How to modify the font of LED display - detailed guidance

It is best to provide detailed guidance on how to change the characters on the LED display

The font of the LED display can be changed through a serial cable, U disk or mobile phone (or remote control). According to different operating methods, the font of the LED display can be modified.

1. Change the characters through the serial line

Connect the LED display screen to the computer, open the display control software, set the screen parameters, edit the font of the program, and click Send

2. Change characters through U disk

There is an option in the software menu. Click USB Download to save the setting parameters and content to a USB flash drive. When changing programs, just copy the contents of the USB flash drive to the LED display.

3. Change the words via mobile phone (or remote control)

You can send and change advertising subtitles by editing text messages

Warm reminder: LED displays usually use USB interface and COM interface to transmit data. You can choose to use the USB interface to transmit data to modify the display content, such as the common ledshow2012 and ledplay software (available for free download on the official website), and then modify it in the software. At the same time, you also need to set the screen parameters, which are related to the control card of the LED display. After completing the modification, click USB Download to download the modified content to the USB flash drive. Finally, insert the USB flash drive into the U port of the display screen.

In addition, you can also ask your LED display supplier to provide technical explanation and support. This is a quick way.

How to connect LED display to computer to set up and change subtitles

The setting steps are as follows:

1. Connect the LED display changing cable to the computer and open the LED desktop.

2. Detect communication parameters: Click the Settings button on the menu bar and select communication parameters in the drop-down box.

Click "Read Parameters" to check the communication parameters. If the reading is successful, the screen parameters will be checked. If the reading fails, the line will be checked to see if the connection is smooth.

3. Detect screen parameters: Click screen parameters to open the screen parameter setting dialog box.

4. After the screen parameters and communication parameters are read successfully, the text content can be changed. Click "Screen" → "Program" → "Subtitles" on the toolbar on the left side of the window to open it in sequence.

Set the input text content in the subtitle content, set the font and size (19), etc., set the subtitle height (32), width, horizontal and vertical coordinates (0,0), etc. in the form properties, and set the subtitles in the display properties. Set the subtitle display mode, cycle times, cycle speed, dwell time, etc.

5. After setting the font, click "Preview" to view the subtitles.

6. Click "Send". If the sending is successful, the change of screen content is completed.

LEDplay2 1How to change the screen text

How to change the characters on the LED display? Many friends have such doubts. Let’s talk about how to change the characters on the LED display. The engineers of Lianchengfa Group have something to say. First of all, you must know how to change the font on the LED display. There are usually three methods: serial cable, USB flash drive, and mobile phone (or remote control)

According to the corresponding operation method, you can operate how to change the words on the LED display.

1. Change the characters through the serial line

Connect the LED display screen to the computer, open the display control software, set the screen parameters, edit the font of the program, and click Send

2. Change characters through U disk

There is an option in the software menu. Click USB Download to save the setting parameters and content to a USB flash drive. When changing programs, just copy the contents of the USB flash drive to the LED display.

3. Change the words via mobile phone (or remote control)

You can send and change advertising subtitles by editing text messages

Warm reminder: LED displays generally use USB interfaces and COM interfaces to transmit data. The USB interface you choose transmits data to modify the display content, such as the common ledshow2012 and ledplay software (free download from the official website), and then modify it in the software. And set the screen parameters (this is related to the control card of the LED display). Then click USB download to download the content to be modified to the USB flash drive. Then connect the U disk to the U port of the display screen

The above is the detailed content of How to modify the font of LED display - detailed guidance. For more information, please follow other related articles on the PHP Chinese website!