The mac file is damaged after decompression (mac decompression error)

php editor Baicao introduces you to a common problem: when we decompress files on Mac, we sometimes encounter the prompt "mac file is damaged after decompression (mac decompression error)". This problem may cause us to be unable to decompress files normally, causing us inconvenience. In this article, we will explore the possible causes of this problem and provide some solutions to help you solve this annoyance.

Why does file decompression always show damage

1. The downloaded file is damaged due to poor network transmission conditions. The RAR archive provided by the site is inherently damaged.

File corruption is one of the most common reasons for decompression failure. When there is a problem with the file we download during the transfer process or the storage medium, the file becomes corrupted. To resolve this issue, we need to re-download the file and make sure there were no issues during the transfer.

If it keeps showing that the file is damaged during the decompression process, it may be because the downloaded file itself has been damaged during compression. You can try to decompress other files. If other files can be decompressed normally, the problem is likely to be with the received file itself.

Why does it show that the file is damaged when decompressing the file?

1. There are several reasons why the password error is prompted only halfway through decompressing the compressed file: poor network transmission conditions The downloaded file is damaged. The RAR archive provided by the site is inherently damaged.

2. When the file is decompressed, it always shows that it is damaged. It is very likely that the file has been damaged during the download process. You can try to decompress other files. If other files can be decompressed successfully, the problem is likely to be with the received file itself.

Failure to decompress the file may be due to file corruption or an error in the decompression program. The solution is as follows: 1. Redownload the file: If the file you downloaded is damaged, try redownloading the file and decompressing it. 2. Use another decompression program: Try using another decompression program to decompress the file. Sometimes a different program may be able to successfully decompress the file. Hope these methods can help you solve the problem of file decompression failure.

4. The decompressed file name or path may be too long, which may cause the opening to fail. Try placing in the root directory or a single level folder and reduce the filename and path length. It may cause the decompressed file to be damaged.

Cause: The compressed package is damaged. Find the damaged RAR archive, right-click and select the "Extract File" command.

The Mac software appears [Corrupted and cannot be opened. You should move it to the Trash], which should be solved like this...

For the problem that the Mac prompts that it is damaged and cannot be opened, you can try the following operations to solve it: 1. Open the Terminal program, which you can find in the Applications folder. 2. Enter the following command in the terminal: sudo spctl --master-disable 3. After pressing the Enter key, you will be asked to enter your password. 4. Enter your computer system password and press Enter. 5. After completing the above steps, the issue should be resolved and you can try opening the corrupted app again. With the above steps, you should be able to solve the issue where your Mac says it is corrupted and cannot be opened.

2. Solution to the prompt "XXX is damaged and cannot be opened. You should move it to the trash": Open the terminal, enter the command: "sudo spctl --master-disable" and press Enter ; Prompt "Password:" Enter the Mac system password (the password entered here will not be displayed) and press Enter.

3. Open System Preferences - Security & Privacy - General - Any Source.

4. You can check whether the extension of the software is wrong, or you can try to delete it and download the installation package again.

5. This is a prompt only for the new system macOS Catalina version. In fact, this prompt is the same as 114: "XXXX" is damaged and cannot be opened. You should move it to Trash. It's the same, only the prompt text has changed on the Catalina system. .

What should I do if I decompress a zip file on Mac and get a cpgz format file?

1. Use other browsers to re-download the zip file. If you downloaded it using Firefox, Safari, Chrome, etc. zip files, sometimes it's just a matter of re-downloading before decompressing.

2. In the folder containing the decompressed files, select the files and folders you want to recompress. You can hold down the Ctrl key (or Cmd key if you're using a Mac) and click on each file and folder, or hold down the Shift key and click on the first and last files/folders to select multiple consecutive files/folders. project.

3. Use the archiving utility to decompress zip files. Mac’s own archiving utility can decompress and compress files in zip format. In the Mac system, we do not need to open the archive utility. We only need to double-click the zip format file or right-click and select "Open" to automatically decompress it.

4. After the download and installation are successful, open "Launchpad" and you will see "The Unarchiver". Then let's try to decompress a rar file.

5. For compressed files on MacBook computers, you can directly compress and decompress them by selecting the file from the right-click menu, which is very convenient and convenient. It also supports decompression of all common formats such as 7Z, ZIP, ISO, etc. As long as you have MyZip, you don't need any other decompression software.

Solution to the problem that the file is damaged when Apple Mac installs NTFS

1. It cannot be used if the format is different. Apple's format is: Mac Extended (Journaled), and Windows' format is For NTFS, you just need to format the USB flash drive.

2. First, open the terminal, find and launch the console (Launchpad) in the system's Dock bar, the terminal is in the "Others" folder by default. Then, enter the code: sudo spctl --master-disable (master is preceded by two dashes). Note that there are spaces in the red box.

3. Solution: Right-click on the RAW format drive letter, select Properties, then select Security, delete useless users, add your own user name, and then change the permissions.

Solutions for file decompression failure and compressed file that is damaged

1. Download the file again: If the file you downloaded is damaged, try to download the file again and decompress it. Use another decompressor: Try using another decompressor to decompress the file. Sometimes different decompression programs handle different files differently.

2. Method 1: Rename the file. Try changing the extension of the original file to a common compressed file format, such as .zip or .rar. Then try opening the file using compression software to see if that solves the problem. Method 2: Use repair tools There are some tools available that are specifically designed to repair compressed files.

3. File corruption. There may also be errors in the decompression software itself, causing decompression to fail. We need to update or replace the decompression software to ensure that the files can be decompressed normally. The file name is too long. If the file is password protected, we need to enter the correct password to unzip the file. If the password is incorrect, decompression will fail.

4. The solution is as follows. 1. First, find the compressed package in question and right-click on the compressed package. 2. After clicking, a menu will pop up. Select the "Unzip File" item in the pop-up menu. Press the Win E key combination to open the resource manager, enter the corresponding directory and find the abnormal compressed file.

5. First, find the compressed package in question and right-click on it. 2. After clicking, a menu will pop up. Select the "Unzip File" item in the pop-up menu. 3. After clicking, select the "Keep damaged files" item at the bottom of the new window, and then click "OK" to start decompression.

6. Methods to solve the problem of damaged and lost compressed files: Method 1: Repair the compressed files through the built-in repair function of the computer. Open your own computer to check what compression software is used in the computer. The more common one is WinRAR. When you open the decompression software, you can see the built-in repair function of the software.

Conclusion: The above is all the content about mac files that have been damaged after decompression compiled by this site. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.

The above is the detailed content of The mac file is damaged after decompression (mac decompression error). For more information, please follow other related articles on the PHP Chinese website!