


php editor Banana will introduce to you how to transfer files from Mac to hard drive. In the daily use of Mac computers, we often need to back up some important files to an external hard drive to prevent data loss or computer failure. Transferring files to the hard drive can be accomplished through a variety of methods, including using Finder, terminal command lines, and third-party tools. Below we will introduce these methods in detail to help you easily complete the file transfer operation.
How to copy files to a mobile hard drive on a MAC computer?
First, connect the mobile hard drive to the computer. Then, click the [Launchpad] icon at the bottom, as shown in the figure below. Next, in the pop-up window, find and click the [Photo] icon, as shown in the figure below.
The steps to copy photos from Mac to the hard drive are as follows: First connect the mobile hard drive to the computer, and then click the [Launch Pad] icon at the bottom. In the pop-up window, find and click the [Photo] icon. After opening the [Photos] window, hold down the [Shift] key and select all the photos in sequence. Next, click the [File-Export-Export X Photos] option. In this way, you can export the photos to the connected external hard drive.
Go to the official website to download the genuine installation package. After the installation is complete, find the software in Mac system preferences and open it. Click "Volume" and you will find that the previous USB flash drive has been mounted.
Check the partition format of the mobile hard disk. If it is displayed as NTFS format, you cannot create a new folder by right-clicking. But this problem can be solved using Mounty11 software, which can help us copy files to NTFS formatted storage devices.
When the mobile hard disk is reformatted into FAT32 format, you need to back up the data saved in it first. Then, you can copy the data on your mac to the mobile hard drive. But be aware that the FAT32 format has a limitation, that is, the size of a single file cannot exceed 4G. Therefore, make sure you do not exceed this limit when copying files.
First click on the gas starter below, then click on mounty, there is online software. After opening, the menu bar appears like a mountain. Plug the removable hard drive cable into your Mac and click on the hard drive on the desktop. Finally drag the file to the removable hard drive.
How to copy photos from mac to hard drive
1. First, connect the mobile hard drive to the computer. Then, click the [Launchpad] icon at the bottom, as shown in the figure below. Next, in the pop-up window, find and click the [Photo] icon, as shown in the figure below.
First, find the photo folder that needs to be transferred. Right-click on the folder and select the "Copy" option. Next, insert a new hard drive and open its directory. Right-click the mouse in a blank space of the directory and select the "Paste" option. Then, wait patiently for the file transfer process, and do not unplug the hard drive during this process.
First, find the photos you want to copy to the hard drive on your Apple computer. Assume these photos are stored on the desktop. Place the mouse on the picture, right-click, and select "Copy Picture.JPG" in the pop-up option box to complete the copy.
4. Usually, after connecting the hard disk to the Mac, the hard disk icon will appear on the desktop. At this time, we can select the file and drag it directly to the external hard disk.
5. Connect the hard drive: Connect the hard drive to the USB port or Thunderbolt port of the Apple computer. Open the Photos app: Open the Photos app on your Apple computer. Select photos: Select the photos you want to export in the Photos app.
How to copy things from Apple computer to mobile hard drive
1. The steps to copy photos from Mac to hard drive are as follows: First connect the mobile hard drive to the computer, and then click on the bottom The [Launchpad] icon. In the pop-up window, find and click the [Photo] icon. After opening the [Photos] window, hold down the [Shift] key and select all the photos in sequence. Next, click the [File-Export-Export X Photos] option. In this way, you can export the photos to the connected external hard drive.
2. Install NTFS for Mac correctly. After the Mac system restarts, open System Preferences to find the software icon. Under normal circumstances, after the software is installed, when you insert the ntfs file system disk again, you can immediately store, create, and delete files on the disk normally, and you can use it directly without any other software settings.
3. Check the partition format of the mobile hard disk. If it is displayed as NTFS format, you cannot create a new folder by right-clicking. But this problem can be solved using Mounty11 software, which can help us copy files to NTFS formatted storage devices.
4. First, find the photo you want to copy to the hard drive on your Apple computer. Here is an example of a photo stored on the desktop. Place the mouse within the picture and right-click. Then, the pop-up Click the copy image .JPG in the options box that comes.
5. Step one, click the "File" menu bar at the top of iPhoto, then click the "Export" button, see the picture below, go to the following steps.
6. Download the NTFS software below to your computer and double-click it. Drag the NTFS here into the application folder. 2. Click NTFS for Mac.app to install and then open it. Enter your computer's own password and click Install Helper.
Why can’t I copy the files in the Apple computer to the mobile hard drive?
1. The hard drive is damaged or the hard drive file system is damaged. If there is some problem with the Mac system, connect the hard drive to the computer, or Most likely it won't work. Mac system failure If there is some problem with the Mac system, it is very likely that the hard drive will become inoperable even if it is connected to the computer.
2. The hard disk is not partitioned/formatted. In most cases, the manufacturer has partitioned and formatted the newly purchased hard disk before leaving the factory, and will pre-format the hard disk into usable files. System format. Therefore, we can use it directly after buying it.
3. The hard disk file system is not compatible with Mac computers. This is the most common reason why "Mac cannot copy and write files to the external hard drive". If your hard drive or USB flash drive is an NTFS file system, Mac does not have "write" permissions for NTFS-formatted hard drives, only "read" permissions.
4. What should I do if my Mac computer cannot copy files to the mobile hard drive? The editor will teach you the simplest way to solve it. The reason why it cannot store files normally is mainly caused by the disk file system format, which can be solved by a third-party software. First, you need to install a paragon ntfs for mac reading and writing tool on your mac.
Tutorial details: Mac cannot copy files to a mobile hard drive
1. The hard drive is damaged or the hard drive file system is damaged. If there is some problem with the Mac system, it is very possible to connect the hard drive to the computer. Unable to operate. Mac system failure If there is some problem with the Mac system, it is very likely that the hard drive will become inoperable even if it is connected to the computer.
2. Format the mobile hard drive and enter LaunchPad. Find Disk Utility and click to open it. Click on the mobile hard drive on the left and click "Erase" at the top.
3. First start our MAC and click Launchpad in the list on the left, as shown in the figure. Then click [mounty] to apply. If it is not available on the computer, we can download it from the software website, as shown in the picture. Afterwards, a mountain icon will be displayed in the upper menu bar, as shown in the picture.
4. The reason why it cannot store files normally is mainly caused by the disk file system format, which can be solved by a third-party software. First, you need to install a paragon ntfs for mac reading and writing tool on your mac. This software can be downloaded directly from the official website. Double-click the NTFS for Mac software installation package to start the installation.
5. The hard disk file system is not compatible with Mac computers. This is the most common reason why "Mac cannot copy and write files to the external hard drive". If your hard drive or USB flash drive is an NTFS file system, Mac does not have "write" permissions for NTFS-formatted hard drives, only "read" permissions.
Conclusion: The above is all the content about transferring files to the hard drive on Mac compiled by this site. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.
The above is the detailed content of Transfer files to hard drive on mac (how to transfer files to hard drive on mac). For more information, please follow other related articles on the PHP Chinese website!

