search
HomeComputer TutorialsComputer KnowledgeReasons and solutions for garbled numbers displayed when the computer is turned on
Reasons and solutions for garbled numbers displayed when the computer is turned onJan 25, 2024 pm 03:36 PM
Numbers appear when the computer is turned on

What’s the matter with all the numbers when the computer is turned on?

This is because the computer's operating system has crashed and can be solved by reinstalling it.

Reasons and solutions for garbled numbers displayed when the computer is turned on

Reinstalling the system is to reinstall the computer operating system. It is usually used to repair the system file damage or crash caused by user error or virus attack and unable to start.

Some computer users will choose to reinstall the operating system in order to optimize the system and make it work in the best condition when the system is running normally. There are usually two methods of reinstallation: overlay and new reinstallation.

Reasons and solutions for garbled numbers displayed when the computer is turned on

Extended information:

Since the computer has reported an error, it cannot enter the system. From the installation method, you can use the following steps:

1. Download the required system win7 iso image to the local hard disk, right-click and use WinRAR and other tools to extract it.

Reasons and solutions for garbled numbers displayed when the computer is turned on

2. Place the largest gho file such as win7.gho and the one-click ghost tool in the same directory, such as the D drive, not the C drive or desktop.

Reasons and solutions for garbled numbers displayed when the computer is turned on

3. Double-click to open the one-click ghost reinstallation tool, select "Restore Partition", select the win7.gho file as the image path, select the location of the system disk, such as C drive, or select the installation location according to the disk capacity, and click OK.

Reasons and solutions for garbled numbers displayed when the computer is turned on

4. A dialog box pops up, click Yes, and restart the computer immediately to restore the computer.

Reasons and solutions for garbled numbers displayed when the computer is turned on

5. After the computer restarts, the Onekey Ghost option appears in the startup menu, and the computer will automatically select this option to enter.

Reasons and solutions for garbled numbers displayed when the computer is turned on

6. Start to enter this interface, perform the operation of restoring the win7 system to the C drive, and wait for the progress bar to complete.

Reasons and solutions for garbled numbers displayed when the computer is turned on

7. After the operation is completed, the computer will automatically restart and continue to perform the one-click ghost reinstallation system win7 process

Reasons and solutions for garbled numbers displayed when the computer is turned on

8. The reinstallation process usually takes 5-10 minutes. After finally restarting and entering the new win7 desktop, the one-click ghost reinstallation process ends.

The computer cannot be turned on and the upper left corner of the screen keeps displaying the words "Digital Analog Digital Analog" but it just doesn't work

1. First, we conduct a comprehensive check on the connection between the computer monitor and the host, and re-plug each connection to see if there are any connection problems.

2. If the fault still exists, then we need to open the case to see if it contains metal or other substances that may cause a short circuit in the computer host circuit. Then we smell the computer to see if there is a burning smell. Look around the motherboard and around the CPU for damaged components.

3. After checking the entire chassis, if there is no abnormality in the chassis, we will treat the dust on the chassis.

4. If the computer cannot be turned on, then use the minimum system method to unplug the data cables of the hard disk, floppy drive, and optical drive, and then check whether the computer can be turned on. If a startup screen appears on the computer monitor, it means that the problem is in these devices. . Then connect more than one device to the computer one by one. When a certain device is connected, the fault reappears, indicating that the fault is caused by this device. Finally, focus on checking this device.

5. If the fault still exists, it is likely to be a fault with the memory card, graphics card, CPU, motherboard, etc. At this time, we only need to plug and unplug the hardware, or replace it again, and try one by one to find the cause. location.

6. If the memory, graphics card, CPU and other devices are normal, then discharge the BIOS, use the isolation method, place the motherboard outside the chassis, and connect the memory, graphics card, CPU, etc. for testing. If the computer can display, then try again Install the motherboard into the chassis and test until the cause of the fault is found. If the fault persists, the motherboard needs to be returned to the manufacturer for repair.

Why does a bunch of numbers pop up when I turn on my computer

Solution:

1) This is because the system is scanning your hard drive. It may be a problem caused by your own operation. If you shut down illegally, cut off the power directly or press the power button to turn off the power, the computer will check your hardware when it is turned on, including your hard drive.

There is also a problem with your computer's hard disk. It is recommended that you use the disk scanning tool that comes with your computer to scan and repair it. If it is more serious, use the following software to repair it (if it does not scan next time after this scan, it is normal) Scan, if the hard disk is always scanned when booting, please see below and try to repair the disk according to the following method).

