Water cooling motherboard interface

What is the interface of aiopump

1. aiopump is a dedicated interface for water-cooled pumps. aiopump can be connected to the computer motherboard, and the computer motherboard can be monitored. Pump means "pump". There are many interfaces on the motherboard, some have names, and some do not. If the wrong interface is plugged in, an error is likely to occur.

2. Special interface for water-cooled pump. ASUS aio-pump is a dedicated interface for water-cooled pumps. If you have split water cooling, this is usually connected to a water cooling pump. Aipump is the power supply interface of the water pump and can be monitored through the computer motherboard. Pump means "pump".

3. The aiopump is a dedicated interface for water-cooling pumps and can be connected to the computer motherboard. If you have split water-cooling, it is usually connected to the water-cooling pump.

4. aiopump is a special interface for water-cooling pumps. If you are using split water-cooling, it is usually connected to the water-cooling pump. aiopump mainly provides power for the water pump, and the computer's motherboard can monitor it.

5. The two interfaces CPU_OPT and AIO_PUMP are used to connect the water-cooling pump. Different motherboards have different names. Some motherboards will be marked as CPU_OPT, some as AIO_PUMP, and some motherboards. Both of these will be marked at the same time. SYS_FAN is used to connect the chassis fan, which is called CHA_FAN on some motherboards.

Where to plug the water-cooled light line into the motherboard

1. The first method is to connect the Cooler Master Ice God G360 Fantasy water-cooled light line to the 5V 3-pin ARGB interface of the motherboard, that is Just like we usually connect the equipment that needs to synchronize lighting with the motherboard to the motherboard.

2. This 3-pin fan interface can be directly plugged into the 4-pin fan interface on the motherboard. Just align it with the small baffle of the fan interface and insert it. This 4-pin interface is compatible with both 3-pin and 4-pin plugs. If the number of 4-pin interfaces on the motherboard is not enough, you can use an adapter cable.

3. This can be plugged into any chassis fan power supply interface on the motherboard. It is usually white. There will be two or three such interfaces on the motherboard.

Which interface on the motherboard should the integrated water cooling be connected to?

1. The small 3P male connector can be plugged into the motherboard. It supplies power to the water pump from the motherboard.

2. Pin motherboard fan interface. For the power supply cable of the integrated water-cooling head and water pump, find the 3-pin motherboard fan interface. These fan interfaces are usually on the edge of the motherboard, but do not plug them into the CPU fan. The CPU fan interface must be plugged into a fan. Just plug in the fan from the water-cooling slot.

3. Find the 3-pin motherboard fan connector. These fan ports are usually on the edge of the motherboard, but do not plug them into the CPU fan. A fan must be inserted into the CPU fan port. Just plug in the fan from the water cooling slot. good.

Which interface should the water-cooling fan be connected to?

After the computer water-cooling radiator 4pin cpu fan can be plugged into the cpu-fan 4pin interface, the motherboard can automatically adjust the CPU fan speed according to the CPU temperature. This needs to be done in It needs to be turned on in the BIOS. Some motherboards turn it on by default.

Relatively speaking, the fan is usually connected to the FAN interface, so that the fan can be controlled by the motherboard bios temperature control to reduce fan noise at a suitable temperature. The water-cooling pump is connected to the motherboard opt interface, so that the water-cooling pump can work in a balanced manner for a long time to prevent large changes in the temperature of the refrigerant.

The fan is usually 3-pin or 4-pin. If it is a CPU fan, it is best to connect it to the sys fan or cpu fan interface, otherwise there may be an alarm when booting or the system cannot be entered. It's okay if you connect it to another location, but you need to turn off the CPU fan detection function.

The water-cooling radiator of the CPU is plugged into the CPU_FAN. The water-cooling of the graphics card generally has a 4-pin power socket, which can be directly connected to the power plug; if there are multiple CPU fan plugs (small 3-pin), they can be connected to the motherboard Check to see if there is a socket such as CPU_FAN2. If not, you can plug it into SYS_FAN.

The CPU fan of the ASUS z270ar motherboard is connected to the CPU FAN. If the water pump fan has W_PUMP, connect to W_PUMP. If not, connect to the CPU OPT.

The next step is to install the CPU water cooling radiator on the CPU on the front of the motherboard. The water-cooling head installed on the motherboard is similar to the traditional air-cooling radiator. You need to apply silicone on the CPU first. This heat-dissipating silicone is also given when you purchase the water-cooling radiator.

The above is the detailed content of Water cooling motherboard interface. For more information, please follow other related articles on the PHP Chinese website!