Why does Apple XR always disconnect when connected to Mac?

php editor Xiaoxin will introduce to you the reasons why Apple XR is disconnected when connecting to Mac. When we connect iPhone XR to Mac, we sometimes encounter unstable connection. This may be caused by a variety of factors, such as a loose USB cable, device driver issues, or operating system incompatibility. Next, we will analyze these possible causes in detail and provide solutions to help you solve the problem of iPhone XR disconnecting from Mac.

When the iPhone is connected to the Mac, it keeps flashing, charging and not charging...it keeps vibrating like this, why...

The reason why the iPhone keeps vibrating when connected to the data cable is because the phone is connected to the charger Caused by poor connection between devices (computers).

Please check the interface at the bottom of the device to make sure there are no impurities. If you are using a USB power adapter, make sure it is fully plugged in and the power outlet is working properly. If connecting to a computer, make sure the computer is turned on and can charge the device. You can also try a different USB cable, power adapter, or USB port.

The battery of Apple computers has a protection system. When the charging environment temperature is too low or too high, the battery will automatically activate the overheating or underlow protection mechanism. Especially when the temperature is lower than 15℃, the charging speed will slow down, and when the temperature is lower than 5℃, charging will stop. This is to protect the safety and life of the battery.

Most of the time it is because the USB cable is not in good contact, so it is recommended to change the cable.

Connect your iPhone to your MacBook Air using a data cable, and open the iTunes software to view device information. On the left side of the iTunes library, click the device icon to view device information. In addition, you can also connect iPhone and MacBook Air via data cable and open iTools Pro software to view detailed information. In the software interface, click the "More" option to view more detailed device information.

Mac connection to iPhone keeps disconnecting

1. I tried unplugging and reconnecting multiple times, but the result was invalid. Restart Xcode and reconnect again, but the result is invalid. Restarted the Mac and reconnected, but the result was invalid. I changed my colleague's data cable and the result was invalid. I bought a new Apple data cable that was claimed to be original online, but it didn't work.

2. It may be caused by poor contact of the USB port, or it may be oxidized due to long-term exposure to the air. If the data cable used is not original or not certified by Apple, it may cause unstable data transmission. It is recommended to replace it with a certified data cable. In addition, if it is already plugged into the computer, trying to charge it may fail.

One of the solutions is to turn off the battery percentage display. Although it does not work every time, this method occasionally has a certain effect after personal testing. The specific principle is not yet clear. In addition, you can also adjust the battery mode of your iPhone device to low power mode. The specific steps are: Open Settings-Battery-Select Low Power Mode.

When no device is connected for a long time, the personal hotspot will automatically disconnect. If you need to disconnect your device, you can turn off the personal hotspot, turn off Bluetooth, or unplug the USB cable.

5. When connecting Mac to iPhone, I found frequent flickering. Solution: Open Terminal, enter $ sudo killall -STOP -c usbd command and press Enter to close the process. Plug in the iPhone, connect normally, and the problem is solved.

What should I do if my iPhone keeps flashing when connected to Mac?

1. Use the data cable to connect the iPhone to the MacBook Air and open the iTunes software to view the device information. On the left side of the iTunes library, click the device icon to view device information. In addition, you can also connect iPhone and MacBook Air via data cable and open iTools Pro software to view detailed information. In the software interface, click the "More" option to view more detailed device information.

2. Experience sharing from experienced drivers of Guofenbang: According to our experience, 80% of screen flickering problems are caused by graphics card problems. You need to replace the graphics card with a new one, but you can leave the specific details to us. You do the maintenance. .

3. When the iPhone cannot be connected to the Mac computer, please unlock the iPhone first and confirm whether the computer has been trusted. Sometimes the data cable power interface at the bottom of the iPhone may be blocked by some foreign matter. Once there is, you can try cleaning it before trying to reconnect.

Conclusion: The above is all the content that this site has compiled for you about the reasons why Apple Find it on this site.

The above is the detailed content of Why does Apple XR always disconnect when connected to Mac?. For more information, please follow other related articles on the PHP Chinese website!