Foxconn FOXCONN N15235 motherboard cannot install operating system through USB flash drive

Foxconn FOXCONNN15235 motherboard cannot install the system from the U disk after setting the U disk to boot?

1. Turn on the computer and press DEL to enter bios settings.

2. Click EXIT in the upper right corner to enter the advanced settings and select the boot option.

3. Select the boot option priorities. Just set boot option #1 to USB. F10 saves and exits to boot via USB.

How to set up U disk boot and CD boot in the BIOS of foxconn motherboard?

If you are using a Foxconn motherboard, you can follow the steps below to set up U disk and CD boot:

1. Press "Delete", "F2", " F10" or "ESC" keys to enter the BIOS setup interface. Different models of Foxconn motherboards may have different keys to enter the BIOS settings. Please try the applicable keys according to your motherboard model.

2. In the BIOS setting interface, use the keyboard's direction keys (up, down, left, and right) to navigate and find the "Boot" option. This option may be in a different tab or menu.

3. After entering the "Boot" option, you can see a list of boot devices available for selection.

- To set up USB boot, find "Removable Devices" or similar option, move it to the top of the boot device list or select it as the preferred boot device.

- To set up CD booting, find the "CD/DVD-ROM Drive" or similar option and move it to the top of the boot device list or select it as the preferred boot device.

4. After adjusting the boot device sequence, press the "F10" key on the keyboard to save the changes and exit. You can also choose to save and exit according to the BIOS prompts.

5. Restart the computer and ensure that the U disk or CD is inserted into the corresponding interface. The computer will boot from the set boot device and enter the operating system installation interface of the USB disk or CD.

Please note that different motherboard models or BIOS versions may be slightly different, and the above steps are for reference only. If you have a specific Foxconn motherboard model, it is recommended to consult the user manual of that model or visit the official Foxconn website for more detailed instructions.

How to enter pe from foxconn motherboard?

Hello! To enter the PE system, you need to press the shortcut key F12 or Del when booting, and then select the USB disk to boot. If your computer has a Foxconn motherboard, you can refer to the following steps:

1. Insert the USB flash drive and open the USB boot disk creation tool.

2. Switch to "U disk boot-ISO mode".

3. Click "Generate ISO Image File", select the advanced version of PE, and click to create an ISO boot disk after the generation is completed.

4. When restarting the computer, keep pressing the U disk startup shortcut key (usually F12, Del, F11, F2, etc.). Different computer motherboards may have different shortcut keys.

5. After opening the startup selection interface, the option with the word usb or the brand of the U disk is usually the U disk. Use the direction keys "↑↓" to select it and press the Enter key to confirm to enter the PE selection interface.

6. Enter the PE selection interface. Generally, select "02WindowsPE/RamOS (new model)" and press Enter to confirm.

How to set the Foxconn motherboard to boot from the USB disk?

U disk as boot disk

1. Making a bootable U disk means making the U disk into a U disk with boot function, that is, turning the U disk into an optical drive. Just download any tool software on the Internet to make a bootable USB flash drive. The production methods of these software are very simple, and they are basically one-click production.

2. Put the downloaded system into the bootable USB disk. Because the USB boot disk is different from the optical disk and does not come with an operating system. However, this is also beneficial. We are not limited to the operating system of the optical disk. We can freely choose the operating system we want. When downloading, it is best to choose a large software website to avoid poisoning. Choose a file in ISO format and save it to a USB flash drive after downloading.

3. Set the computer to boot from the USB disk. Because the computer defaults to booting from the hard disk, we need to enter the bios and set it to boot from the USB disk.

4. After starting the computer with a U disk, you can enter an interface similar to the usual CD boot. However, the U disk boot does not have an operating system and cannot directly install the operating system, so we need to enter winPE installs the operating system. The above is the principle of using a U disk to install the system, including making the boot U disk, how to put the boot U disk into the system, setting up the U disk to start, and installing the winPE system. These four aspects are introduced in detail. I believe you will Have a certain understanding of USB disk installation systems.

The above is the detailed content of Foxconn FOXCONN N15235 motherboard cannot install operating system through USB flash drive. For more information, please follow other related articles on the PHP Chinese website!