How to view details of mounted drives in Linux

In the Linux system, after installing the hardware device, you need to install the corresponding driver to make the hardware device interact with the system. For system administrators or Linux users, sometimes they need to know the details of the drivers installed in the system. Information Honglian Linux Forum facilitates management and maintenance. This article will introduce how to enumerate installed drives in Linux.

This article will introduce two ways to list installed drives in Linux:

Let’s introduce these two commands in detailLinux installation driver, and relevant examples will be given.

1. Use the lsblk command to list installed drives

lsblk is a command used to list block device information. It can list the installed c drive, partition, mount point and other information. Use this command to quickly view detailed information about the drives installed in the system. Enter the following command in the terminal:

lsblk

This command will list all block device information linux deepin in the system, including c drive, partition, mount point, etc. The output results include the name, size, type and other information of each device.

for example:

NAME MAJ:MIN RMSIZE RO TYPE MOUNTPOINT
sda8:00 80G0 disk
└─sda1 8:10 80G0 part /
sdb8:16 0100G0 disk /data

It can be seen that there are two c drives:

The size of sda1 is 80G and is mounted to the root directory. The size of sdb is 100G and is mounted to the /data directory.

2. Use the fdisk command to list installed drives

fdisk is a command used for c drive partition linux installation driver, which can list detailed information about the c drive installed in the system. Enter the following command in the terminal:

sudo fdisk -l

This command will list all the c drive information in the system, including the name, size, partition table type and other information of the c drive. Such as:

Disk /dev/sdb: 100 GiB, 107374182400 bytes, 209715200 sectors
Disk model: VBS fileIO
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 80 GiB, 85899345920 bytes, 167772160 sectors
Disk model: VBS fileIO
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xe29a7a02
Device Boot Start End Sectors Size Id Type
/dev/sda1* 2048 167772126 16777007980G 83 Linux

Judging from the output results, fdisk-l outputs more complete information. If you want to know more detailed information about the drive, it is recommended that you use the fdisk-l command.

The above is the detailed content of How to view details of mounted drives in Linux. For more information, please follow other related articles on the PHP Chinese website!