ip与mac绑定是指将特定的IP地址与特定的MAC地址关联起来,使得只有使用该MAC地址的设备才能够使用该IP地址进行网络通信。ip与mac绑定可以防止被绑定的主机的IP地址不被假冒,前提条件:1、MAC地址是唯一的,并且不可假冒;只能绑定与路由器直接相连的网络上的主机(也就是主机的网关在路由器上)。

mac版下载的意思是当软件在选择安装时,选择MAC版下载;Windows版和MAC版是两个不同的操作系统,所以大多数软件在选择安装的同时需要选择Windows版还是MAC版。

mac鼠标滚轮相反的解决办法:1、打开mac电脑,点击屏幕的苹果标志,然后选择“系统偏好设置”;2、在“系统偏好设置”窗口中,选择“鼠标”;3、在“鼠标”窗口中,将“滚动方向:自然”前面的勾去掉即可。

修复 SMB 文件共享在 MacOS Ventura 中不起作用的问题从 Apple 菜单打开 Mac 上的“系统设置”应用程序转到“常规”,然后转到“共享”找到“文件共享”的开关并将其关闭通过转到 Apple 菜单并选择重新启动来重新启动 Mac重新启动后,返回共享系统设置面板并将“文件共享”重新设置为打开位置像往常一样恢复文件共享,它应该按预期工作如果 MacOS Ventura Mac 与另一台 Mac 或设备之间的文件共享突然再次停止工作,您可能需要在几天后或随机重复此过程。

显示器关闭时如何防止 Mac 休眠如果您希望 Mac 显示器能够在整个计算机不进入睡眠状态的情况下关闭,请在此处进行适当的设置调整:下拉 Apple 菜单并转到“系统设置”转到“显示”点击“高级...”切换“防止显示器关闭时电源适配器自动休眠”的开关现在 Mac 显示屏可以关闭,同时防止 Mac 本身进入睡眠状态。这可能主要与 Mac 笔记本电脑用户相关,但即使是那些没有 MacBook 的用户也可能会发现该功能很有用。

mac的shift键是fn键上方、caps lock键下方的一个键,该键在键盘最左侧,由右下往上数第2个键;shift键是键盘中的上档转换键,可以通过“Ctrl+Shift”组合键来切换输入法。

mac克隆全称mac地址克隆,是固化在网卡上串行EEPROM中的物理地址,通常有48位长。mac克隆一般应用在路由器上,用户在用电脑直接拨号上网,后来又加了个路由器,通过路由器来实现多台电脑同时上网,这时要用到mac地址克隆了,就是把当前的电脑的mac地址克隆到路由器中去,因为运营商是把你的电脑mac地址绑定你的账号的,所以得克隆以后才能用。

mac解压rar的软件:1、The Unarchiver,是一款完全免费、小巧,而且非常易于使用的压缩、解压缩小工具;2、Keka,是一款免费、实用的压缩、解压缩工具,支持解压缩RAR格式的压缩包;3、360压缩大师,是一款免费的压缩、解压缩软件,完全支持RAR文件解压;4、MacZip,支持包括RAR在内的超过20种压缩格式的解压;5、BetterZip;6、FastZip。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

PhpStorm Mac version
The latest (2018.2.1) professional PHP integrated development tool

MantisBT
Mantis is an easy-to-deploy web-based defect tracking tool designed to aid in product defect tracking. It requires PHP, MySQL and a web server. Check out our demo and hosting services.

SublimeText3 Linux new version
SublimeText3 Linux latest version

SecLists
SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function
