search
HomeHardware TutorialHardware NewsWhat are the reasons why the screen goes black soon after booting?

What are the reasons why the screen goes black soon after booting?

What is the reason for a black screen on a laptop computer?

A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. There are many reasons for computer black screen failure, such as damage to the monitor, damage to the motherboard, damage to the graphics card, poor contact with the graphics card, damage to the power supply, damage to the CPU, etc. (1) The monitor is powered off, or the monitor data cable is in poor contact.

A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. There are many reasons for computer black screen failure, such as damaged monitor, damaged motherboard, damaged graphics card, poor contact of graphics card, damaged power supply, damaged CPU, excessive temperature of components, etc.

At this moment, you can shut down the computer, open the case, check the motherboard battery, and clean the gold fingers of the memory module and the memory module slot. Reasons for a black screen when the computer is turned on: loose monitor power cord, poor contact of the video signal line, loose memory module, loose graphics card, or problems with the monitor itself.

Just pull it out and clean it with an eraser. There are usually several possible reasons for a sudden black screen on a laptop: Power supply problem: The laptop's power supply has poor contact or is damaged, causing the laptop to fail to start. In this case, you can try to ensure that the power plug is plugged in properly. If it still doesn't work, you can try another power adapter.

If your laptop displays a black screen after unlocking, it could be due to one of the following reasons: Power issue: Make sure your battery is fully charged or connected to a power adapter. If your computer laptop does not have enough power, a black screen may appear.

The laptop screen suddenly goes black. There are usually several possible reasons: Power supply problem: The laptop's power supply has poor contact or is damaged, causing the laptop to fail to start. In this case, you can try to ensure that the power plug is plugged in properly. If it still doesn't work, you can try another power adapter.

What causes a black screen when a laptop starts up?

1. There may be incompatibilities between systems or programs. It is recommended to restore the system or reinstall it. It is caused by excessive temperature of the CPU or other hardware, incompatibility or failure of the memory and graphics card. Power failures and voltage instability can also cause automatic restarts.

2. Common reasons include: Power supply problem: The notebook computer cannot be powered normally, which may lead to a black screen at startup. Please check whether the power cord and power socket are connected correctly and whether the battery power is sufficient. Hardware failure: Hardware failure may cause a black screen at startup. This could be an issue with your monitor, graphics card, or other hardware.

3. Reason 3: Graphics card and motherboard problem. If the screen goes black after the notebook is turned on, but there is sound that can enter the system, and the external screen is still abnormal, it means that the graphics card or motherboard is faulty.

4. The possible reasons are as follows: motherboard failure, memory failure. If there are two memory sticks, it is recommended to unplug one memory and keep one memory to try to boot. If it does not work, replace the other memory and try to boot. Test it. If it's a motherboard problem, I suggest you send it in for repair. You can't fix it yourself.

5. When the laptop is turned on, the screen is black but the keyboard light is on. I think the cause of this fault is as follows: When the computer is in sleep mode, the computer will run in a low power consumption state, and the display will be turned off at this time.

6. Graphics card or monitor problems: These two devices account for a large proportion of black screen failures when the computer is turned on. The replacement method is usually used to use another monitor. If it is used normally, it means that the original monitor is broken.

Why does the laptop screen go black after booting up?

Common reasons include: Power supply issues: The laptop’s failure to provide normal power may result in a black screen when booting up. Please check whether the power cord and power socket are connected correctly and whether the battery power is sufficient. Hardware failure: Hardware failure may cause a black screen at startup. This could be an issue with your monitor, graphics card, or other hardware.

If your laptop displays a black screen after unlocking, it could be due to one of the following reasons: Power issue: Make sure your battery is fully charged or connected to a power adapter. If your computer laptop does not have enough power, a black screen may appear.

Black screen caused by software. Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.

The screen is black when the laptop is turned on but the keyboard light is on. I think the cause of this fault is as follows: When the computer is in sleep mode, the computer will run in a low power consumption state and the display will be turned off.

Why does the Lenovo laptop have a black screen after startup?

System updates, incompatibility after automatic updates lead to a black screen, you need to uninstall the latest update to solve it. Power failure problem, let the notebook charge for a while, then try to turn it on again while charging. If the system fails, call the laptop after-sales service number for repair.

Insufficient battery It may be because the battery is low: we can connect the power supply and wait for a moment to restart. Graphics card failure Select to replace the graphics card. If your laptop supports external monitors, you can find a good monitor and connect it to your laptop.

Causes of static electricity. Sometimes static electricity can cause abnormalities in the notebook motherboard circuit, resulting in no response on the screen after the computer is turned on and powered on. We can try to unplug the battery and power supply of the notebook, and then press the power button of the notebook several times to let the machine discharge the static electricity.

The reason and solution for the black screen of Lenovo laptop that cannot be turned on: The motherboard is not powered on.

Another situation is that when pressing the power button on the laptop, the laptop does not respond at all, and no indicator light comes on. This situation is mostly caused by a fault in the power supply line or the power button. Generally, users are advised to take it for maintenance if conditions permit. You can simply disassemble it and check it out.

What causes a black screen when a laptop starts up?

1. Common reasons include: Power supply problem: The notebook computer cannot be powered normally, which may cause a black screen when it starts up. Please check whether the power cord and power socket are connected correctly and whether the battery power is sufficient. Hardware failure: Hardware failure may cause a black screen at startup. This could be an issue with your monitor, graphics card, or other hardware.

2. Graphics card or monitor problems: These two devices account for a large proportion of black screen failures when the computer starts up. Usually, the replacement method is used to use another monitor. If it is used normally, it means that the original monitor is broken.

3. Reason 3: Hardware problem. Disassemble the notebook and check whether the hardware is loose. Generally, there will be an alarm sound if the hardware is not plugged in properly. A long sound means that the memory module is not plugged in tightly. A long sound and a short sound means that the memory module is not plugged in tightly. Or there is a problem with the motherboard, one long and two short indicates a graphics card error. If there is too much dust inside the laptop, it is best to clean it first.

The above is the detailed content of What are the reasons why the screen goes black soon after booting?. For more information, please follow other related articles on the PHP Chinese website!

Statement
This article is reproduced at:码农网. If there is any infringement, please contact admin@php.cn delete
华为P30反复重启的原因(揭秘华为P30重启问题背后的根源)华为P30反复重启的原因(揭秘华为P30重启问题背后的根源)Feb 02, 2024 pm 09:45 PM

华为P30智能手机反复重启的问题日益普遍,随着智能手机的普及和应用的增加,这个问题变得越来越常见。本文将探讨造成这个问题的主要原因,并提出相应的解决方案。硬件故障——电池老化电池的老化问题可能会导致华为P30反复重启、当手机使用一段时间后。电池内部电阻增加,电池容量减少,都可能导致电池的供电不稳定、从而导致手机反复重启。系统软件问题——系统崩溃华为P30系统软件出现问题也是导致手机反复重启的常见原因。系统可能会崩溃或出现意外错误,从而引发手机的自动重启,在一些极端情况下。第三方应用冲突——不兼容

华硕机箱风扇设置转速?华硕机箱风扇设置转速?Feb 02, 2024 pm 01:21 PM

华硕机箱风扇设置转速?调风扇的转速方法如下:开机,然后不停的按右边小键盘上的Del键,系统会进入BIOS设置里,然后按上下方向键选择PCHealthStatus,其中CPUSmartFanControl就是风扇调速,选择enabled就是开启调速功能。设定CPUTargetTemp=50度,CPUToleranceTemp=5度,CPUFanStopPWM(%)=30%;保存设定后重启电脑再次进入BIOS中,查看“PCHealthStatus”。仔细观察风扇值,明显看观察家CPU智能风扇功能已经

win11电脑屏幕黑屏但鼠标仍可移动的原因和解决方法win11电脑屏幕黑屏但鼠标仍可移动的原因和解决方法Jan 30, 2024 am 09:06 AM

我们在使用win11系统的时候会遇到电脑开机的时候只有鼠标能动,电脑是黑屏的状态,那么win11电脑屏幕黑屏但鼠标能动是怎么回事?详情用户们可以使用ctrl+alt+del快捷键打开任务管理器来进行设置,如果还不行的话可以直接的重装系统,下面就让本站来为用户们来仔细的介绍一下win11电脑屏幕黑屏但鼠标能动的解决方法吧。win11电脑屏幕黑屏但鼠标能动的解决方法解决方法一:1、使用ctrl+alt+del组合快捷键,点击打开任务管理器。4、找到卸载程序,点击查看已安装的更新。解决方法二:1、如果