2) If there is no illegal shutdown and there is no problem with the hard disk, and the system still scans when you turn on the computer, you can use the following method to remove the system from scanning the hard disk:

Click "Start/Run", enter "regedit" and press Enter to open the registry editor, select the "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager" subkey in sequence, and then find "BootExecute" in the right window Clear the key value items and their value data, and then restart (select the file export for backup before clearing, so that you can restore the backup if needed).

3) The system’s own disk repair method (if you always turn on the computer to check, use this method to repair a certain disk):

The specific steps are as follows: Select the drive letter in My Computer and right-click the mouse. In the pop-up drive properties window, select "Tools → Start Checking" and select "Automatically Repair File System Errors" and "Scan and Recover". Bad Sectors", and then click Start. The scan time will vary depending on the disk capacity and scan options (after following the above method, a box will pop up, click Yes, it will automatically shut down and then start up to repair).

Bad sectors on the hard disk will cause the computer system files to be damaged or lost, and the computer will be unable to start or crash. Bad sectors on the hard disk can be repaired using NDD Disk Utility or Scandisk.

4) If the problem still cannot be solved, restore the system or reinstall the system. If that doesn't work, format the hard drive, repartition the system, and reinstall the operating system. If that doesn't work, replace the hard drive.

The above is the detailed content of Reasons and solutions for garbled numbers displayed when the computer is turned on. For more information, please follow other related articles on the PHP Chinese website!

Statement
This article is reproduced at:Excel办公网. If there is any infringement, please contact admin@php.cn delete
How to Solve Windows Error Code "INVALID_DATA_ACCESS_TRAP" (0x00000004)How to Solve Windows Error Code "INVALID_DATA_ACCESS_TRAP" (0x00000004)Mar 11, 2025 am 11:26 AM

This article addresses the Windows "INVALID_DATA_ACCESS_TRAP" (0x00000004) error, a critical BSOD. It explores common causes like faulty drivers, hardware malfunctions (RAM, hard drive), software conflicts, overclocking, and malware. Trou

ENE SYS Maintenance: Tips and Tricks to Keep Your System Running SmoothlyENE SYS Maintenance: Tips and Tricks to Keep Your System Running SmoothlyMar 07, 2025 pm 03:09 PM

This article provides practical tips for maintaining ENE SYS systems. It addresses common issues like overheating and data corruption, offering preventative measures such as regular cleaning, backups, and software updates. A tailored maintenance s

5 Common Mistakes to Avoid During ENE SYS Implementation5 Common Mistakes to Avoid During ENE SYS ImplementationMar 07, 2025 pm 03:11 PM

This article identifies five common pitfalls in ENE SYS implementation: insufficient planning, inadequate user training, improper data migration, neglecting security, and insufficient testing. These errors can lead to project delays, system failures

How do I edit the Registry? (Warning: Use with caution!)How do I edit the Registry? (Warning: Use with caution!)Mar 21, 2025 pm 07:46 PM

Article discusses editing Windows Registry, precautions, backup methods, and potential issues from incorrect edits. Main issue: risks of system instability and data loss from improper changes.

Discover How to Fix Drive Health Warning in Windows SettingsDiscover How to Fix Drive Health Warning in Windows SettingsMar 19, 2025 am 11:10 AM

What does the drive health warning in Windows Settings mean and what should you do when you receive the disk warning? Read this php.cn tutorial to get step-by-step instructions to cope with this situation.

How do I manage services in Windows?How do I manage services in Windows?Mar 21, 2025 pm 07:52 PM

Article discusses managing Windows services for system health, including starting, stopping, restarting services, and best practices for stability.

which application uses ene.syswhich application uses ene.sysMar 12, 2025 pm 01:25 PM

This article identifies ene.sys as a Realtek High Definition Audio driver component. It details its function in managing audio hardware, emphasizing its crucial role in audio functionality. The article also guides users on verifying its legitimacy

why won't driver asio.sys loadwhy won't driver asio.sys loadMar 10, 2025 pm 07:58 PM

This article addresses the failure of the Windows asio.sys audio driver. Common causes include corrupted system files, hardware/driver incompatibility, software conflicts, registry issues, and malware. Troubleshooting involves SFC scans, driver upda

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
Repo: How To Revive Teammates
4 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
4 weeks agoBy尊渡假赌尊渡假赌尊渡假赌

Hot Tools

VSCode Windows 64-bit Download

VSCode Windows 64-bit Download

A free and powerful IDE editor launched by Microsoft

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

EditPlus Chinese cracked version

EditPlus Chinese cracked version

Small size, syntax highlighting, does not support code prompt function

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment