Urgent need to teach how to set up the BIOS of Yeston motherboard

How to set the BIOS for Yeston motherboard?

1. First, during the power-on self-test process, press the Del key to enter the BIOS.

2. Press the → direction key to switch to Advanced, press the ↓ direction key to select Legacy USB Support, and press the Enter key to set it to Enhanced.

3. Then press the ↑ direction key to select USB Configuration, press Enter to enter, and set SATA Mode to IDE Mode.

4. Press ESC to return to the main interface, press the → direction key to switch to the Boot tab, use the ↓ direction key to select Boot Option #1, press the Enter key to pop up the dialog box, select the Recognize U disk option, and press Enter Click to confirm and the Yeston motherboard will be successfully set to boot from the USB flash drive.

How to enter the BIOS of Yeston motherboard?

There are many ways to enter the BIOS, but there are generally two ways to enter the BIOS of the Yeston motherboard: 1. Press the DEL key. When the computer is turned on, press the Del key when the startup screen appears, and press it several times to enter the BIOS setup interface. 2. Use hotkeys. If you need to quickly enter the BIOS, you can press the corresponding hotkey when booting, such as F2, F12, F10, etc. The hotkeys may be different for different brands and models of motherboards and computers. You can refer to the product manual or the manufacturer's website for detailed information. In short, the method of entering the BIOS may vary depending on the brand, model and settings, so users need to carefully read the product manual or refer to the relevant information on the manufacturer's website.

Yingtong motherboard bios settings for solid state drive startup?

How to start the solid state drive set by bios

1. Press and hold the DEL key when the computer is turned on to enter the BIOS

2. After entering the BIOS, use the up and down arrows to select System After Summary, press enter.

3. Then find Sata drive 0/1/2 and check whether the SSD you installed has been recognized.

4. After seeing the installed SSD, press the ESC key to return to the main interface, use the left and right arrows to select startup settings, use the up and down arrows to select Primary Boot Sequence, and click the Enter key to enter.

5. Use the up and down arrows to select the solid state drive (SSD) you installed, and press the " " key to adjust it to the first position (the top position).

6. After adjusting to the first position, press the F10 key to save the settings and exit. A window will pop up, select YES.

7. The computer restarts at this time. Keep pressing the F12 key during startup, and a dialog box will pop up: At this time, you can see that the installed intel SSD is already the first startup item. Press the enter key. .

The above is the detailed content of Urgent need to teach how to set up the BIOS of Yeston motherboard. For more information, please follow other related articles on the PHP Chinese website!