win11系统磁盘占用100%怎么办win11系统磁盘占用100%怎么办Feb 04, 2024 pm 01:05 PM

用户可以在任务管理器中可以看见各种应用程序的运行状态以及电脑磁盘的占用情况等,那么遇到win11系统磁盘占用100%怎么办呢?下面小编就给大家详细介绍一下win11系统磁盘占用100%解决办法,有需要的小伙伴可以来看一下。win11系统磁盘占用100%的解决方法:方法一:1、按下组合快捷键"Ctrl+Alt+Del",在给出的页面中点击"任务管理器"。2、在新界面中,找到"进程"选项卡下方的"服务主机:unistack服务组"

win11关机后自动重启怎么办win11关机后自动重启怎么办Jul 01, 2023 pm 04:41 PM

win11关机后自动重启怎么办?最近小编的windows11电脑每次在关机之后,除非把电源直接关了,不然电脑总是自己就进行重启了。这到底是是什么原因,又应该如何解决呢?小编在网上查找了许多教程,终于顺利解决。很多小伙伴不知道怎么详细操作,小编下面整理了win11自动重启频繁解决指南,如果你感兴趣的话,跟着小编一起往下看看吧!win11自动重启频繁解决指南具体步骤如下:1、首先,右键“此电脑”并打开“属性”2、接着打开其中的“高级系统设置”3、然后打开下方启动和故障恢复的“设置”4、随后将“自动重

如何恢复出厂设置OPPO手机(简单操作,快速回到初始状态)如何恢复出厂设置OPPO手机(简单操作,快速回到初始状态)Feb 03, 2024 am 08:48 AM

有时我们可能需要恢复手机的出厂设置来解决系统问题或清理个人数据。在使用OPPO手机时,我们可以轻松完成这个操作。下面将详细介绍如何恢复出厂设置OPPO手机。1.准备工作2.了解出厂设置的含义3.备份重要数据4.进入设置界面5.寻找并选择“备份与重置”选项6.选择“恢复出厂设置”7.确认操作8.输入解锁密码或账户密码9.阅读警告提示10.选择要保留的数据11.开始恢复出厂设置12.等待恢复完成13.设置初始配置14.登录OPPO账号15.恢复个人数据1.准备工作:以便在需要时连接到电脑,并准备好U

如何使用Docker进行容器的故障恢复和自动重启如何使用Docker进行容器的故障恢复和自动重启Nov 07, 2023 pm 04:28 PM

Docker作为一种基于容器技术的轻量级虚拟化平台,已经被广泛应用于各种场景中。在生产环境中,容器的高可用性和故障自动恢复是至关重要的。本文将介绍如何使用Docker进行容器的故障恢复和自动重启,包括具体的代码示例。一、容器自动重启的配置在Docker中,通过在运行容器时使用--restart选项可以启用容器的自动重启功能。常见的选项有:no:不自动重启。默

bios英文怎么变中文?bios英文怎么变中文?Jan 30, 2024 pm 12:03 PM

bios英文怎么变中文?如果你的计算机的BIOS是英文的,你可以尝试以下方法将其变为中文:1.进入BIOS界面。开机时按下Del、F1、F2、F10或其他键(具体键位取决于计算机品牌和型号),进入BIOS界面。2.找到语言选项。在BIOS界面中,找到语言选项,通常在“Advanced”或“Setup”选项中。3.选择中文语言。在语言选项中,找到中文语言选项并选择。如果没有中文选项,可以尝试选择其他语言选项,例如日语或韩语,这些语言选项可能会有中文翻译。4.保存设置并退出。选择中文语言后,按照界面

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Tools

EditPlus Chinese cracked version

EditPlus Chinese cracked version

Small size, syntax highlighting, does not support code prompt function

Safe Exam Browser

Safe Exam Browser

Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

mPDF

mPDF

mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),