Home  >  Article  >  Hardware Tutorial  >  Computer Solid State Drive Upgrade Guide

Computer Solid State Drive Upgrade Guide

WBOY
WBOYforward
2024-01-30 13:03:111135browse

Computer Solid State Drive Upgrade Guide

How to upgrade the solid state drive of old computers

1. First, check whether the computer has a SATA interface. The solid state drive needs to use the SATA interface to connect to the motherboard. If your old computer motherboard does not have a SATA interface, you cannot install a solid-state drive. Secondly, make sure your computer’s BIOS version is newer.

2. You can use the sata2 interface (as for on-site sata2 and sata3, the key depends on the interface). Although the SSD performance cannot be fully exerted, it should be significantly improved.

3. The speed is only over 200, which is still faster than ordinary mechanical hard drives. If the computer interface is SATA0, the speed can reach the fastest speed of 450ms, which is close to the theoretical speed of 500 in solid state. If your old computer uses the m.2 solid state with the new NVME interface, you will need to buy an adapter card installed in the PCI-E interface of the graphics card.

How to install a solid-state drive on a desktop computer

1. The method of installing a solid-state drive on a desktop computer is as follows: Prepare a SATA to USB cable, a data cable, and a hard drive bracket. Tools such as screwdrivers and screws are required. Use the SATA to USB data cable to connect the connector to the desktop computer.

2. Remove the side panel of the chassis to expose the motherboard inside the host. Prepare the SSD hard drive and SATA connection cable. Connect one end of the SATA cable to the SATA interface on the motherboard. Connect the other end of the SATA cable to the transmission interface of the SSD. Locate the SATA hard drive power supply wiring from the wiring leading out of the computer power supply.

3. The method of installing a solid-state drive on a desktop computer is as follows: Tools: ASUS desktop computer, Samsung 980Pro solid-state drive 512GB, hard drive heat sink, screwdriver. First, align the screw hole on one side of the solid-state drive with the protruding position in the bracket slot. Then insert the other side of the SSD and prepare the screw holes.

4. The specific steps on how to install a solid-state drive on a desktop computer are as follows: Prepare the solid-state drive and screwdriver. Open the chassis cover and identify the location of the hard drive and optical drive. The connecting cable on the mechanical hard drive is what we need to connect to the solid state drive; remove the cable.

How to install a solid-state drive in a notebook

1. The internal structure of the solid-state drive. Insert the solid state drive into the optical drive box. Remove the screw from the optical drive location. Use a screwdriver to push the metal piece down and the optical drive pops out. Place the optical drive box containing the solid state drive into the optical drive bay of the notebook. Remove the optical drive bezel. Install the bezel on the optical drive position. finished.

2. First remove the casing of the notebook. Some notebook hard drives have independent casings. After removal, you can directly see the location of the hard drive. Then use a cross-head screwdriver to remove the screws of the hard drive.

3. Laptops can be equipped with solid-state drives, but they require extra interfaces. It is recommended that you refer to the following methods: Materials required: laptop, solid state drive, screwdriver. Turn the notebook over and remove the 9 fixing screws on the bottom of the notebook. Unplug the optical drive.

4. The steps to set up a notebook after installing a solid-state drive are as follows: After installing the hard drive into the computer, turn on the computer and enter the desktop. Press the shortcut key win R to open the run window. In the run window, enter compmgmt. msc, and then click the OK button to open the Computer Management window.

How to add a solid-state drive to a computer

1. Before installing the solid-state drive, first take out all the things shipped with the solid-state drive; the more important ones are the solid-state drive main body and the solid-state drive installation. Brackets, screws, and data cables.

2. First of all, we need to prepare an M.2 solid-state drive and installation tools (screwdriver is enough), and open the side panel of the computer chassis. Find the M.2 interface location on the motherboard, and use a screwdriver to remove the screws from the M.2 slot on the motherboard.

3. Confirm the computer interface type: SSDs have different interface types, such as SATA, PCIe, etc. You need to determine the interface type of the old computer and select the SSD with the corresponding interface. Check whether the computer supports solid-state drives: Old computers may not support solid-state drives. You need to confirm whether the computer's motherboard supports it.

4. You can remove the original mechanical hard drive, or you can install two drives at the same time, keep the original mechanical hard drive, and then use the data cable to connect the solid-state drive to the computer.

5. Shut down the computer and unplug the power cord. Open the computer case, find a free 5-inch or 5-inch hard drive bay, and install the SSD in it. If you need to install the SSD in a 5-inch hard drive bay, you need to use an adapter bracket to fix it to the 5-inch hard drive bay. Connect the new SSD to the motherboard using a SATA cable.

The above is the detailed content of Computer Solid State Drive Upgrade Guide. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:codercto.com. If there is any infringement, please contact admin@php.cn delete