the same time. Select "Start Task Manager" in the list. "Task Manager" will pop up. Use the mouse to click "File" - "New Task" in the upper left corner menu, and enter "explorer" in the pop-up "Create New Task" dialog box. ” Click “OK”.

The above is the detailed content of Laptop black screen only shows mouse. For more information, please follow other related articles on the PHP Chinese website!

Statement
This article is reproduced at:码农网. If there is any infringement, please contact admin@php.cn delete
5000元左右怎样组装电脑主机性价比最高?5000元左右怎样组装电脑主机性价比最高?Apr 23, 2024 am 09:07 AM

5000元左右怎样组装电脑主机性价比最高?建议选择R52600+B450M+8G*2内存条。1500上下,I59400F+B365+8G*2内存条1800上下散热器用原装,或者买个80左右的2铜管散热器即可。显卡选择RTX2060品牌推荐华硕技嘉微星七彩虹2200上下硬盘建议240GSATASSD固态+1T机械硬盘英睿达+西数190+270电源推荐航嘉鑫谷的450W或500W电源249(最低200)机箱看你喜欢咯,注意散热器高度和显卡长度一定要合理。喜欢别忘记关注哦。欢迎你的关注,有什么问题或建

华硕笔记本电脑怎么一键还原win7系统华硕笔记本电脑怎么一键还原win7系统Jul 13, 2023 pm 09:05 PM

相信很多朋友手中使用的是华硕win7系统电脑,然而有些用户发现自己正在使用的华硕win7电脑出现一些故障不能运行,这时我们就可以通过一键还原win7系统来解决,可是华硕笔记本电脑怎么一键还原win7系统呢?遇到问题不用担心,今天我们为你带来了win7系统还原教程。具体方法如下:1、按过电源键之后,马上不停的按F9,就会弹出下面这个界面。2、这里选择语言。3、恢复注意事项。4、让您选择恢复分区还是整个硬盘等选项。5、提醒备份文件问题。6、点击完成,恢复自动开始,等待恢复完成。以上就是小编带来的华硕

笔记本黑屏只显示鼠标笔记本黑屏只显示鼠标Feb 08, 2024 pm 01:06 PM

开机后屏幕黑屏,只显示鼠标箭头是什么原因因为大多数的黑屏基本是Windows中某个服务导致的这个问题,重启电脑就可以解决黑屏只有鼠标指针的问题了。方法二:电脑开机长按“shift”,菜单里面选进安全模式,可以正常登陆打开,然后重启电脑,基本就可以了。电脑黑屏可能是系统资源管理器崩溃。我们首先在电脑黑屏界面按下“ctrl+alt+delete”组合键,选择任务管理器打开;找到左上角的文件,点击“运行新任务”;接着输入explorer.exe确定。等待系统重启就可以正常使用了。“电脑开机后,显示屏黑

asrock主板bios设置asrock主板bios设置Feb 22, 2024 am 08:01 AM

asrock主板bios设置成中文1、华硕主板可在开机后按“DEL”或“F2”进入BIOS,可通过概要里面设置语言系统,选择我们使用的语言:将系统语言改成简体中文即可。,华硕电脑主板一般按Del或ESC键F2键进入BIOS,我这台电脑为Del键。2、华硕主板可在开机后按“DEL”或“F2”进入BIOS,可通过概要里面设置语言系统,选择我们使用的语言:将系统语言改成简体中文即可。3、开机按DEL进入BIOS。在BIOS主界面下方的EN中进行切换。BIOS是英文BasicInputOutputSys

电脑开机不到一分钟就自动关机电脑开机不到一分钟就自动关机Apr 06, 2024 am 10:01 AM

笔记本电脑开一会就自己自动关机是什么原因电源问题检查一下插头有没有接好,电源之类是否损坏或接触不良。电脑中毒笔记本自动关机了极有可能是电脑中了病毒,此时需用杀毒软件检查系统是否遭到了木马或者病毒的攻击。电脑系统中毒或中毒。2大风扇坏,大温差保护。3电源坏,或添加了新硬件,电源供电不足。4显卡或显卡风扇坏。5主板坏,主板芯过热。笔记本电脑自动关机的解决方法1。可能是叫修理商处理。原因一:因为你长时间未使用。解决方法:右击鼠标,选择显示设置,进行修改。为什么电脑开机一会儿就自动关机1、CPU或其它硬

笔记本开机显示logo后黑屏什么原因笔记本开机显示logo后黑屏什么原因Feb 11, 2024 pm 10:10 PM

电脑刚开机显示logo,然后就黑屏了,显示灯都还亮,甚至电量不足都有警示...1、第一种原因是系统故障。如果你的电脑的系统出现问题了,比如安装的补丁不兼容,或者是软件不兼容,或者是驱动不兼容,还有就是系统的本身缺少了一些文件就会导致黑屏。2、主要是CMOS设定错误,设定第一个初始化的显示卡为PCI或者是板载AGP显示卡,但是显示器却没有接在相应的位置,结果电脑正常启动,可就是显示器不亮。3、拔下显卡和内存条,橡皮擦擦,再用毛刷,清理插槽灰尘和风扇,更换内存插槽等!5。再不行,下载“驱动人生”,升

忘记电脑开机密码怎么重新设置忘记电脑开机密码怎么重新设置Feb 07, 2024 am 10:36 AM

电脑忘记开机密码怎么解决啊!1、有四种方法可以一试:如果是普通账户密码忘了请用第一种方法。2、登录:如果管理员Adminstartor帐号没有设置密码,可以在开机登录界面,左手按Ctrl+Alt,然后右手连按两下Delete键,调出管理员登录框。不要输入任何密码,直接按“确定”就可登录系统。3、电脑设置了开机密码后,每次电脑启动后就会显示要求输入密码的界面;如果忘记了开机密码,如何快速解决呢。4、可以通过CMOS放电来清除开机密码,打开机箱,找到主板上的一个小电池,然后拔出来大概等10分钟左右再

驱动精灵是干嘛的?-驱动精灵和驱动人生哪个比较好?驱动精灵是干嘛的?-驱动精灵和驱动人生哪个比较好?Mar 19, 2024 am 09:50 AM

驱动精灵是一款集驱动管理和硬件检测于一体的、专业级的驱动管理和维护工具。驱动精灵为用户提供驱动备份、恢复、安装、删除、在线更新等实用功能。驱动精灵软件功能驱动精灵除了驱动备份恢复功能,又提供了Outlook地址簿、邮件和IE收藏夹的备份与恢复。简体中文、繁体中文、英文、法文、西班牙文、俄文用户界面供选择。驱动精灵对于手头上没有驱动盘的用户十分实用,用户.可以通过本软件将.系统中的驱动程序提取并备份出来,可以使用这个文件一键还原所有的驱动程序。驱动人生和驱动精灵那个更好?答:综合来讲应该是驱动人生

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Tools

SublimeText3 English version

SublimeText3 English version

Recommended: Win version, supports code prompts!

SAP NetWeaver Server Adapter for Eclipse

SAP NetWeaver Server Adapter for Eclipse

Integrate Eclipse with SAP NetWeaver application server.

WebStorm Mac version

WebStorm Mac version

Useful JavaScript development tools

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

MinGW - Minimalist GNU for Windows

MinGW - Minimalist GNU for Windows

This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.